Crescent
-
CRESCENT 150mm/6″ 2-in-1 Extendable Speed Square
FEATURES- Acts as a continuous edge for scribing and marking
- 2-in-1 capabilities, making woodworking and framing simpler
- Solid aluminium
- Laser etched markings
- Quick access thumb lock
-
CRESCENT 20 Oz. Hatchet with Fiberglass Handle
FEATURES- Precision ground blade with optimal cutting angle splits wood with ease
- Wrap around head and neck prevents the hatchet from separating from the handle
- Textured fawns foot grip give users an ergonomically sound and sure grip
- Rear striking face for driving stakes, nails and demolition work
- Heavy duty, oversized protective sleeve prevents damage due to overstrike
-
CRESCENT 20 oz. Steel General Purpose Hammer
Features
- Utilises vibration dampening slot technology, coupled with a vibration control handle made from proprietary materials to minimise vibration when striking by 70%
- Optimised strike face with 15% larger sweet spot to prevent miss hit and provide greater impact
-
CRESCENT 200mm/8″ Locking Sheet Metal Clamp
FEATURES- Compound action for powerful non-slip locking grip
- After initial grip is set, clamp can be tightened further by turning the adjusting screw with a hex key
- Red plastisol dip on release lever for improved comfort
- Nickel-plated finish resists rust and corrosion
- Maximum jaw opening meets ASME specifications
-
CRESCENT 22 oz Steel Milled-Face Framing Hammer
Features
- Utilizes vibration dampening slot technology, coupled with a vibration control handle made from proprietary materials to minimize vibration when striking by 70%
- Optimized strike face with 15% larger sweet spot to prevent miss hit and provide greater impact
- Magnetic nail starter holds nails securely under the hammer head for quick and easy one hand nail starting
-
CRESCENT 3 Piece Dual Material Nail Punch Set
eatures- Full metal core from the strike cap to the tip provides added strength when striking
- Comfort grip designed to reduce user fatigue
- Oversized strike cap for added safety
- Handle designed with parallel flats to reduce tool roll off
- Color-coded by tip size for easy identification
- Contains: 1/32″ 0.8mm, 2/32″ 1.8mm, 3/32″ 2.4mm
-
CRESCENT 30m/100′ 3:1 Chalk Reel
Features
- 3:1 gear crank ratio for faster rewind
- Sliding door for quick and easy chalk refilling
- Centerline marker for use as a plumb bob
-
CRESCENT 38 Piece VORTEX™ alphaCASE™ Set
The Crescent 38-piece fastening set is built for the most demanding jobsites. The stack and store alphaCASE™ features a tongue and groove design with thick sidewall construction. The 38-piece set includes a bonus Crescent patented non-marring u-GUARD covered bit holder which protect final finishes from damage, and the Crescent VORTEX™ line of torsion bits with optimized tip geometry for fit to the fastener. Screwdriving bit tips include Square, Phillips®, Torx®, Slotted. Bits are secured in pivoting insert rails inside the case, allowing easy access to bits and case configurability.
-
CRESCENT CHR10 Industrial Hand Riveter
Features
- Premium quality hand riveter, suitable for professional and trade applications
- Toolless jaw change
- Ergonomic handle design
-
CRESCENT Compact Folding Utility Knife
Ultra-thin, ergonomic frame design for convenient storage and retrieval. Sleek clip design for deep pocket carry. Slide button for easy tool-free blade change.
-
CRESCENT CPTAW8 11 Piece Pass-Thru™ X6™ Black Oxide Adjustable Wrench and Spline Socket Set
The Crescent Pass-Thru™ Adjustable Wrench Set provides the benefits of three tools in one product. It includes a standard adjustable wrench with a maximum 1-1/8-inch jaw capacity, but the jaw on the wrench head can be easily removed and reversed, turning it into an adjustable pipe wrench with a maximum 1-inch capacity. On the opposite end, the traditional hang-hole has been transformed into a ratcheting pass-thru ratchet head that can be used with the included SAE/Metric Universal Sockets.
-
CRESCENT CX6PT25 25 Piece 3/8″ Drive Pass-Thru™ X6™ Standard Spline Mechanics Tool Set
The Crescent X6™ Pass-Thru™ ratchet and sockets set provides you with the innovation of the X6 design in the box end, allowing you to grip 6 different types of fasteners. Discover the convenience of pass-thru sockets that functionally replace one deep and one standard socket, and access restricted fasteners with the low-profile ratchet and socket combinations. This set includes the following sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, and 7/8″. The set also features a 3/8″ drive bit adapter socket turning the ratchet into a bit driver.
-
CRESCENT eSHOK-GUARD™ Magnetic Isolated Bit Holder 1/4″ x 3″
Protect yourself from electric shock with Crescent’s new patented isolated technology, eSHOK-GUARD™, providing insulation of up to 1,000 volts. Combining safety and convenience for a revolutionary experience when working around potential live wire applications, eSHOK-GUARD’s impact-rated design withstands heavy-use, impact tool applications, so you never have to sacrifice protection when using power tools. With over 85% of professionals experiencing shocks on construction job sites, eSHOK-GUARD™ is protecting you – for life.Features
- Isolation zone insulates standard bits with protection up to 1000V
- Withstands heavy use in impact applications
- Magnetic tip keeps fasteners securely in place
-
CRESCENT Hybrid EDC Folding Utility Knife
Features
- Combines the ergonomics of a pocket knife with the blade-changing functionality of a utility knife.
- Resilient handle construction stands up to heavy use and tough jobsite conditions.
- A Sleek Lowpro or EDC position that keeps the knife ‘hidden’, allowing users to clip on and off belt/pocket all day long.
-
Crescent Lufkin 100′ Aluminum Chalk & Reel with Blue Chalk
These Crescent Lufkin chalk reels have all the features pros want with the durability they need. With famous Crescent Lufkin quality, they’re the perfect choice for pros who demand value.
-
CRESCENT LUFKIN 30m/100′ 3:1 Chalk & Reel with Blue Chalk
Features
- 3:1 gear crank ratio for faster rewind
- Sliding door for quick and easy chalk refilling
- Centerline marker for use as a plumb bob
-
CRESCENT LUFKIN Shockforce Nite Eye™ G2 10m X 32mm Tape Measure
Features
- Thicker protective blade coating in addition to an extra protective barrier on the first 160mm provide increased tape durability
- Wider, thicker blade that provides up to 5 metres of reach
- Matte finish, white on black markings increase the tape’s visibility in all light conditions
-
CRESCENT LUFKIN Shockforce Nite Eye™ G2 8m X 32mm Magnetic Tape Measure
Features
- Thicker protective blade coating in addition to an extra protective barrier on the first 160mm provide increased tape durability
- Wider, thicker blade that provides up to 5 metres of reach
- Matte finish, white on black markings increase the tape’s visibility in all light conditions
-
CRESCENT LUFKIN Shockforce™ G2 10M X 32mm Tape Measure
Features
- Thicker protective blade coating in addition to an extra protective barrier on the first 160mm provide increased tape durability
- Wider, thicker blade that provides up to 5 metres of reach
- Improved end hook protects the entire front of the tape and prevents the tape from snagging and tearing
-
CRESCENT NICHOLSON CHAINSAW FILE 3/16″
The Crescent Nicholson round knurl-cut chainsaw file with an American pattern. For ideal results, place file against beveled cutting surface of the teeth 20° to 45° with saw and file from the inside to the outside of cutter. Sharpen all left-hand cutters on one side of the chain and move to the other side and file all the right-hand cutters. The height between cutting teeth and depth gauge is between .020″ to .030″ — check the depth gauge height every 2 or 3 sharpening’s. Tighten the tension on chain to firmly support cutters when filing.
-
CRESCENT NICHOLSON CHAINSAW FILE 5/32″
The Crescent Nicholson round knurl-cut chainsaw file with an American pattern. For ideal results, place file against beveled cutting surface of the teeth 20° to 45° with saw and file from the inside to the outside of cutter. Sharpen all left-hand cutters on one side of the chain and move to the other side and file all the right-hand cutters. The height between cutting teeth and depth gauge is between .020″ to .030″ — check the depth gauge height every 2 or 3 sharpening’s. Tighten the tension on chain to firmly support cutters when filing.
