TOOLS
-
Milwaukee M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Pin Detent (Tool Only)
$NZ625.00The M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Friction Ring delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, making it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE™ Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE® 1/2″ Mid-Torque Impact Wrench with Friction Ring is only 152 mm in length, providing users access to stubborn fasteners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™-ION battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
-
MILWAUKEE M18 FUEL™ 1/4″ BRAKING DIE GRINDER WITH SLIDE SWITCH (TOOL ONLY)
$NZ330.00The M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch delivers corded performance allowing users to remove up to 305mm of weld bead per charge on a M18B5. Equipped with RAPIDSTOP™ technology that provides braking in under 2 seconds, the M18 FUEL™ 1/4″ Braking Die Grinder with Slide Switch enhances safety while maximising productivity. The POWERSTATE™ brushless motor delivers 27,000 RPM and maximum power to allow users to maintain grinding power while in the tight spaces. The cordless braking die grinder has up to 55mm accessory compatibility for surface prep applications and material removal while featuring REDLINK PLUS™ Intelligence, an advanced system of cordless power tool electronics, for maximum performance and tool life.
-
MILWAUKEE M18 FUEL™ 1/4″ ONE-KEY™ BRAKING DIE GRINDER WITH DEADMAN PADDLE SWITCH (TOOL ONLY)
$NZ385.00The M18 FUEL™ 1/4″ ONE-KEY™ Braking Die Grinder with Deadman Paddle Switch delivers user demanded runtime with the ability to deburr up to 35 pipes on a M18B5. Milwaukee’s cordless Die Grinder offers variable speeds from 8,000 – 20,000 RPM to provide users the precision and power needed in key applications. Equipped with RAPIDSTOP™ technology that provides braking in under 2 seconds, the M18 FUEL™ 1/4″ ONE-KEY™ Braking Die Grinder with Deadman Paddle Switch gives users enhanced safety, while maximising productivity. Compatible with ONE-KEY™, the die grinder wirelessly connects to a smart phone to track and manage the tool, providing users with visibility to where tools are across their network of jobs. The POWERSTATE™ brushless motor delivers up to 20,000 RPM to allow users to maintain grinding power while in tight spaces. The cordless tool delivers up to 55mm cutting and 76mm sanding accessory compatibility for material removal and surface prep applications, and an LED worklight to enhance visibility. Milwaukee’s die grinder features REDLINK PLUS™ Intelligence, an advanced system of cordless power tool electronics for maximum performance and long tool life.
-
Milwaukee M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ (Tool Only)
The M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ delivers fast cordless riveting. It eliminates the need for hoses and compressors while delivering maximum life. This rivet gun significantly increases productivity and portability, and ensures a higher level of safety. The premium steel alloy 3-jaw design delivers more work between jaw changes. While lightweight, the M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ has been designed to withstand harsh shop or assembly plant environments. Manufactured with an all-metal gearcase, impact strength plastics, and protective over-mold the tool is designed for maximum durability. The POWERSTATE™ Brushless Motor delivers 2,041 kg of pulling force for high strength blind rivets in all materials. This rivet tool pulls up to 900 3/16” (4.76 mm) aluminium or 500 1/4” (6.35 mm) aluminium blind rivets on one charge with an M18™ REDLITHIUM™-ION 2.0Ah battery (not included). REDLINK™ PLUS Intelligence ensures maximum performance and protects the tool and battery against overloads, over-heating, and over-discharge. With ONE-KEY™ compatibility, the tool allows the user to track and manage the tool within their inventory.
-
Milwaukee M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ 152 mm (6”) Extension
The 6″ (152mm) Extension for the M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ allows the user to install rivets in hard-to-reach applications. The all-metal extension has a low profile with a diameter of only 34mm (1.34″), equal to the clearance of the standard outer jaw housing on the tool. The 152 mm (6”) Extension is compatible with the MILWAUKEE® M18 FUEL™ 1/4″ Rivet Tool with ONE-KEY™ (M18FPRT, sold separately)
-
Milwaukee M18 FUEL™ 125mm (5″) RAPID STOP™ Angle Grinder with Deadman Paddle Switch
The M18 FUEL 125mm (5″) RAPID STOP Angle Grinder is designed to complete the toughest grinding applications. The POWERSTATE Brushless Motor delivers up to 9000 RPM, while the RAPID STOP Brake performs at under a 3 second stop time. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over-discharge. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work.
-
MILWAUKEE M18 FUEL™ 150MM (6″) RANDOM ORBITAL POLISHER (TOOL ONLY)
$NZ529.00FEATURES
POWERSTATE™ Brushless Motor delivers 2,400-4,500 RPM with an 8-position speed dial and maintains speed under load gives the power to correct heavy defects.Frees you from cord management, maintenance, and the fear of surface damage with best-in-class clearance of more than 50mm from the battery to the work surfaceDelivers the runtime necessary to keep professionals productive during polishing and heavy correction applications when paired with M18™ REDLITHIUM™-ION HIGH OUTPUT™ 6.0Ah batteriesVariable speed trigger for greater precision and total user controlLock-on switch reduces user fatigue during extended useTotal control in polishing and heavy correction applicationsSPECIFICATIONS
PLATFORMM18 FUEL™POLISHING RPM2,400-4,500 RPMTRIGGER LOCKYesLENGTH439mmWIDTH66mmWEIGHT2.6kgORBIT21mmORBIT MOTIONRandomBACKING PLATE150mm (6″)BATTERY CLEARANCE56mm (with M18HB6) -
Milwaukee M18 FUEL™ 18 Gauge Brad Finishing Nailer (Tool Only)
$NZ742.00The M18 FUEL™ 18 Gauge Brad Finishing Nailer delivers peak productivity on the jobsite, providing users with the power to nail, without the hassle of a compressor and hose. Leveraging Milwaukee’s nitrogen air spring mechanism, the M18 FUEL™ 18 Gauge Brad Finishing Nailer allows users to consistently sink nails to the proper depth in hard and soft woods while leaving clean nail holes matching the head of the nail. The combination of the POWERSTATE™ Brushless Motor and REDLINK™ PLUS Intelligence delivers users the ability for fast nailing, with a fire rate of 3 nails per second (in contact actuation mode) with zero ramp-up time, for maximum efficiency throughout the day. Additionally, the nailer operates using our REDLITHIUM™-ION batteries (not included) and sealed compressed nitrogen to drive each nail, eliminating the cost of gas cartridges and maintenance associated with other nailers. The M18 FUEL™ 18 Gauge Brad Finishing Nailer is compact in size, and lightweight, providing the user with unmatched access into tight spaces and limiting fatigue with low recoil. The M18 FUEL™ 18 Gauge Brad Finishing Nailer delivers the pneumatic performance that professional carpenters and remodelers expect, with the freedom and convenience of cordless technology.
-
Milwaukee M18 FUEL™ 184mm Dual Bevel Sliding Compound Mitre Saw (Tool Only)
AVAILABLE INSTORE ONLY – NOT ABLE TO BE SHIPPED
The M18 FUEL 184mm Dual Bevel Sliding Compound Mitre Saw was designed for the demand needs of the professional carpenter and remodeler. Designed to increase productivity and efficiency on the jobsite, the M18FMS184-0 combines the best in accuracy, portability and performance. Weighing in at only 11.74kg (without battery), the M18FMS184-0 is the Lightest Weight saw in its class. Dual bevel functionality provides users the most efficient and productive way make a variety of different cuts without flipping or turning the work piece. The combination of the POWERSTATE brushless motor and M18 REDLITHIUM-ION 5.0Ah battery delivers over 600 cuts per charge for all day run-time on a single charge.
-
Milwaukee M18 FUEL™ 18GA Narrow Crown Stapler
The M18 FUEL™ 18GA Narrow Crown Stapler delivers peak productivity, providing users with unmatched stapling performance without the hassle of a compressor and hose. A nitrogen air spring mechanism gives this cordless staple gun the power to consistently sink staples to the proper depth in hard materials, with the ability to adjust to drive staples in soft materials without blowing through. The combination of a POWERSTATE™ Brushless Motor and REDLINK PLUS™ Intelligence provides an unmatched fire rate with zero ramp-up time, keeping users efficient throughout the day. This battery-powered narrow crown stapler is compact and lightweight, giving users better access in tight spaces and limiting fatigue throughout the day. The M18 FUEL™ 18GA Narrow Crown Stapler delivers the pneumatic performance that professional carpenters and remodelers expect with the freedom and convenience of a cordless tool. The tool includes two work contact tips and a reversible belt hook.
-
Milwaukee M18 FUEL™ 203mm (8″) METAL CUTTING CIRCULAR SAW
$NZ1,059.00The M18 FUEL™ 203 mm (8”) Metal Cutting Circular Saw generates maximum power for fast cutting, and delivers up to 36 m (120′) of cutting corrugated metal sheeting per charge from a M18™ REDLITHIUM™-ION HIGH OUTPUT 8.0Ah battery. Designed to perform in the toughest applications, the M18 FUEL™ 203 mm (8”) Metal Cutting Circular Saw combines performance and durability with the portability of the M18™ platform. The POWERSTATE™ Brushless Motor provides 4,000 RPM and faster cutting performance than corded options. REDLINK™ PLUS Intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. With onboard chip collection, the jobsite is left free of chips, and the collected chips are easy to dispose of. When paired with a M18™ REDLITHIUM™-ION HIGH OUTPUT 8.0Ah battery (not included), the user gets 50% more power while running 50% cooler than a M18™ REDLITHIUM™-ION 5.0Ah Battery. This metal circular saw has a cut capacity of 66 mm (2-9/16”) for tackling demanding applications with a larger capacity than any previous cordless metal cutting circular saw.
-
Milwaukee M18 FUEL™ 254mm (10″) Dual Bevel Sliding Compound Mitre Saw (Tool only)
$NZ1,455.00AVAILABLE INSTORE ONLY – NOT ABLE TO BE SHIPPED
The M18 FUEL 254mm (10″) Dual Bevel Sliding Compound Mitre Saw (M18FMS254-0)was designed to meet the demanding needs of professionals. Delivering greater capacity than many corded 254mm (10″) Sliding Mitre Saws and the POWERSTATE Brushless motor delivering corded cutting performance. The M18FMS254-0 provides users a solution to replace their corded mitre saws. The M18 9.0 REDLITHIUM-ION HIGH DEMAND battery pack delivers up to 400 cuts per charge making the saw capable of lasting an entire day on site with only one pack. Premium features like an adjustable stainless steel detent plate, cam locking mitre system, easy access bevel adjustment lever and both a detent override lock and chop lock lever located on the front of the tool. The M18 FUEL mitre saw is designed for easy operation and repeatable, accurate cuts.
-
Milwaukee M18 FUEL™ 26 mm SDS Plus Rotary Hammer (Tool Only)
$NZ649.00The M18 FUEL™ 26 mm SDS Plus Rotary Hammer delivers fast drilling, hard-hitting performance and maximum control for productivity on the jobsite. Designed to achieve top performance with only moderate pressure, the rotary hammer is compatible with all M18™ REDLITHIUM™-ION batteries and is optimised for use with M18™ REDLITHIUM™-ION HIGH OUTPUT™ 6.0Ah batteries (sold separately). The POWERSTATE™ Brushless Motor delivers users 2.7 J of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK™ PLUS Intelligence tool technology ensures maximum rotary drill performance and protects the tool from overload, overheating, and over-discharge. The MILWAUKEE® M18 FUEL™ 26 mm SDS Plus Rotary Hammer includes AUTOSTOP™ Kickback Control for maximum control and enhanced safety, with the tool sensing a bind-up situation when users are drilling in rebar or hard aggregate and stopping over-rotation, without the need for the user to release the trigger, indicated by the AUTOSTOP™ Indicator LED. The Anti-Vibration System (AVS) minimises vibration for maximum comfort when in use for extended periods. A Dedicated Dust Extractor (M18FDEX) is also available (sold separately), which once connected is powered by the Rotary Hammer.
-
Milwaukee M18 FUEL™ 26 mm SDS Plus Rotary Hammer Kit
$NZ1,125.00The M18 FUEL™ 26 mm SDS Plus Rotary Hammer delivers fast drilling, hard-hitting performance and maximum control for productivity on the jobsite. Designed to achieve top performance with only moderate pressure, the rotary hammer is compatible with all M18™ REDLITHIUM™-ION batteries and is optimised for use with M18™ REDLITHIUM™-ION HIGH OUTPUT™ 6.0Ah batteries. The POWERSTATE™ Brushless Motor delivers users 2.7 J of impact energy, 1,330 RPM, and 4,800 BPM, providing speed and power in the most demanding applications. REDLINK™ PLUS Intelligence tool technology ensures maximum rotary drill performance and protects the tool from overload, overheating, and over-discharge. The MILWAUKEE™ M18 FUEL™ 26 mm SDS Plus Rotary Hammer includes AUTOSTOP™ Kickback Control for maximum control and enhanced safety, with the tool sensing a bind-up situation when users are drilling in rebar or hard aggregate and stopping over-rotation, without the need for the user to release the trigger, indicated by the AUTOSTOP™ Indicator LED. The Anti-Vibration System (AVS) minimises vibration for maximum comfort when in use for extended periods. A Dedicated Dust Extractor (M18FDEX) is also available (sold separately), which once connected is powered by the Rotary Hammer.
Also includes: (1) Side Handle with Depth Gauge, (1) Carrying Case
-
Milwaukee M18 FUEL™ 305mm Dual Bevel Sliding Compound Mitre Saw with ONE-KEY™ (Tool Only)
AVAILABLE INSTORE ONLY – NOT ABLE TO BE SHIPPED
The M18 FUEL™ 305mm Dual Bevel Sliding Compound Mitre Saw is designed to meet the demanding needs of professional carpenters and remodelers. Delivering higher capacity for a 305mm sliding mitre saw and the POWERSTATE™ Brushless motor delivering corded cutting performance. The M18FMS305-0 provides users a solution to replace their corded mitre saws. The M18™ REDLITHIUM-ION™ HIGH OUTPUT™ 12.0Ah battery pack delivers up to 330 cuts per charge making the saw capable of lasting an entire day on site with only one pack. Premium features like an adjustable stainless steel detent plate, cam locking mitre system, easy access bevel adjustment lever and both a detent override lock and chop lock lever located on the front of the tool. The M18 FUEL™ 305mm Dual Bevel Sliding Compound Mitre Saw is designed for easy operation and repeatable, accurate cuts.
-
Milwaukee M18 FUEL™ 38mm Magnetic Drill (Tool only)
The M18 FUEL 38mm Magnetic Drill drills faster, delivers the strongest magnetic hold on 6mm steel providing a safer drilling environment in this material, and drills over (40) 20mm holes per charge.The M18 FUEL 38mm Magnetic Drill delivers safer drilling on 6mm steel by providing the industry’s strongest holding force on this material. By utilising permanent magnets, the magnetic base operates without electricity; ensuring that the magnet does not deactivate if the battery is drained. Equipped with Auto-Stop lift-off detection, power to the motor is automatically cut if excess rotational motion is detected while drilling. Powered by a MILWAUKEE POWERSTATE Brushless Motor, both drills are faster than their corded counterparts, and deliver the same 38mm annular cutter capacity. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUM-ION 5.0Ah batteries provide over (40) 20mm holes in 6mm steel, while delivering the most durable pack construction on the market, and maximum recharges.
-
Milwaukee M18 FUEL™ 44mm SDS Max Rotary Hammer Kit w/ ONE-KEY™
The M18 FUEL 44mm SDS Max Rotary Hammer Kit w/ ONE-KEY is designed for the professional user, allowing ultimate power, control, safety and productivity. The POWERSTATE Brushless Motor delivers 11J of impact energy that meets and rivals that of corded competition. REDLINK PLUS intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over discharge. Power through the toughest materials with the M18 REDLITHIUM-ION HIGH OUTPUT™ 12.0Ah Battery, which delivers unmatched run-time in all applications when used with the rotary hammer drill. Our full feature hammer delivers maximum control and enhanced safety with the Electronic Clutch, which will stop rotating at 45 degrees when the tool gets bound up. This feature ensures safer work and more control while on the job. The cordless rotary hammer is compatible with ONE-KEY, wirelessly connecting to your smartphone to track and manage the tool’s performance and location. ONE-KEY integrated tool tracking gives you full visibility over how and where your tools are being used across your network of jobs and users.
-
Milwaukee M18 FUEL™ 44mm SDS Max Rotary Hammer w/ ONE-KEY™ (Tool Only)
The M18 FUEL 44mm SDS Max Rotary Hammer w/ ONE-KEY is designed for the professional user, allowing ultimate power, control, safety and productivity. The POWERSTATE Brushless Motor delivers 11J of impact energy that meets and rivals that of corded competition. REDLINK PLUS intelligence tool technology ensures maximum rotary drill performance and protects it from overload, overheating, and over discharge. Power through the toughest materials with the M18 REDLITHIUM-ION High Output 12.0Ah Battery, which delivers unmatched run-time in all applications when used with the rotary hammer drill. Our full feature hammer delivers maximum control and enhanced safety with the Electronic Clutch, which will stop rotating at 45 degrees when the tool gets bound up. This feature ensures safer work and more control while on the job. The cordless rotary hammer is compatible with ONE-KEY, wirelessly connecting to your smartphone to track and manage the tool’s performance and location. ONE-KEY integrated tool tracking gives you full visibility over how and where your tools are being used across your network of jobs and users.
-
Milwaukee M18 FUEL™ Articulating Hedge Trimmer Attachment
Our M18 FUEL QUIK-LOK Articulating Hedge Trimmer Attachment is powered by the M18 FUEL Power Head w/ QUIK-LOK and is compatible with our QUIK-LOK Attachment System. The attachment’s articulating mechanism allows for 270° rotation of the blade set, which gives you 13 operating positions and 1 storage position. The hedge trimmer attachment boasts a 508mm (20″) blade with 25mm cut capacity allowing you to clear more material in a single pass. The hedge trimmer attachment includes a tip guard to prevent damage to the blade and surrounding work area, as well as a padded grip for optimal hand placement and increased comfort. The QUIK-LOK Attachments feature protected drive shafts for increased durability against drops and storage elements. The hedge trimmer attachment also features optimised gearing to manage the cordless M18 FUEL Power Head RPM output specifically for hedge trimming applications.
Disclaimer: US model shown on application photos
-
Milwaukee M18 FUEL™ D-Handle Jigsaw (Tool Only)
$NZ479.00The M18 FUEL D-Handle Jigsaw combines power, blade speed and precision, to deliver quality cuts in a wide variety of materials and applications. Equipped with MILWAUKEE’s POWERSTATE Brushless Motor and REDLINK PLUS Intelligence, the M18 FUEL D-Handle Jigsaw provides high blade speed at 3500 strokes per minute, minimising chipping or bucking for clean controlled cuts. With the M18 REDLITHIUM-ION 5.0Ah battery, the saw is capable of cutting up to 35m of 19mm laminated particle board, delivering all-day productivity with less trips to the charger. The M18 FUEL D-Handle Jigsaw features a variable-speed two-finger trigger, toolless blade-change and bevel adjust, and an integrated LED light with on/off blower to maximise cutline visibility
-
Milwaukee M18 FUEL™ Drywall Screw Gun w/ Collated Attachment (Tool only)
$NZ465.00The M18 FUEL Drywall Screw Gun w/ Collated Attachment (M18FSGC-0) is faster than corded, features auto start functionality and delivers maximum runtime. The POWERSTATE Brushless motor spins at 4,500 RPM resulting in faster productivity. With REDLINK PLUS Intelligence, MILWAUKEE’s auto start feature automatically starts the motor on contact with drywall providing less noise between screws and longer run time. REDLITHIUM-ION 5.0Ah batteries (sold separately) power the M18FSGC-0 to deliver up to 64 sheets on one charge. The M18 FUEL Drywall Screw Gun w/ Collated Attachment delivers the balance and weight desired by professionals for all day use.
-
Milwaukee M18 FUEL™ Edger Attachment
Our M18 FUEL Edger Attachment is powered by the M18 FUEL Outdoor Power Head w/ and is compatible with our M18 FUEL Outdoor Power Equipment Attachment System. The unit features a 203mm (8″) blade and high strength guard for increased durability. The edger includes mud flaps to prevent dirt kickback as well as a skid plate to protect the gearbox from concrete contact. The adjustable wheel allows you to set optimised blade depth and tool angle for maximum control. The QUIK-LOK Attachments feature protected drive shafts for increased durability against drops and storage elements. The edger attachment also utilises optimised gearing to manage the cordless M18 FUEL Outdoor Power Head RPM output specifically for edging applications.
-
Milwaukee M18 FUEL™ Extension Attachment
Our M18 FUEL Attachment Extension is powered by the M18 FUEL Outdoor Power Head and is compatible with our M18 FUEL 10″ Pole Saw and Hedge Trimmer Attachments. The extension attachment gives you 102cm of additional length for applications requiring further reach. The attachment includes a padded grip giving you increased comfort. The extension’s QUIK-LOK Coupler has a positive locking mechanism and alignment guide allowing you to quickly make attachment changes. The QUIK-LOK Attachments feature protected drive shafts for increased durability against drops and storage elements.
-
Milwaukee M18 FUEL™ HACKZALL™ Reciprocating Saw (Tool Only)
$NZ385.00The MILWAUKEE M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed reciprocating saw. Utilising a POWERSTATE Brushless Motor and a best in class 22mm stroke length, the M18 FUEL HACKZALL cuts up faster. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS Intelligence ensures optimised performance and protects your investment from overload, overheating, and over-discharge. The M18 REDLITHIUM-ION 5.0Ah Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.
-
Milwaukee M18 FUEL™ Line Trimmer Attachment
The MILWAUKEE M18 FUEL Line Trimmer Attachment provides users with the power to clear thick brush and reaches full throttle in under 1 second when attached to the M18 FUEL Outdoor Power Head using the QUIK-LOK connection. The Easy Load Trimmer Head provides you with an easy line loading experience and the ability to load up to 7.6m of trimmer line in under 30 seconds and up to 6200RPM. The QUIK-LOK Attachments feature protected drive shafts for increased durability against drops and storage elements. The Line Trimmer Attachment also utilises optimised gearing to manage the cordless M18 FUEL Outdoor Power Head RPM output specifically for line trimming applications.The M18 FUEL Line Trimmer Attachment is part of the M18 FUEL Outdoor Power Equipment Attachment System that provides landscape maintenance professionals the ability to quickly swap out attachments on a single power head, delivering ultimate versatility and a lower cost of ownership.
-
Milwaukee M18 FUEL™ Metal Cutting Circular Saw (Tool Only)
$NZ495.00The M18 FUEL 135mm-150mm (5-3/8″ – 5-7/8″) Metal Saw delivers the fastest cuts with the longest tool life and up to 370 cuts in 19mm (¾”) EMT. This compact and lightweight metal cutting saw utilises a POWERSTATE Brushless Motor with 3,900 RPMs to deliver the fastest cutting speeds and longest tool life on the market. The metal saw also features REDLINK PLUS Intelligence, the most advanced system of cordless power tool electronics, for maximum performance and unmatched durability. The M18 REDLITHIUM-ION 5.0Ah Battery Pack delivers up to 370 cuts in 19mm (¾”) EMT which is 1 cut per minute for over 6 hours straight. The MILWAUKEE M18 FUEL 135mm-150mm (5-3/8″ – 5-7/8”) Metal Saw features a compact, low-profile design for easy handling and increased control. At only 2.2kg, this lightweight circular metal saw delivers easier overhead cuts and less user fatigue. The new saw offers an integrated hang hook that allows for easy storage while the tool is not in use. The extra-large cut guide, impact resistant window and LED light ensure superior line of site and the stainless steel shoe reduces chip build-up to prevent surface marring. The M18 FUEL Metal Saw features a 30T Carbide-Tipped Metal Saw Blade for cool, burr-free cuts through EMT, strut, threaded rod, sheet metal, angle iron and other ferrous materials. Backed by the MILWAUKEE 5-year warranty, the M18FMCS-0 comes equipped with a 30T 135mm (5-3/8″) METAL TECH Carbide-Tipped Metal Saw Blade and Blade Wrench.
-
Milwaukee M18 FUEL™ Multi-Tool (Tool only)
$NZ465.00The MILWAUKEE® M18 FUEL™ Multi-Tool generates fast cuts, the power for demolition, and low full tool vibration. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM, with an aggressive 4.2° oscillation angle to deliver fast cuts. The Multi-Tool also gives users the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, removing grout, or tackling other jobs. Vibration dampening technology delivers low full tool vibration, letting the user make cuts more comfortably, and with less fatigue. REDLINK™ PLUS Intelligence ensures optimal levels of performance, protection, and compatibility between the tool and battery. To allow users to adjust speed to suit the application, the M18 FUEL™ Multi-Tool features a 10-setting Variable Speed Dial, with an additional Auto-Load feature. Auto-Load sees the tool start slowly when making precise cuts, before automatically ramping up to the highest speed once under load. Tool-free blade change makes accessory changes quick and means no misplaced tools and less downtime on the jobsite. An integrated 180° LED light provides users maximum visibility in low-light situations.
-
Milwaukee M18 FUEL™ Outdoor Power Head w/ Line Trimmer Attachment
$NZ629.00The MILWAUKEE M18 FUEL Outdoor Power Head w/ Line Trimmer Attachment provides users with the power to clear thick brush and reaches full throttle in under 1 second using M18 FUEL technology. The unit is designed to meet the performance, durability and ergonomic needs of professional landscape maintenance and the installed M18 user. The Easy Load Trimmer Head provides the user with an easy line loading experience and the ability to load up to 7.6m of trimmer line in under 30 seconds and up to 6200RPM. The QUIK-LOK Attachments feature protected drive shafts for increased durability against drops and storage elements. The POWERSTATE Brushless Motor with 2-speed control provides the option of maximum power for demanding applications or extending run-time when full power isn’t needed. The QUIK-LOK Coupler is compatible with the other attachments within the M18 FUEL™ Outdoor Power Equipment Attachment System, providing landscape maintenance professionals the ability to quickly swap out attachments on a single power head, delivering ultimate versatility and a lower cost of ownership. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge.
-
Milwaukee M18 FUEL™ PACKOUT™ Wet/Dry Vacuum L Class (Tool only)
$NZ540.00The M18 FUEL™ PACKOUT™ Wet/Dry Vacuum L Class provides powerful suction and low noise, while being fully compatible with the Milwaukee PACKOUT™ Modular Storage System. A POWERSTATE™ Brushless motor delivers maximum suction for powerful performance to easily clean common wet and dry jobsite debris. PACKOUT™ compatibility gives the wet/dry vacuum unmatched mobility, saving the user time spent hauling tools on and off the jobsite. Bringing PACKOUT™ portability to jobsite clean up, the vacuum can be used either integrated within the PACKOUT™ stack or when removed from the stack. At just 87 dB(A), the M18 FUEL™ PACKOUT™ vacuum is suitable for use in occupied spaces. With 9.5 Litre dry capacity, the vacuum also includes a certified HEPA filter for optimal dust and microparticle collection. Part of the M18™ System, when powered by an M18™ REDLITHIUM™-ION HIGH OUTPUT 8.0Ah Battery Pack (sold separately), the vacuum can deliver up to 30 minutes of runtime in high mode and over 50 minutes in low mode.
-
Milwaukee M18 FUEL™ Pole Saw Attachment
Designed to meet the needs of landscape maintenance professionals, Our M18 FUEL Pole Saw Attachment gives you the maximum power to cut hardwood branches. When attached to the M18 FUEL Outdoor Power Head and powered by M18 REDLITHIUM-ION HD9.0 Battery, the system reaches full throttle in under 1 second, and delivers up to 150 cuts per charge. The QUIK-LOK Attachments feature protected drive shafts for increased durability against drops and storage elements. The M18 FUEL Pole Saw Attachment is part of the M18 FUEL Outdoor Power Equipment Attachment System that provides landscape maintenance professionals the ability to quickly swap out attachments on a single power head, delivering ultimate versatility and a lower cost of ownership.
-
Milwaukee M18 FUEL™ SUPER HAWG™ Right Angle Drill (Tool only)
$NZ675.00Our M18 FUEL™ SUPER HAWG™ 13mm Right Angle Drill delivers the next generation of ground-breaking performance with the power and speed to replace corded right angle drills. The cordless right angle drill is designed from the ground up to generate corded power and deliver you with up to 100x 65mm holes through 150mm beams per battery charge on our M18™ REDLITHIUM™ HIGH OUTPUT™ 6.0AH battery (not included). The MILWAUKEE® SUPER HAWG™ features our POWERSTATE™ Brushless Motor, optimized REDLINK™ PLUS electronics, and is powered by our REDLITHIUM™ HIGH OUTPUT™ Batteries. The drill’s all-metal 13mm keyed chuck provides you with ultimate durability and long tool life. An all-metal side handle and LED light ensures you have optimal control and visibility while operating your tool. The M18 FUEL™ SUPER HAWG™ delivers the performance and run-time to complete single-family home rough-ins or the ability to rough-in multiple multi-family units on a single charge.
-
Milwaukee M18 FUEL™ SUPER SAWZALL™ Reciprocating Saw (Tool Only)
$NZ649.00The SUPER SAWZALL Reciprocating Saw generates corded power, faster cuts; and delivers Up To 150 Cuts per charge. Designed to perform in the toughest applications, the M18 FUEL SUPER SAWZALL combines MILWAUKEE’s legendary performance and durability with the portability of the M18 platform. The POWERSTATE Brushless Motor Provides 3,000 SPM and higher speeds under load for corded cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM-ION High Output 12.0Ah battery delivers unmatched run-time in all applications. The 32mm stroke length removes more material with each stroke and On/Off Orbital action provides aggressive cuts in wood and smooth cuts in metal. Variable speed trigger and 5-speed dial provide maximum speed control for any application. The QUIK-LOK blade clamp allows for tool less blade changes and a rafter hook provides a convenient way to store the saw between cuts.
-
Milwaukee M18 FUEL™ SURGE™ 1/4″ Hex Hydraulic Driver (Tool only)
$NZ465.00The M18 FUEL SURGE 1/4″ Hex Hydraulic Driver is the quietest cordless fastening solution on the market. With MILWAUKEE’s new FLUID-DRIVE Hydraulic Powertrain, users will experience quieter operation, less vibration for smoother operation, and faster driving speeds compared to standard impacts. The POWERSTATE Brushless Motor delivers up to 0-3,000 RPM with constant power output to drive screws faster. REDLINK PLUS Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM-ION Batteries (sold separately). The 4-Mode DRIVE CONTROL provides greater control over output speed and power for greater versatility. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
-
MILWAUKEE M18AL-0 LED AREA LIGHT (TOOL ONLY)
$NZ255.00The MILWAUKEE M18 LED Area Light delivers up to 30% brighter light output than corded 250W halogen lights. Designed to illuminate large workspaces on the job site, the cordless flood light uses 8 high-quality LEDs to provide 1,100 lumens and up to 1,300 lux. It’s powered by the M18 REDLITHIUM-ION battery for up to 8 hours of runtime on a single charge. With its roll cage design and impact-resistant, replaceable lens, it stands up to the toughest working conditions.This compact flood light features an octagonal shape so the light may be used at multiple angles. The versatile hanger provides hands-free use in a variety of applications. The light carries a limited lifetime LED warranty. TRUEVIEW High Definition Lighting utilises the most advanced lighting technology to deliver true representation of colors, optimised color temperature, and even beam patterns all designed to improve productivity and safety.
-
MILWAUKEE M18ARFHP0 M18™ High Performance Area Fan (Tool Only)
The M18™ High Performance Area Fan delivers corded performance anywhere on the job site, providing air circulation up to 15.2 metres and up to 21.7 km/h. The 457mm (18″) blade and brushless motor quickly propels air, allowing for fast and efficient cooling, drying, or ventilation. The reinforced metal base and shroud design withstands demanding job site environments and delivers impact, water, and dust resistance. This lightweight, mobile fan can adapt to any location with 360 degrees of vertical head rotation and 5 hours of use on high using an M18HB12. The integrated AC plug offers the versatility to plug in a standard extension cord for extended runtime. For optimised storage and transportation, this fan has an interlocking stackable design for maximum convenience and coverage.
-
MILWAUKEE M18BBL-0 Compact Blower (Tool only)
$NZ245.00The M18™ Compact Blower delivers fast jobsite cleanup for maximum productivity. The M18BBL offers optimal power to size ratio. The M18™ Compact Blower has power control that includes a 3-speed electronic switch, lock-on and a variable speed trigger which allows for versatile clearing power. The Compact Blower moves air at 257 kph and 2.8 m3/min to keep users productive. Featuring a shock-absorbing polymer body and a crush-resistant nozzle the M18™ Compact Blower delivers jobsite durability. Included is a 230 mm nozzle extension to clear dust and debris easily from the ground, overhead or tight spaces. The M18BBL also comes with a universal inflator/deflator attachment suitable for most inflatable products, and the blower works with all M18™ REDLITHIUM™-ION Batteries.
-
MILWAUKEE M18BCT-0 Cut Out Tool (Tool only)
$NZ225.00The M18 Cut Out Tool utilises a 4-Pole motor to deliver faster cuts than other tools in the market. The REDLINK Intelligence provides overload protection to defend against abusive situations. The REDLITHIUM-ION 3.0Ah battery (not included) provides up to 120 cuts per charge. The best in class ergonomics allow for increased comfort during all day work.
-
MILWAUKEE M18BHG-0 COMPACT HEAT GUN (TOOL ONLY)
$NZ265.00The M18 Compact Heat Gun performs applications quickly by reaching operational temperature in less than 7 seconds. Being the most compact electric heat gun among market leaders, it can go places where corded heat guns can’t. The guarded nozzle provides increased protection for work surfaces and the ladder hook allows users to easily hang the tool between applications. Powered by REDLITHIUM-ION battery technology, it is able to heat over 40 connections on a single 5.0Ah battery, anywhere, anytime without the hassle of cords. The M18 Compact Heat Gun features REDLINK PLUS Intelligence with a temperature management system to provide maximum life.
-
MILWAUKEE M18BI0 INFLATOR (TOOL ONLY)
$NZ429.00The Milwaukee M18™ Inflator delivers fast, accurate, easy inflation with the portability to take it anywhere. Optimised for passenger, light truck and other medium duty tyres, the M18™ Inflator has the capability to complete demanding applications like car, light truck, and compact equipment tyres whilst providing ultimate power and efficiency. Rated to deliver over 150PSI, the high efficiency motor and pump tops-off car or light truck tires in under 1 minute. The TRUEFILL technology delivers highly accurate pressure, protects from overfill, and automatically senses speed of fill to deliver precise shut-off at the desired PSI.
-
Milwaukee M18BLCS66-0 Brushless 184mm Circular Saw (Tool Only)
$NZ585.00M18 Brushless 184mm Circular Saw delivers maximum power in a brushless motor while providing more run-time. The MILWAUKEE built motor and REDLINK PLUS electronics provide more efficient power delivery, more power and fewer trips to the charger. With 5,000 RPM the M18BLCS66-0 provides smooth cutting, and at only 3.3kg, it is lighter than most corded saws. The 184mm Brushless Circular Saw also features an integrated rafter hook, magnesium guards, an aluminium shoe and LED light.
-
MILWAUKEE M18BLTRC-0 Brushless Threaded Rod Cutter (Tool Only)
$NZ1,095.00Our M18 Brushless Threaded Rod Cutter is MILWAUKEE’s dedicated solution for cutting the most common threaded rod sizes (M6, M10, M8 and M12) on the jobsite. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18 REDLITHIUM™ 2.0Ah Battery. The four-sided cutting dies allow you to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The rod cutter has the clearest line of sight and delivers clean, burr-free cuts enabling you to thread a nut on by hand without having to file down the ends. The rod cutter features optimised blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing you to perform fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centred grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides you with a stable surface for benchtop cuts.
-
Milwaukee M18BMS-0 Cordless 18 Gauge Single Cut Shear (Tool only)
$NZ849.00With the introduction of the new M18 Cordless Shears, MILWAUKEE has the most innovative and largest cordless shear selection on the market. By redesigning the body, we provide an inline wrist design that maximises control during use. Also adding the industry’s only Tool-Free 360° rotating head, our new shears can be used where hand snips have been needed to finish the cut. These innovations brought to each of the 3 new MILWAUKEE Cordless Shears are changing the way tradesmen work on the job site today.
-
Milwaukee M18BOS125-0 Random Orbital Sander (Tool Only)
$NZ330.00The M18 125mm Random Orbital Sander delivers corded power with 12,000 Max OPM output. The 7,000-12,000 OPM variable speed dial allows the user more control over the output of the tool to match the orbit speed for the application. The tool’s powerful motor allows the user to remove more material per battery charge. The M18 Random Orbital Sander powered by REDLITHIUM-ION battery technology delivers up to 35 minutes of run-time on a M18 3.0Ah Battery Pack.
-
Milwaukee M18BP-0 82mm Planer (Tool only)
$NZ515.00The M18 82mm Planer delivers unmatched depth control & powerful stock removal for quick and precise material removal on soft or hard woods. The Planer’s powerful motor allows the user to remove up to 2mm in a single pass for increased productivity. The depth adjustment dial’s 20 locking positions allows for multiple depth settings and precise depth control. In addition the depth adjustment dial does not rotate past the 0 or 2mm setting which allows users to quickly identify at what depth they are cutting without needing to re-zero the dial. The M18 Planer also provides up to a 10.7mm rabbet cut capacity offering users more depth of cut when making shiplap joints. A left or right chip ejection feature allows users to aim shavings away from their eyes or finished surfaces; increasing safety, productivity, and accuracy.
-
MILWAUKEE M18BQSS0 1/4 SHEET SANDER (TOOL ONLY)
$NZ265.00Designed for the professional carpenter, remodeler, and general contractor; our M18™ 1/4 Sheet Sander is optimised for performance and productivity on the jobsite. This M18™ 1/4 Sheet Sander offers unmatched power at 13K Max OPM and class-leading dust collection to replace your corded unit. The low vibration and ergonomics of the tool deliver enhanced comfort and user control to reduce fatigue. The two-step clamp and hook & loop system allows for quick and easy sandpaper changes. The variable speed dial offers adjustment from 13K to 11K OPM for precise removal throughout a wide variety of materials. Our dust collection system paired with our durable dust bag or universal hose adapter reduces clean-up time and provides a cleaner work environment.
-
Milwaukee M18CHS355-0 FUEL™ 355 mm (14″) Abrasive Chop Saw (Tool Only)
$NZ995.00The M18 FUEL™ 355 mm (14″) Abrasive Chop Saw offers a portable solution while generating unmatched cordless cutting speed. The M18 FUEL™ 355 mm (14″) Abrasive Chop Saw utilises a POWERSTATE™ Brushless Motor, providing 4,000 RPM for consistent power and cut speed. REDLINK PLUS™ Intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. When paired with the M18™ REDLITHIUM™-ION High Output 12.0Ah Battery Pack (not included), the abrasive chop saw provides up to 200 cuts per charge in 3-5/8″ (92 mm) 20-gauge steel stud. The RAPIDSTOP™ Blade Brake stops the blade within 3 seconds of trigger release. This portable cop saw offers a tool-free blade change and tool-free fence adjustment, making blade changes and fence movements a seamless process. An overload indicator light coaches the user into the optimal cutting speed.
-
MILWAUKEE M18CHT-0 FUEL™ Hedge Trimmer (Tool Only)
$NZ565.00The M18 FUEL™ Hedge Trimmer has the power to cut 19 mm branches, cuts faster, and provides up to 2 hours of run-time on a 8.0Ah battery. Designed to meet landscape maintenance professional needs, the handle placement and weight distribution provide the best combination of balance and control. The trimmer features a slider-crank mechanism and all-metal gear case providing durability and longevity. The 609mm blade trims more material in a single pass, increasing reach and productivity. The blade tip guard prevents damage to the property and the blades.
-
MILWAUKEE M18CHT24B0 FUEL™ 24″ (610mm) Hedge Trimmer (Tool Only)
$NZ515.00The M18 FUEL™ 24″ (610mm) Hedge Trimmer has the power to cut 20mm branches, with a fast cut speed of 3,400 SPM. Providing up to 90 minutes of runtime when used with a M18™ REDLITHIUM™ HIGH OUTPUT™ 6.0Ah battery (sold separately), the Hedge Trimmer is designed to meet the needs of landscape maintenance professionals. The bail handle placement and weight distribution provide the ultimate combination of balance and control. The Hedge Trimmer features a slider-crank mechanism and all-metal gear case for durability and longevity. The 610mm dual blades trims more material in a single pass, increasing user reach and productivity, with fast, clean cuts. A blade tip guard is fitted to the tool and prevents damage to property and the blades.
-
MILWAUKEE M18CLT-0 FUEL™ Line Trimmer (Tool only)
The M18 FUEL™ Line Trimmer has the power to clear thick brush, reaches full throttle in under 1 second, and provides up to 1 hour of run-time per charge on an M18™ REDLITHIUM-ION HIGH OUTPUT™ 8.0Ah Battery Pack. Designed to meet landscape maintenance professional needs, the motor is positioned in the rear of the trimmer to provide the best combination of power, balance, and manoeuvrability. The trimmer features high and low speed settings with a variable speed trigger. High provides the power to clear thick brush, and low maximizes run-time while having plenty of power for grass trimming. The 406mm cutting swath trims more grass in a single pass, increasing productivity. The full sized head holds more line and has a metal reinforced bump knob for longer life. The M18 FUEL™ Line Trimmer is fully compatible with 100+ solutions on the M18™ system.
-
MILWAUKEE M18COS230-0 FUEL™ 230 mm (9″) Cut-Off Saw w/ ONE-KEY™ (Tool only)
$NZ1,125.00The M18 FUEL™ 230 mm (9″) Cut-Off Saw w/ ONE-KEY™ is an extremely versatile solution for cutting a large variety of materials. The cordless cut off saw runs on our MILWAUKEE® M18™ REDLITHIUM™-ION batteries instead of using petrol like most traditional cut off saws. The cut off saw delivers the power to cut reinforced concrete as well as a large variety of other metal and masonry materials. It delivers this performance in a compact and ergonomic design resulting in minimum fatigue for the user. By utilising an M18™ REDLITHIUM™-ION HIGH OUTPUT HD12.0 Battery (not included), the saw also ensures the user will experience no petrol headaches. The concrete cutting saw produces no fumes so it can be used indoors. It also starts up instantly, eliminates the need to mix petrol and oil, and there is no petrol engine maintenance. The M18 FUEL™ 230 mm (9″) Cut-Off Saw is ONE-KEY™ capable, allowing users to track and manage the tool.
-
Milwaukee M18CRAD2-0 FUEL™ HOLE HAWG™ Right Angle Drill
$NZ675.00The M18 FUEL™ HOLE HAWG™ Right Angle Drill from MILWAUKEE™ drills faster than the original HOLE HAWG™, delivers over 220 holes per charge on a M18HB6, and is lighter weight than its corded predecessor. Optimised for many applications, the M18 FUEL™ HOLE HAWG™ Right Angle Drill delivers game-changing productivity for professionals drilling with augers up to 32mm and self-feed bits up to 50mm. The POWERSTATE™ brushless motor delivers better performance than corded drills, especially under heavy load. REDLINK PLUS™ Intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. The REDLITHIUM™-ION battery packs provide maximum run time and recharges than standard lithium, operate down to -18C. and have a battery fuel gauge to display the remaining charge.
-
MILWAUKEE M18CSX2-0 M18 FUEL™ SAWZALL™ RECIPROCATING SAW (TOOL ONLY)
$NZ639.00The M18 FUEL™ SAWZALL™ Reciprocating Saw is the next generation of legendary performance and durability, designed for the toughest applications on the job site. The M18 FUEL™ SAWZALL™ delivers fast cuts, as it leverages a POWERSTATE™ Brushless Motor to provide users with 3,000 SPM and 32 mm (1-1/4″) stroke length for fast material removal. REDLINK™ PLUS Intelligence ensures maximum performance under stress, as well as protection from overloading, overheating, and over-discharging. The M18™ REDLITHIUM™-ION 5.0Ah Battery Pack (not included) delivers users runtime and provides more work per charge and more work over the life of the battery pack. The M18 FUEL™ SAWZALL™ Reciprocating Saw is designed to perform in demanding applications and is Milwaukee’s most durable cordless reciprocating saw yet. A tool-free, wear-resistant blade change reduces downtime on the job, and an anti-corrosion blade clamp and metal reinforced battery rails provide long component life, standing up to tough jobsite conditions. The M18 FUEL™ SAWZALL™ Reciprocating Saw weighs less than the previous generation and features an adjustable shoe, integrated LED light, and a hanging hook for convenient storage on the job.
-
MILWAUKEE M18FAC-0 FUEL™ Air Compressor (Tool Only)
$NZ979.00The M18 FUEL™ Air Compressor is designed for the professional carpenter and remodeler. The air compressor operates at a whisper quiet 68dB(A), allowing the tool to be used as close to the task being performed as necessary, without safety risks such as added hoses and difficult communication. The M18 FUEL™ Air Compressor has been designed to be high performing while reducing the noise professionals deal with on jobsites. The low profile and stackable design allows for maximum portability, with easy transportation on, around, and back off the jobsite via two carry handles. The compressor can be easily carried at a lightweight 14.2 kg, or the unit can be placed atop a PACKOUT™ stack, with the compressors feet being positioned in a way that allows the unit to be stable when being moved around site. When paired with an M18™ REDLITHIUM™-ION HIGH OUTPUT™ 12.0Ah Battery (sold separately), it has runtime professionals need to stay productive, giving users up to 1,600 25.4 mm (1″) 18ga nails per charge, without the hassle of power leads (1,000 nails using an M18™ REDLITHIUM™-ION HIGH OUTPUT™ 8.0Ah Battery, or 600 nails using an M18™ REDLITHIUM™-ION 5.0Ah Battery). The M18 FUEL™ Air Compressor is compatible with all MILWAUKEE® M18™ REDLITHIUM™-ION batteries making it easy to swap packs and keep running to finish the job at hand.
-
MILWAUKEE M18FAGV125XPDB-0 M18 FUEL™ 125mm (5″) Variable Speed Braking Angle Grinder with Deadman Paddle Switch (Tool Only)
$NZ499.00The M18 FUEL™ 125mm (5″) Variable Speed Braking Angle Grinder with Deadman Paddle Switch brings versatility of variable speed to the M18 FUEL™ angle grinder range. The POWERSTATE™ Brushless Motor delivers a range of 3,500 to 8,500 RMP for use with a variety of materials and applications. The RAPID STOP™ brake stops the disc in under 2 seconds. REDLINK™ PLUS Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL™ 125mm (5″) Variable Speed Braking Angle Grinder with Deadman Paddle Switch includes an electronic clutch for kickback protection, as well as overload protection to maximise motor life. With tool-free accessory and guard adjustments, users will experience fast accessory changes, and less downtime, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL™ 125mm (5″) Variable Speed Braking Angle Grinder with Deadman Paddle Switch takes cordless grinders to the next level.
-
MILWAUKEE M18FBC0 FUEL™ Brushcutter/Line Trimmer with Double Shoulder Harness (Tool Only)
$NZ859.00The M18 FUEL™ Brushcutter/Line Trimmer with Double Shoulder Harness has the power to clear thick brush and reach full throttle in under 1 second, while minimising fatigue during extended cutting. The POWERSTATE™ Brushless Motor delivers up to 6,200 RPM and has the power to maintain speed in demanding applications. The motor is positioned in the rear of the brushcutter, to provide the best combination of power, balance, and manoeuvrability. REDLINK PLUS™ Intelligence maximises performance while protecting from overload, overheating, and over discharge. The advanced electronic package delivers an instant throttle response, high and low speeds, whilst a variable speed trigger provides ultimate control over the power range. The M18 FUEL™ Brushcutter/Line Trimmer includes an Easy Load Trimmer Head (49162748), 4-Tooth Brushcutter Blade (49162757), and a Double Shoulder Harness (MILDSHBC). The Easy Load Trimmer Head provides an easy line loading experience with the ability to load up to 7.6 m of trimmer line in under 30 seconds, and while coupled with the Line Trimmer guard, provides users with an adjustable 356 mm to 406 mm cutting swath. The Brushcutter Blade utilises a 230 mm (9″), 4-tooth design, to take on more demanding applications and includes a separate guard design, optimised for the best material containment. The comfortable Dual Shoulder Harness provides less fatigue for users in extended cutting.
-
MILWAUKEE M18FBJS-0 FUEL™ Barrel Grip Jigsaw (Tool Only)
$NZ449.00The M18 FUEL Barrel Grip Jigsaw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18 FUEL Barrel Grip Jigsaw leverages the POWERSTATE Brushless Motor and REDLINK PLUS Intelligence to provide higher blade speed than corded jigsaws at 3500 strokes per minute for clean controlled cuts with minimised chipping or bucking. Leveraging the M18 REDLITHIUM-ION 5.0Ah battery the M18 FUEL Barrel Grip Jigsaw provides up to 32m of cutting in 19mm laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with detents at 0°; 15°; 30°; and 45° as well as an LED light and on/off blower to keep the cut line visible while cutting
-
MILWAUKEE M18FBLG30 FUEL™ Blower (Tool Only)
$NZ549.00The M18 FUEL™ Blower is designed to meet the needs of the landscape maintenance professional for quick, routine cleanups. The M18 FUEL™ Blower delivers a maximum air volume of 14.2 m3/min (500 CFM), with a maximum air speed of 193 KPH, providing users high constant power levels and reaching full throttle in under one second. The blower also offers a low noise level of 90 dB(A), allowing users to work comfortably and comply with blower noise regulations. The lightweight, balanced design and ambidextrous variable speed sliding lock on switch provides the user with both control and the power to clear debris from 4.5 metres. Also included are both a tapered and a flat nozzle attachment, providing the ability to optimise airflow for different applications after connection to the blower tube.
-
MILWAUKEE M18FBS1250 M18 FUEL™ 125mm Deep Cut Band Saw (Tool Only)
$NZ979.00The M18 FUEL™ 125mm kg, Deep Cut Band Saw delivers user-demanded performance with the ability to cut fast. Weighing only 4.8kg, the M18FBS1250 reduced weight means less user fatigue and easier adjustments for overhead cutting. Milwaukee’s cordless Deep Cut Band Saw provides users with up to 78 cuts per charge in 41 mm uni-strut with an M18 REDLITHIUM™ 5.0Ah Battery, eliminating multiple trips to the charger onsite. The POWERSTATE™ brushless motor delivers maximum power and 167.6 SMPM to remove material faster and increase productivity. With Variable Speed Mode Select, and a feathering trigger to allow for control over the speed of cut on thicker metals. A tool-free adjustable shoe, to help guide the user through a straighter cut, and an LED Work light to illuminate their application means faster more accurate cutting with minimised adjustments. the M18 FUEL™ 125mm Deep Cut Band Saw is equipped with features to enhance the control of users cuts while maximising the cutting experience safely throughout the day.
-
MILWAUKEE M18FCHS-0 FUEL™ 16″ (406 mm) Chainsaw
$NZ795.00The MILWAUKEE M18 FUEL™ 16″ (406 mm) Chainsaw delivers the power for faster cutting to cut hardwoods, and delivers up to 150 cuts per charge. The unit is designed to meet the performance, durability and ergonomic needs of professional landscape maintenance, power utility, and the installed M18 user. The POWERSTATE Brushless Motor maintains speed under heavy loads without bogging down. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. M18 FUEL technology allows the unit to reach full throttle in under 1 second providing ultimate control and productivity.
-
MILWAUKEE M18FCS66-0 FUEL™ 184MM CIRCULAR SAW (TOOL ONLY)
Original price was: $NZ649.00.$NZ629.00Current price is: $NZ629.00.Designed for the carpenter, remodeler and general contractor, the M18 FUEL 184mm Circular Saw from MILWAUKEE generates corded power, cuts faster and gives users up to 750 cuts per charge. The POWERSTATE Brushless Motor provides 5,800 RPM and higher speeds under load for corded cutting performance. REDLINK PLUS intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18 REDLITHIUM-ION HIGH OUTPUT 12.0 battery delivers unmatched run-time in all applications. All magnesium guards and shoe delivers extreme durability for jobsite conditions. A built-in rafter hook offers quick and easy storage and an electric brake stops the blade quickly after cuts are complete for maximum productivity.
-
MILWAUKEE M18FCS66G30 FUEL™ 184mm Circular Saw (Tool Only)
$NZ699.00Specifications
Platform M18 FUEL™Voltage 18VNo Load RPM 6000LED Light YesMaximum Bevel Capacity 50°Max Cutting Depth Depth of cut at 90°: 0 to 64mm | Depth of cut at 45°: 0 to 50mmArbor Size 20mmDimensions 352 x 213 x 218mmWeight 4.2kgWarranty 5 YearsCut Line Blower YesBlade Sizes 184mm (7-1/4″) -
MILWAUKEE M18FHIW2P120 FUEL™ 1/2″ High Torque Impact Wrench with Pin Detent (Tool Only)
$NZ859.00The M18 FUEL™ ½” High Torque Impact Wrench w/ Pin Detent provides maximum power density and greater access in tight spaces, maximising productivity through faster bolt removal speeds. The POWERSTATE™ Brushless Motor delivers up to 1,220Nm of Fastening Torque and 1,490Nm of Nut-Busting Torque when paired with the M18™ REDLITHIUM™ FORGE™ 6.0Ah Battery, while the compact size at 185.4mm in length gives users greater access in tight spaces. The new battery isolation system provides a secure battery connection and controls vibration transmitted to the pack. Tri-LEDs surround the anvil to deliver brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers greater precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, AUTO SHUT-OFF™ control applies no more than 68Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode that delivers users full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops.
-
MILWAUKEE M18FID30 M18 FUEL™ 1/4″ HEX IMPACT DRIVER (TOOL ONLY)
$NZ449.00The M18 FUEL™ 1/4″ Hex Impact Driver features the POWERSTATE™ Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.
-
MILWAUKEE M18FMTIW2F12-0 1/2″ Mid-Torque Impact Wrench with Friction Ring (Tool Only)
$NZ649.00The M18 FUEL™ 1/2″ Mid-Torque Impact Wrench with Friction Ring delivers access in tight spaces, up to 881 Nm of nut-busting torque, and maximum power to weight ratio. This battery-powered impact wrench weighs only 1.58 kg, making it extremely versatile, capable of performing a wide variety of applications. A POWERSTATE™ Brushless Motor provides the power needed to quickly perform many tasks, such as removing large bolts or lug nuts. The MILWAUKEE® 1/2″ Mid-Torque Impact Wrench with Friction Ring is only 152 mm in length, providing users access to stubborn fasteners where larger impact wrenches cannot fit without needing to disassemble components to reach bolts. Tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 48 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.
-
MILWAUKEE M18FPD30 M18 FUEL™ 13MM HAMMER DRILL/DRIVER (TOOL ONLY)
$NZ555.00The M18 FUEL™ 13mm Hammer Drill Driver delivers the capability to drill large holes at high speed into the densest materials. The cordless drill is a compact design and solution, featuring AutoStop™ Control Mode for Enhanced Safety. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16″ Self-Feed holes in dense woods for increased productivity. At only 175mm in length, it provides maximum access and maneuverability in tight spaces. The AutoStop™ Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up. The REDLINK PLUS™ intelligence ensures maximum performance and protection from overloads, heating, and over-discharge whilst the all metal ratcheting chuck provides increased grip strength, durability, and corrosion resistance.
-
MILWAUKEE M18FPP2A3502C FUEL™ 2 PIECE POWER PACK 2A3
Original price was: $NZ1,125.00.$NZ995.00Current price is: $NZ995.00.WHAT’S INCLUDED
M18 FUEL™ 13mm Hammer Drill/Driver (Tool Only)
M18 FUEL™ 1/4″ Hex Impact Driver (Tool Only)
(2)x M18™ REDLITHIUM™-ION 5.0Ah Battery + M12™ REDLITHIUM™-ION 2.0Ah Compact Battery
M12™ & M18™ Rapid Charger
-
MILWAUKEE M18FPS55-0 FUEL™ 165MM TRACK SAW (TOOL ONLY)
$NZ875.00Designed for the professional carpenter and remodeler, the M18 FUEL™ 165mm Track Saw from Milwaukee® delivers the Power to rip solid hardwoods, over 90% dust collection efficiency while providing the portability and precision users demand from a Track Saw. The Powerstate™ Brushless motor provides 5,600 RPM for finish quality and clean cuts. REDLINK PLUS™ intelligence ensures maximum performance and protection from overload, overheating, and over-discharge. The saw features a variable speed dial allowing for setting the speed of your application. The smooth, pivoting plunge motion allows for precision plunge cuts with an accurate depth of cut.
-
MILWAUKEE M18FTCHS140 14″ TOP HANDLE CHAINSAW (TOOL ONLY)
$NZ780.00The M18 FUEL™ 14″ (356mm) Top Handle Chainsaw provides users with fast cut speeds and the power to cut hardwoods, while eliminating the headaches associated with petrol engines. The chainsaw is designed to meet the performance, durability, and ergonomic needs of the professional arborist, power utility linesmen, and landscape maintenance professional. M18 FUEL™ technology allows the saw to reach full throttle in under 1 second, providing the user ultimate control and fast application speed. The POWERSTATE™ Brushless Motor maintains speed under heavy loads without bogging down. The chainsaw eliminates the headaches associated with petrol engines, such as pull starts, high noise levels, emissions, and regular engine maintenance. The REDLINK™ PLUS Intelligence enables full-circle communication between the tool and battery, providing the user with maximum levels of performance, protection, and productivity. Optimised for REDLITHIUM™-ION HIGH OUTPUT™ batteries, when paired with an 8.0Ah battery (sold separately), the saw delivers up to 150 cuts per charge in 4″ x 4″ (102mm) cedar. The saw has a professionally demanded feature set including an easy access chain tensioner, automatic oiler, metal bucking spikes, onboard scrench storage, lanyard loop, and climbing scabbard.
-
MILWAUKEE M18FTR-0 FUEL™ Laminate Trimmer
$NZ489.00Our M18 FUEL™ Laminate Trimmer combines power, speed and accurate depth adjustments to deliver clean accurate cuts in a variety of materials and applications. The Laminate Trimmer leverages our POWERSTATE Brushless Motor and REDLINK™ PLUS electronics. This delivers the power of corded 1.25 horsepower laminate trimmers and best-in-class 31,000 RPM providing you with power and speed for clean, quality cuts in hard materials. With our M18™ REDLITHIUM™-ION 5.0Ah battery, the cordless laminate trimmer cuts up to 76m of 9.5mm roundovers in red-oak, providing you with all-day run time with fewer trips to the charger. The handheld laminate trimmer is equipped with a micro-adjust dial and macro-adjust button, providing you with fast and accurate depth adjustments for highly accurate work. A variable-speed dial with speed from 10,000 to 31,000 RPM gives you control in all applications. The Laminate Trimmer also features a sturdy 101mm sub-base plate providing you with stability, and dual-LED lights illuminate your work surface. The M18 FUEL™ Laminate Trimmer is compatible with a plunge base and an offset base (sold separately).
-
MILWAUKEE M18HOAL-0 M18™ HIGH PERFORMANCE AREA LIGHT (TOOL ONLY)
$NZ465.00The M18™ High Performance Area Light provides users with 4,000 lumens of TRUEVIEW™ High Definition Output designed to fill large areas with light. The area light features three modes and up to 12 hours of run-time when paired with an M18™ REDLITHIUM™-ION 5.0Ah Battery Pack (sold separately). The portable light features an AC inlet, giving the user the option to plug in an extension cord for all day runtime. The light head rotates 120° to direct light in multiple orientations. Its light weight, compact footprint, and integrated handle allows the user to easily transport or store it in bags, carts, and job boxes. The light includes integrated keyholes on its base for hanging on overhead surfaces. The area light features an impact-resistant design, making it able to withstand harsh jobsite conditions.
-
MILWAUKEE M18LL-0 LED LANTERN/FLOOD LIGHT (TOOL ONLY)
The M18 LED Lantern/Flood Light features a 180º-360º adjustable beam design to allow users to select between area lighting and task lighting for maximum versatility. With over 700 Lumens, the new unit delivers unmatched light output to illuminate large work areas. As an added value to the user, the light also includes a high power 2.1A USB port to charge tablets, smart phones, mp3 players and other electronic devices. With a rugged design and impact resistant lense, the new light is built to withstand abusive job site conditions. TRUEVIEW High Definition Lighting utilises the most advanced lighting technology to deliver true representation of colors, optimised color temperature, and even beam patterns all designed to improve productivity and safety.
-
MILWAUKEE M18ONEFHIWF1-0 FUEL™ ONE-KEY™ 1″ High Torque Impact Wrench with Friction Ring (Tool Only)
$NZ1,165.00Our M18 FUEL 1″ High Torque Impact Wrench w/ ONE-KEY is the world’s first cordless 1” High Torque Impact Wrench. The POWERSTATE Brushless Motor delivers up to 2440Nm of nut-busting torque and 2033Nm of fastening torque, making this the most powerful cordless impact wrench and enabling you to complete the most demanding applications. At only 5.9kg with an M18HB8 battery, the tool is up to 3.1kg lighter than corded units, providing you with less fatigue while making overhead applications easier to complete on the job site. The battery-powered impact wrench provides you with cordless convenience and eliminates your need for compressors, generators, cords, and hoses. This reduces your cost of ownership by lowering energy costs and eliminating routine maintenance on compressors and generators. With no cord or hose, you have greater portability and the ability to complete applications you were not able to do with a corded or pneumatic unit. The REDLINK™ PLUS Intelligence ensures you achieve maximum performance and protects your high torque impact wrench against overloads, over-heating, and over-discharge. M18 REDLITHIUM™ battery packs are compatible with all M18 tools, providing you with more work per charge and more work over the life of the pack. The 4-Mode DRIVE CONTROL provides you with greater control over the output speed and power of the powerful high torque impact wrench . The ONE-KEY capabilities provide you with the ability to Customise, Track and Manage the impact wrench. ONE-KEY technology also gives you the ability to set a repeatable torque output for maximum control.
-
MILWAUKEE M18ONEFHIWF34-0 18V FUEL™ ONE-KEY™ 3/4″ High Torque Impact Wrench with Friction Ring (Tool Only)
$NZ835.00The M18 FUEL w/ ONE-KEY High Torque 3/4” Impact Wrench with Friction Ring provides the maximum power, minimum length, and maximum repeatability! The POWERSTATE Brushless motor delivers up to 1627Nm of fastening torque and 2034Nm of nut-busting torque, providing users a cordless solution that will eliminate the need for corded Impact Wrenches. The industry’s most compact cordless High Torque Impact wrench at 218mm in length, this tool allows for more access in tight spaces. REDLINK PLUS intelligence prevents damage to the tool and battery due to overloading or overheating. REDLITHIUM™ batteries deliver more work per charge and more work over the life of the battery.Compatible with ONE-KEY, this is the industry’s first High Torque Impact Wrench that wirelessly connects to a smart phone to customise, track and manage a tool’s performance and location. Unlimited Tool Customisation allows you to connect to the tool and access predetermined set-ups for specific fasteners and materials, or have complete control over output speed and power for the specific application at hand. With ONE-KEY, users now have a tool that delivers the most repeatable torque output in the industry. Users looking for a targeted torque range now have solution that will get users close to their targeted torque value, reducing the likelihood of significant under or over torque. Users will experience less rework, less damage, and increased productivity that will get users closer to their torque target and will finish with a calibrated torque device to reach their targeted torque value. The tool’s memory supports up to 4 custom profiles that can be easily accessed with the touch of a button on the tool. Once the profiles are saved to the tool, the connection to the smart phone is no longer necessary. Your custom profiles are also saved in the cloud so that they can be accessed at any time. Integrated tool tracking, also available through ONE-KEY, provides full visibility to how and where tools are being used across your network of jobs and users. The app will track all ONE-KEY compatible devices within the 30.5m range of your phone. By building the functionality into the tool, not the battery, all devices are trackable even if the battery is not charged or on the tool. The app will automatically keep records of the last time a tool was within range of the app, allowing you to pinpoint missing tools quicker and increase accountability of your crew. If you’re having trouble locating a lost tool, expand your search with the help of anybody with the ONE-KEY app. By opting in, when any phone with the app comes within 30.5m of your tool, you will receive an updated location. Paired with tracking, Integrated Tool Security provides the ultimate theft protection. Protect your investment with features like tool lock-out, or hide tool from the nearby devices screen so only you can see your tool is in range. If your tool is lost or stolen, render it useless by sending a remote command to the tool to shut itself off the next time it comes within range of any ONE-KEY app.
-
MILWAUKEE M18POALC-0 M18™ PACKOUT™ AREA LIGHT/CHARGER (TOOL ONLY)
$NZ465.00The M18™ PACKOUT™ Area Light/Charger provides users with multi-directional lighting coupled with integrated M18™ charging. The light provides up to 3,000 lumens of TRUEVIEW™ High Definition Output in high mode, and is fully compatible with the PACKOUT™ Modular Storage System. Three independent rotating light heads allow for complete control over lighting direction, whether being used within the PACKOUT™ stack while stationary or on the go, or as a dedicated light independent of the stack. Users have the ability to manage output and runtime, with three different modes (all lights, main panel, or back/front lights), each with high, medium, and low settings for a total of nine output settings. The M18 ™ PACKOUT™ Area Light/Charger, when using an M18™ REDLITHIUM™-ION 5.0Ah Battery, can provide users up to 31 hours runtime. For users using high mode for extended periods, the light can plug in for easy all day use. When plugged in, the light acts as a charger of M18™ batteries, while a 2.1A USB port is included on the M18™ PACKOUT™ Area Light/Charger for charging a phone or external device. Users can store small items inside the storage compartment as well.
-
MILWAUKEE M18PORC-0 PACKOUT™ RADIO + CHARGER (TOOL ONLY)
$NZ835.00The M18™ PACKOUT™ Radio + Charger is the ultimate jobsite sound system, and is fully compatible with all PACKOUT™ Modular Storage System solutions. This 10 speaker sound system delivers the user and the jobsite with 360° sound. The Milwaukee® M18™ PACKOUT™ Radio + Charger delivers full range connectivity with Bluetooth® 4.2, an auxiliary input, and an AM/FM radio. The Bluetooth® speaker also features a built-in M18™ charger. This heavy duty jobsite radio, with Bluetooth® connectivity, also features a built-in M18™ charger and 2.1A USB output to keep M18™ REDLITHIUM™-ION batteries and mobile devices charged all day long.
-
Milwaukee M18™ Compact Vacuum (Tool only)
$NZ319.00The M18 Compact Vacuum (M18CV-0) provides users with the most powerful & adaptable handheld cleanup tool. A high-performance motor creates best in class suction for cleanup of drywall dust, wood/metal shavings, and common job site debris. With a unique handheld design, the M18 Compact Vacuum can be used in a wide variety of orientations and applications across the job site. For added versatility, the M18CV-0 comes with (2) extension wands, 1.2m flexible hose, crevice tool, floor tool, and removable HEPA filter. A clear view and easy to empty canister provides added convenience. As a part of the M18 System of tools, it is powered by REDLITHIUM-ION battery packs (sold separately), which deliver up to 25 minutes of run time on a 5.0Ah battery pack and 43 minutes of runtime on a HIGH DEMAND 9.0Ah Battery Pack.
-
Milwaukee M18™ Cordless 2-Speed Grease Gun (Tool only)
$NZ695.00The M18 Cordless 2-Speed Grease Gun delivers maximum pressure and unmatched versatility. It offers an industry leading 10,000 PSI max operating pressure and a patent pending pre-set grease counter, that allows service and maintenance professionals to dispense precise amounts of grease. The tool’s 2-speed design offers users the ability to select between max pressure and max flow rate. Other unique features include an on-board LED light, a lock-on/lock-off trigger, and a plunger rod with markings to gauge how much grease is left in the barrel. The tool’s stand up design and shoulder strap capability offer user convenience, while limiting fatigue and the 1.2m flexible hose offers greater accessibility when greasing hard to reach fittings. The new tool is also compatible with a clear barrel accessory. Powered by an M18 REDLITHIUM-ION Battery pack, this is the industry’s only 18V grease gun that’s battery is compatible with a system of tools.
-
MILWAUKEE M18™ CORDLESS 310ML CAULK AND ADHESIVE GUN (TOOL ONLY)
$NZ425.00The cordless caulk and adhesive gun offers the most bead control. Deliver caulk or adhesives smoothly and steadily, even with the highest viscosity materials, with the incredible pushing force of the M18 Cordless 310ml Caulk and Adhesive Gun. All-metal gears provide 4500Nm of force, and CFT Constant Flow Technology eliminates motor oscillation for steady dispensing and even beads at all viscosity levels. A variable-speed trigger and six-setting maximum speed dial optimise the tool’s 0-212.54CMPM flow rate. The exclusive MILWAUKEE anti-drip mechanism prevents oozing of excess material when the trigger is released. A rotating collar gives you maximum bead control around turns, and the quick-change carriage design lets you change between 310ml and sausage-style containers. The M18 REDLITHIUM Battery (sold separately) lets you dispense more than 200 310ml tubes of construction adhesive on one charge. The gun comes with a 310ml carriage, 310ml plunger rod and piston assembly.
-
MILWAUKEE M18™ Transfer Pump (Tool Only) – M18TP-0
$NZ595.00Faster Water Transfers, Faster Service Calls. The M18™ Transfer Pump (M18TP-0) brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool’s flexible impeller and powerful pump moves water at up to 1817L per hour (30.3L per min), generates up to 5.5m of lift and produces up to 23m of head height. As a part of the M18™ System of tools, it is powered by REDLITHIUM™ battery packs, which deliver up to 900L moved per charge on a REDLITHIUM™ 5.0Ah battery pack. Onboard REDLINK™ Intelligence can recognise when the tool stops moving water and automatically shuts itself off to avoid dry pumping. Additionally, REDLINK™ provides optimised performance and overload protection in abusive situations.
-
MILWAUKEE M18TPFL0 M18 Three Panel Flood Light (Tool Only)
$NZ649.00Our M18™ Three Panel Flood Light delivers a high-performing 4,500 Lumens of flood and area lighting in a compact and portable size. The light has three folding panels that provide optimal lighting coverage, offering various brightness modes and individual light head power options for any jobsite need. With a versatile base featuring a hook, magnet, and keyholes, you can effortlessly mount this light overhead in any jobsite environment. The M18™ Three Panel Flood Light delivers 4,500 lumens of TRUEVIEW™ High-Definition Output for 3 hours of runtime on high mode with an M18™ REDLITHIUM™ 5.0Ah Battery. On its lowest brightness setting, the light provides up to 30 hours of runtime. Compatible with AC power, the light can provide all day runtime. Designed with the jobsite in mind, the M18™ Three Panel Flood Light can withstand drops up to 2.7 metres, and is backed with a 5 Year Tool and a limited lifetime LED Warranty.
-
MILWAUKEE M18USBPSHJ2 POWER SOURCE (TOOL ONLY)
The M18 Power Source, compatible with M18 REDLITHIUM-ION battery packs, features a powered USB port to charge cell phones, mp3 players, digital cameras, and other portable electronic devices. This adapter is also compatible with M12 heated jackets, providing up to 18 hours of continuous heat on a single charge with a M18 REDLITHIUM-ION battery pack.
-
MILWAUKEE PACKOUT™ Cyclone Debris Separator
$NZ205.00Specifications
Platform PACKOUT™Capacity 9.5LDimensions 412 x 249 x 328mmWeight 3.3 kgWarranty 3 YearsCompatibility Vacuum Compatibility: Wet & Dry Vacuums | Vacuum Mounting Clips Compatibility: M18FVC23L, M18FVC34L, M18FVC45LSeparation Efficiency Up to 99% of Saw DustExpandable Hose Diameter 47.6mm (1-7/8″)Multi-Fit Hose Adaptor Diameter 31.8mm (1-1/4”), 47.6mm (1-7/8”), 63.5mm (2-1/2”) -
MILWAUKEE RBA1 1/2″ ROUTER PLUNGE BASE
$NZ195.00The MILWAUKEE® 1/2″ Router Plunge Base expands the versatility and functionality of the MILWAUKEE® M18 FUEL™ 1/2“ Router (sold separately). The plunge base delivers smooth plunges at precise depths for accurate cuts in a wide variety of applications. The 1/2″ Router Plunge Base features 63.5mm (2-1/2″) of total plunge capacity, a 6-step depth turret at 3.18mm (1/8″) increments, and a depth rod with micro-adjustment to provide quick, repeatable cuts. A cam lock securely holds the tool and allows for base changes with the modular console, while the depth scale contains measurement markings in both inches and millimetres for increased ease of use. The plunge base is compatible with the 1/2″ Router Template Base, 1/2″ Router Track Adapter (RBA2), dust shroud and edge guide (all sold separately).
-
MILWAUKEE REDLITHIUM™ USB BLUETOOTH HEADPHONES 3.0 AH KIT
$NZ265.00The REDLITHIUM™ USB Bluetooth Headphones deliver UNCOMPROMISED SOUND, providing a powerful and balanced audio experience with the capability to take phone calls. Additionally, Jobsite Aware Mode provides situational awareness while reducing the intensity of loud external noises, allowing you to CONTROL YOUR AWARENESS. With up to 10 hours of runtime on a single charge, these ear buds deliver all-day runtime. The REDLITHIUM™ USB case battery provides up to 70 hours of runtime using multiple in-case charges. Built to survive on the jobsite, this audio solution is water, dust, & impact resistant. Designed for on-the-job use, passive hearing protection is provided by silicone and foam ear tips. Our ear buds are kitted with multiple interchangeable ear tips and wings, for a secure fit.
-
MILWAUKEE REDLITHIUM™ USB RECHARGEABLE 3 POINT LASER KIT
$NZ429.00FEATURES
15 hours of runtime on a single charge using REDLITHIUM™ USB 3.0Ah batteryVisibility range of up to 45 mHigh intensity green beams provide up to 4x the brightness compared to red lasers1 m drop ratingIP 54 rating to protect the laser from harsh jobsite conditionsInternally charges REDLITHIUM™ USB batteries via micro-USB portFuel gauge on the top and side of the laser allows for fast checking of battery chargeIntegrated magnetic bracket with rear mounted amplified rare earth magnets, 1/4″ tripod thread and hang hole allows for attachment to steel stud, wooden stud and tripod (48351411)SPECIFICATIONS
PLATFORMREDLITHIUM™ USBKITYesIP RATINGSIP54DIMENSIONS152 x 71 x 127 mmWEIGHT0.82 kgWARRANTY2 YearsNUMBER OF BEAMS3 PointsLOCKING PENDULUMYesSELF-LEVELING± 4° TiltACCURACY± 3.18 mm over 10 mIMPACT RESISTANT1 mWORKING RANGE45 mTHREAD MOUNT1/4″-20WHAT’S INCLUDED
(1) REDLITHIUM™ USB Rechargeable 3 Point Laser (L43PL)(1) L4 B3 REDLITHIUM™ USB 3.0Ah Battery(1) Heavy Duty Plug(1) AC Adaptor(1) Carrying Case -
MILWAUKEE REDLITHIUM™ USB RECHARGEABLE CROSS LINE LASER KIT
$NZ660.00FEATURES
8 hours of runtime on a single charge using REDLITHIUM™ USB 3.0Ah batteryVisibility range of up to 30 mHigh intensity green beams provide up to 4x the brightness compared to red lasers1 m drop ratingIP 54 rating to protect the laser from harsh jobsite conditionsInternally charges REDLITHIUM™ USB batteries via micro-USB portFuel gauge on the top and side of the laser allows for fast checking of battery chargeIntegrated magnetic bracket with rear mounted amplified rare earth magnets, 1/4″ tripod thread and hang hole allows for attachment to steel stud, wooden stud and tripod (48351411)SPECIFICATIONS
PLATFORMREDLITHIUM™ USBKITYesIP RATINGSIP54DIMENSIONS89WEIGHT1.0 kgWARRANTY2 YearsNUMBER OF BEAMS2 LinesLOCKING PENDULUMYesSELF-LEVELING± 4° TiltACCURACY± 3.18 mm over 10 mIMPACT RESISTANT1 mWORKING RANGE30 mRANGE WITH DETECTOR50 mTHREAD MOUNT1/4″-20WHAT’S INCLUDED
(1) REDLITHIUM™ USB Rechargeable Cross Line Laser (L4CLL)(1) L4 B3 REDLITHIUM™ USB 3.0Ah Battery(1) Laser Track Clip with Quick Connect (48351313)(1) Heavy Duty Plug(1) AC Adaptor(1) Carrying Case -
MILWAUKEE ROTARY GRADE ROD 5M
Original price was: $NZ153.00.$NZ125.00Current price is: $NZ125.00.The Rotary Grade Rod 5m designed to provide precise measurements when used with a laser line level. Made from aluminium, it features measurements in millimetres and E graduations. It can be retracted for easy carrying and storage.
-
MILWAUKEE ROTARY LASER TRIPOD 1,600MM
Original price was: $NZ323.00.$NZ255.00Current price is: $NZ255.00.The MILWAUKEE® Rotary Laser Tripod 1,600mm is a secure laser mounting solution to support a wide range of applications. Its durable aluminium design withstands impacts on the jobsite. The smooth height adjustment allows the legs to be quickly raised and lowered, making it easy to set up in any environment. The Rotary Laser Tripod also has a lightweight frame making it easy to transport on and off the jobsite and it includes a shoulder strap for added convenience. The Rotary Laser Tripod 1,600mm is equipped with a 5/8”-11 mounting thread and is compatible with all MILWAUKEE® Rotary Lasers.
-
MILWAUKEE WIRELESS LASER ALIGNMENT BASE W/ REMOTE
$NZ529.00The Wireless Laser Alignment Base w/ Remote provides users with an efficient and precise laser alignment for their layout tasks. This cutting-edge laser accessory streamlines alignment application, transforming what was once a two-person job into a seamless one-person operation saving time and labour on the jobsite. Equipped with a remote that features a range of up to 38m. The Wireless Laser Alignment Base features precision adjustments, offering step accuracy down to 2.38mm at 30m, enabling accurate alignment over long-range distances, and pivots smoothly on the plumb point for easy and fast alignment. With its adjustable legs, it accommodates slightly uneven surfaces to complete applications over ground-level materials without any hassle. The Wireless Laser Alignment Base is compatible with M12™ Lasers, REDLITHIUM USB™ Lasers, Alkaline Lasers and 1/4” – 20” Tripods.
-
SHINANO 1/2″ Air Impact Wrench SI-1490B
$NZ309.00Specification
Maximum TorqueNm/(ft-lb) 850/(627) Working Torque RangeNm/(ft-lb) 0-620/(0-457) Bolt Capmm/(in.) 20/(3/4) Free Speedr.p.m. (F)8,000
(R)8,500Weightkg/(lb) 1.9/(4.19) Noise Level *dBA/(power) 94/(105) Vibration a/k *m/s2 8.6/1.3 Avg.Air ConsumptionCFM/(L/S) 5.1/(2.4) Air Inlet Sizein. 1/4 Hose Sizemm/(in.) 10/(3/8) -
SHINANO 1/2″ Air Impact Wrench SI-1610
Original price was: $NZ385.00.$NZ355.00Current price is: $NZ355.00.Specification
Maximum TorqueNm/(ft-lb) 450/(332) Working Torque RangeNm/(ft-lb) 0-320/(0-258) Bolt Capmm/(in.) 16/(5/8) Free Speedr.p.m. (F)8,000(R)8,500 Weightkg/(lb) 1.04/(2.29) Noise Level *dBA/(power) 94/(105) Vibration a/k *m/s2 7.7/1.3 Avg.Air ConsumptionCFM/(L/S) 3.8/(1.8) Air Inlet Sizein. 1/4 -
SHINANO 3/4″ Air Impact Wrench SI-1550
$NZ695.00Specification
Maximum TorqueNm/(ft-lb) 1,650/(1,217) Working Torque RangeNm/(ft-lb) 0-1,320/(0-974) Bolt Capmm/(in.) 24/(15/16) Free Speedr.p.m. (F)6,000(R)6,500 Weightkg/(lb) 3.25/(7.2) Noise Level *dBA/(power) 92/(103) Vibration a/k *m/s2 11.2/1.6 Avg.Air ConsumptionCFM/(L/S) 8.0/(3.8) Air Inlet Sizein. 3/8 Hose Sizemm/(in.) 13/(1/2) -
STEALTHMOUNTS Tool Mount for Makita XGT
Original price was: $NZ42.90.$NZ39.00Current price is: $NZ39.00.Features:
- Tools lock into place securely perfect for workshops, tool trailers and work vehicles
- Allows for maximum use of space in your work area.
- Made in Great Britain
- Made with strong injection moulded ABS plastic
- Protect tools by keeping them up and out of the way
- Saves precious workshop space!
Specifications:
- Length: 85mm
- Width: 65mm
- Depth: 16mm
- Colour: Blue
- Quantity: 4 pack
- Packaging: 215 x 75 x 35mm
-
SYKES 300607 – PROFESSIONAL SLIMLINE LED HEADLAMP
Original price was: $NZ74.00.$NZ59.00Current price is: $NZ59.00.- Lightweight and easy to use LED headlamp allows for ease of lighting in dark areas while keeping your hands free
- Features three lighting modes: Eco, Normal and Sense Mode
- Sense Mode allows for a truly hands free operation by just swiping your hand in front on the motion sensor to either quickly turn on or off the headlamp
- Adjustable headband and inbuilt tilt capability to 45° allowing for numerous lighting positions
- Water and dust resistant (IP54)
- High impact ABS plastic housing with impact resistant polycarbonate lens
- Rechargeable Li-ion battery via the supplied USB charging lead
-
SYKES-PICKAVANT 300606 – PROFESSIONAL FOLDABLE LED SLIMLIGHT
Original price was: $NZ118.30.$NZ89.00Current price is: $NZ89.00.- Handy foldable pocket pen light for quick and easy illumination of dark work areas
- Features three lighting modes: front fold out Flood Light with normal and eco modes, rear Flood Light and direct beam Top light
- Strong magnetic base allows for hands free operation
- High impact ABS plastic housing with impact resistant polycarbonate lens, fold out floodlight housing made from lightweight aluminium
- Rechargeable Li-ion battery via the supplied USB charging lead
-
SYKES-PICKAVANT 300608 – PROFESSIONAL TWINBEAM POCKET WORKLIGHT
Original price was: $NZ147.80.$NZ99.00Current price is: $NZ99.00.- Multifunctional Twinbeam worklight contains both a spot light and flood light
- Pocket sized makes it versatile for a large range of lighting applications
- Features four lighting modes: Direct beam spotlight and Eco, Normal and Full Power flood light modes
- 180° flexible handle with inbuilt super strong magnet
- Handy battery level indictor
- High impact ABS plastic housing with impact resistant polycarbonate lens
- Rechargeable Li-ion battery via the supplied USB charging lead
-
SYKES-PICKAVANT 680004 – PROFESSIONAL DIAMOND TIPPED MINI ENGRAVER
Original price was: $NZ78.50.$NZ60.00Current price is: $NZ60.00.- Handy pocket engraver easily marks glass, ceramic, plastic and hardened metals
- Long lasting diamond tip
- Suitable for personalising toys, sport equipment, tools, appliances, gifts and trophies
-
Teng 1/2in Dr. Mini Air Impact Wrench 770Nm
Original price was: $NZ372.30.$NZ299.00Current price is: $NZ299.00.ARWM12M – 1/2in Drive Mini Air Impact Wrench
Features:
• Aluminium Housing
• Hanging hook
• Jumbo Hammer Mechanism
• One-hand forward/reverse
• 3-step forward/reverse
• Ergonomic handle design
