Countersinks
-
Alpha 3 Flute HSS Cobalt Countersink 10.4mm
Alpha HSS Cobalt 3 Flute 90° Countersink
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Three flute construction reduces chip load and controls chatter, which permits higher feed rates. Recommended machine use for accurate speed and feed rates for optimum results.
The Alpha three flute countersinks are the most multipurpose countersinks in the range
Suitable for countersinking all metals, plastics and wood
-
Alpha 3 Flute HSS Cobalt Countersink 12.4mm
Alpha HSS Cobalt 3 Flute 90° Countersink
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Three flute construction reduces chip load and controls chatter, which permits higher feed rates. Recommended machine use for accurate speed and feed rates for optimum results.
The Alpha three flute countersinks are the most multipurpose countersinks in the range
Suitable for countersinking all metals, plastics and wood
-
Alpha 3 Flute HSS Cobalt Countersink 14.4mm
Alpha HSS Cobalt 3 Flute 90° Countersink
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Three flute construction reduces chip load and controls chatter, which permits higher feed rates. Recommended machine use for accurate speed and feed rates for optimum results.
The Alpha three flute countersinks are the most multipurpose countersinks in the range
Suitable for countersinking all metals, plastics and wood
-
Alpha 3 Flute HSS Cobalt Countersink 16.5mm
Alpha HSS Cobalt 3 Flute 90° Countersink
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Three flute construction reduces chip load and controls chatter, which permits higher feed rates. Recommended machine use for accurate speed and feed rates for optimum results.
The Alpha three flute countersinks are the most multipurpose countersinks in the range
Suitable for countersinking all metals, plastics and wood
-
Alpha 3 Flute HSS Cobalt Countersink 6.3mm
Alpha HSS Cobalt 3 Flute 90° Countersink
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Three flute construction reduces chip load and controls chatter, which permits higher feed rates. Recommended machine use for accurate speed and feed rates for optimum results.
The Alpha three flute countersinks are the most multipurpose countersinks in the range
Suitable for countersinking all metals, plastics and wood
-
Alpha 3 Flute HSS Cobalt Countersink 8.3mm
Alpha HSS Cobalt 3 Flute 90° Countersink
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Three flute construction reduces chip load and controls chatter, which permits higher feed rates. Recommended machine use for accurate speed and feed rates for optimum results.
The Alpha three flute countersinks are the most multipurpose countersinks in the range
Suitable for countersinking all metals, plastics and wood
-
ALPHA Single Flute HSS Cobalt Countersink 10mm
Alpha HSS Cobalt 1 Flute 90° Countersink
• Simple to sharpen by grinding the face of the flute
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Suitable for countersinking non-ferrous metals
Single flute construction provides less aggressive and slower cutting than multi-flutes, therefore reducing the risk of chattering permitting optimum performance for the handyman and portable power tools
-
Alpha Single Flute HSS Cobalt Countersink 16mm
Alpha HSS Cobalt 1 Flute 90° Countersink
• Simple to sharpen by grinding the face of the flute
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Suitable for countersinking non-ferrous metals
Single flute construction provides less aggressive and slower cutting than multi-flutes, therefore reducing the risk of chattering permitting optimum performance for the handyman and portable power tools
-
Alpha Single Flute HSS Cobalt Countersink 20mm
Alpha HSS Cobalt 1 Flute 90° Countersink
• Simple to sharpen by grinding the face of the flute
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Suitable for countersinking non-ferrous metals
Single flute construction provides less aggressive and slower cutting than multi-flutes, therefore reducing the risk of chattering permitting optimum performance for the handyman and portable power tools
-
Alpha Single Flute HSS Cobalt Countersink 25mm
Alpha HSS Cobalt 1 Flute 90° Countersink
• Simple to sharpen by grinding the face of the flute
• Fully ground M42 HSS-Co8 increases strength and countersink life
• Suitable for countersinking non-ferrous metals
Single flute construction provides less aggressive and slower cutting than multi-flutes, therefore reducing the risk of chattering permitting optimum performance for the handyman and portable power tools
-
Alpha TCT Countersink 2.8mm
Ideal for Timber Decking & Cement Sheet
• Tungsten carbide tipped pilot drill with improved chip extraction, allowing increased feed rates & shorter cycle times
• Adjustable depth stop suitable for flush mounting & deep enough to accommodate a plug
• Packaged with grub screw for replacing drill
Countersink Features:
• 90° Angle
• Three flutes
• Tungsten Carbide Tipped
-
Alpha TCT Countersink 3.0mm
Ideal for Timber Decking & Cement Sheet
• Tungsten carbide tipped pilot drill with improved chip extraction, allowing increased feed rates & shorter cycle times
• Adjustable depth stop suitable for flush mounting & deep enough to accommodate a plug
• Packaged with grub screw for replacing drill
Countersink Features:
• 90° Angle
• Three flutes
• Tungsten Carbide Tipped
-
Alpha TCT Countersink 3.5mm
Ideal for Timber Decking & Cement Sheet
• Tungsten carbide tipped pilot drill with improved chip extraction, allowing increased feed rates & shorter cycle times
• Adjustable depth stop suitable for flush mounting & deep enough to accommodate a plug
• Packaged with grub screw for replacing drill
Countersink Features:
• 90° Angle
• Three flutes
• Tungsten Carbide Tipped
-
GFB Adjustable Countersink Bit for 10g Screws
ADJUSTABLE COUNTERSINK BIT FOR 10g SCREWS
Designed for the effective countersinking of hard wood, soft wood and pine, MDF, particle board and cement sheets./p>
Features
- Ball Bearing depth stop prevents marking of material
- Tungsten carbide tipped for a cleaner cutting edge
- Extra wide clearance to stop jamming
- 9/64″ Pilot drill
- 3/8″ Countersink
- Bonus replacement drill bit included
-
GFB Adjustable Countersink Bit for 12g Screws
ADJUSTABLE COUNTERSINK BIT FOR 12g SCREWS
Designed for the effective countersinking of hard wood, soft wood and pine, MDF, particle board and cement sheets./p>
Features
- Ball Bearing depth stop prevents marking of material
- Tungsten carbide tipped for a cleaner cutting edge
- Extra wide clearance to stop jamming
- 5/32″ Pilot drill
- 3/8″ Countersink
- Bonus replacement drill bit included
-
GFB Adjustable Countersink Bit for 8g Screws
ADJUSTABLE COUNTERSINK BIT FOR 8g SCREWS
Designed for the effective countersinking of hard wood, soft wood and pine, MDF, particle board and cement sheets./p>
Features
- Ball Bearing depth stop prevents marking of material
- Tungsten carbide tipped for a cleaner cutting edge
- Extra wide clearance to stop jamming
- 1/8″ Pilot drill
- 3/8″ Countersink
- Bonus replacement drill bit included
-
P & N 3PC Countersink Set – 90° Three Flute – DIN
P&N 90° Three Flute Countersink for countersinking / counterboring screw holes. Made from High Speed Steel for use in steel, tool steel. Stainless steel, cast iron, brass & aluminium. Can be used in portable & pedestal drilling machines.
SIZES: 8.3, 12.4 & 20.5mm
-
TUFF Quick-Cut Countersink 10G
• Designed for drilling and countersinking with one tool.
• For use in hard or soft timber decking, plastic, fibre cement board.
• Fully adjustable depth stop for accurate control of countersink.
• Rubber stop collar prevents tool from marking the surface.
• Steel Bearings to ensure smooth operation.
Includes 2x Spare Pilot drills
3x TCT Pilot Drill for cement sheet board and compressed sheet
-
TUFF Quick-Cut Countersink 12G
• Designed for drilling and countersinking with one tool.
• For use in hard or soft timber decking, plastic, fibre cement board.
• Fully adjustable depth stop for accurate control of countersink.
• Rubber stop collar prevents tool from marking the surface.
• Steel Bearings to ensure smooth operation.
Includes 2x Spare Pilot drills
3x TCT Pilot Drill for cement sheet board and compressed sheet
-
TUFF Quick-Cut Countersink 14G
• Designed for drilling and countersinking with one tool.
• For use in hard or soft timber decking, plastic, fibre cement board.
• Fully adjustable depth stop for accurate control of countersink.
• Rubber stop collar prevents tool from marking the surface.
• Steel Bearings to ensure smooth operation.
Includes 2x Spare Pilot drills
3x TCT Pilot Drill for cement sheet board and compressed sheet
-
TUFF Quick-Cut Countersink 8G
• Designed for drilling and countersinking with one tool.
• For use in hard or soft timber decking, plastic, fibre cement board.
• Fully adjustable depth stop for accurate control of countersink.
• Rubber stop collar prevents tool from marking the surface.
• Steel Bearings to ensure smooth operation.
Includes 2x Spare Pilot drills
3x TCT Pilot Drill for cement sheet board and compressed sheet
