Dewalt
-
DEWALT 18V XR 55CM HEDGE TRIMMER – BARE UNIT
$NZ315.00- POWER & RUN TIME – Power to do the Job, Run time for the day. 55cm blade & 75 minutes runtime
- CUT CAPACITY – 25 mm blade gap will guaranty higher performance and less jams
- EASE OF USE & ERGONOMICS – Lightweight and balanced to reduce user fatigue. 2.9 Kg, Overmould for higher comfort and better grip.
-
DEWALT 18V XR CORDLESS PLANER BARE UNIT
Original price was: $NZ585.00.$NZ450.00Current price is: $NZ450.00.- Powerful brushless motor provides smooth planing performance combined with extended runtime
- Lightweight, compact and ergonomic design for comfortable use in all orientations
- Large twin blade drum with TCT blades for high quality surface finish
- On-board blade storage and Torx key enable fast blade change and minimise downtime
- Large front and rear shoe for improved stability
- Compatible with AirLock dust extraction system
STANDARD
- Tungsten carbide tipped reversible blades
- Hex wrench
- Torx key
- Guide fence
- Batteries and charger sold separately
- Blade alignment plate
-
DEWALT 18V XR HEAT GUN – BARE UNIT
$NZ289.00- DCE530 XR Heat Gun reaches a temperature of 530°C on a high setting and 290°C on a low setting
- Select a high or low temperature setting with the 2-set temperature selector, optimising temperature for specific applications
- Keep the tool switched on using the lock-on button to improve comfort for longer applications and hands-free use
- The trigger with a built in lock-off switch prevents an accidental start up during transportation and storage, reducing risk of thermal accidents
- A built-in LED light illuminates the work place and improves visibility in small, confined spaces
- Fully compatible with all DEWALT 18V XR batteries
STANDARD
- DCE530 Cordless Heat Gun
- Reflector Nozzle
- Surface Nozzle
-
DEWALT 54V XR FLEXVOLT BRUSHLESS 3 MODE DEDICATED CORDLESS HAMMER BARE UNIT
$NZ880.00Category-leading high speed drilling performance at more than 66 holes (18mm Ø x 80mm) per charge
Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
Brushless motor for extreme runtime and reduced maintenance
-
DEWALT DCB184-XE 18V 5.0AH BATTERY
$NZ215.00The new DEWALT 5.0Ah XR Li-Ion battery packs will deliver 66% more runtime than a standard 3.0Ah battery pack
LED State of Charge Indicator helps manage pack charging
Lightweight design provides the user with upgraded 5Ah Power without increasing the size or weight over the 18V 3Ah battery pack
-
DEWALT DCC018N-XJ 18V XR INFLATOR
$NZ289.00- Compact, lightweight, high-performance inflator and deflator with an LED light allows use at night or in low-light conditions
- High pressure hose quickly inflates items such as tyres (size 235/70R17) inflated in 400 seconds
- Output of 0.35l/min@6.2 bar and 0.6l/min@2 bar for quick inflation
-
DEWALT DCD1007WW1T-XE 18V XR Brushless Premium Hammer Drill Driver – 1 X 8Ah
$NZ799.00Dewalt’s most powerful 18V XR Hammer Drill Driver uses a DEWALT XR Brushless motor to deliver 169Nm of torque in a 193mm body, engineered to give you faster application speeds on the toughest jobsites. Pack ID Technology allows this tool to deliver more power when paired with an 18V XR POWERSTACK or XR FLEXVOLT battery. 3 speed and 11 torque settings give you the ultimate control over drilling and fastening applications. The Anti-Rotation system detects bind-ups and shuts down the tool helping to protect you. An enhanced pivoting 70 lumen LED positioned on the foot offers greater visibility in dark and confined spaces.
-
DEWALT DCD1623N-XJ 18V XR MAGNETIC DRILL WITH PERMANENT MAGNET – Bare Unit
$NZ2,595.00- Maximum drilling capacity of 50 mm with annual cutters
- Brushless Motor provide corded drill performance and can complete 40x20mm Holes on 12 mm Steel per battery Charge (9 AH)
- 2 speed mechanical transmission along with 5 electronic variable speed in order to achieve optimal drilling speed for small and large diameter bits
-
DEWALT DCD740N-XE 18V XR Right Angle Drill – Bare Unit
$NZ440.00- Ergonomic handle and rubber over mould to provide ultimate end user comfort
- Multi voltage charger for use with 18V, 14.4V and 10.8V XR Li-Ion slide pack batteries
- Steel belt clip and tough magnetic bit holder ensures strong storage solutions
-
DEWALT DCD996N-XE 18V XR XRP Hammer Drill Driver (Bare Unit)
$NZ399.00DCD996N-XE18V XR XRP Hammer Drill Driver (Bare Unit)
- DEWALT‘s most powerful 18V XR Li-Ion Brushless XRP hammer drill driver
- Automatic high speed hammer drill driver at 38,250 BPM increasing users masonry drilling speed of application
- 3 Mode LED torch, High/Medium/Low settings with High output 20min LED delay lighting up your work place
-
DEWALT DCD999N-XE 18V XR XRP Hammer Drill Driver With FLEXVOLT ADVANTAGE – Bare Unit
$NZ555.00- FLEXVOLT ADVTANGE tool technology: the tool uses intelligent electornics to sense what battery is in the tool and increase power and torque when using FLEXVOLT batteries
- 51% more power when using DCB547 XR FLEXVOLT 9Ah battery compared with DCB184 18V XR 5Ah battery
- 42% more power when using DCB546 XR FLEXVOLT 6Ah battery compared with DCB184 18V XR 5Ah battery
-
DEWALT DCD999T1-XE 18V XR Brushless Premium Hammer Drill Driver – 1 X 6Ah Batteries
$NZ519.00- 18V XR Brushless Premium Hammer Drill Driver with Compact Design
- BRUSHLESS MOTOR: Delivers high performance, extends tool life and allows for a much shorter design
- 11-POSITION ADJUSTABLE TORQUE CONTROL: For consistent screwdriving into a variety of materials
-
DEWALT DCE0822D1G-XE 12V XR 2 Spot Cross Line Green Laser – 1 X 2Ah
$NZ699.00- 12V rechargeable battery platform – For extra long time and the convenience of rechargeable batteries
- Projects a full cross line (horizontal & vertical) + 2 independent spot points allows multi-use tool
- Cross line function feature a 150 degree fan angle which provides ample coverage with little set-up time
-
DEWALT DCE089D1G 12V XR 3 X 360 CROSS LINE GREEN LASER KIT
$NZ910.00OVERVIEW
- x3 360°Self Leveling Lines
- Projects bright horizontal and vertical lines.
- Variable blink sequence for manual mode.
- Working range : 30M (60M w/ detector)
- Accuracy : +/-3mm@10m
- Full-time pulse mode allows use with detector maintians full brightness for visibility
- 12V battery pack included
- Upgradable battery for extended life, fast change time, less down time
- Locking Pendulum to help prevent damage to internal components
- Integrated Magnetic Pivoting Base with ¼” Thread
- Wear resistant – overmold : IP65 / 2m drop tested
-
DEWALT DCE555N-XJ 18V XR Drywall Cut Out Tool
$NZ289.00- 18V OR30 Brushless Motor Powerful, Compact Brushless Motor With High Working Efficiency Provides Class Leading Power & Runtime Levels. Runtime = 54 Meters of 12.5mm Drywall Per 5Ah Battery or.. 116 Standard 2-Gang Electrical Back Boxes
- 18V Battery Compatibility Continuous High Working Unit Performance & Largest DEWALT Battery Platform
- Removable Depth Guard Adjustable Guard Allows User To Set Required DOC Easily & Accurately
-
DEWALT DCE6820N-XJ 18V XR Water Tank
$NZ399.00- The 18V battery powered water tank provides 15L of steady water flow without having to be manually pressurised
- The easy-to-use control panel allows the user to turn on the water supply quickly, no manual pumping required
- With two large handles, the water tank is very comfortable to move around
-
DEWALT DCF403NT-XJ 18V XR Brushless 4.8mm Rivet Tool – Bare Unit
$NZ625.00- 18V XR Brushless, Cordless Rivet Gun that delivers fast and easy riveting performance
- Fasten all bilnd rivets from 2.4 mm , 3.2 mm , 4.0 mm and 4.8 mm to offer bigger range of application
- 10,000 N of pulling force and 25mm Stroke will give you a power to complete the application in one go and increase the performance on the job site
-
DEWALT DCF414NT-XJ 18V XR Brushless 6.3mm Rivet Tool – Bare Unit
$NZ915.00- 18V XR Brushless, Cordless Rivet Gun that delivers fast and easy riveting performance
- Fasten all blind rivet from 4.8 mm , 6.0 mm and 6.4 mm to offer bigger range of application
- 20,000 N of pulling force and 30mm Stroke will give you a power to complete the application in one go and increase the performance on the job site
-
DEWALT DCF620KN-XE 18V C/L COLLATED SCREW DRIVER
$NZ479.0018V XR Li-Ion BRUSHLESS Drywall Screwdriver for efficient fitting of drywall
Powerful 4400rpm BRUSHLESS motor drives screws efficiently and effectively offering maximum runtime and a compact tool
One of the lightest and most compact tools on the market – it ensures that you can work comfortably and get into small spaces
-
DEWALT DCF840N-XJ 18V XR Brushless Impact Driver – Bare Unit
Original price was: $NZ169.00.$NZ149.00Current price is: $NZ149.00.- 18V XR Brushless Impact Driver
- 18V XR BRUSHLESS MOTOR: Delivers high performance, extends tool life and allows for a much shorter design
- UP TO 192 Nm TORQUE: Allows you to achieve tough applications
-
DEWALT DCF850N-XJ 18V XR Brushless Compact Impact Driver – Bare Unit
Original price was: $NZ395.00.$NZ299.00Current price is: $NZ299.00.- Application control is achieved through 3 motor speeds and torque settings including Precision Drive
- New compact brushless motor allows you to fit into tight spaces
- Compatible with all DEWALT 18V XR & Flex Volt battery packs
-
DEWALT DCF891N-XJ 18V XR Brushless 1/2″ Hog Ring Mid Torque Impact Wrench – Bare Unit
$NZ495.00- 18V XR BRUSHLESS Mid-Range Impact Wrench
- 18V XR BRUSHLESS MOTOR: Delivers high performance, extends tool life and allows for a much shorter design
- 1/2 in. SQUARE DRIVE WITH HOG RING: Allows quick socket changes
-
DEWALT DCF892N-XJ 18V XR Brushless 1/2″ Detent Pin Mid Torque Impact Wrench – Bare Unit
$NZ495.00The DCF892 18V XR Impact Wrench with Detent Pin Anvil was designed to easily handle various fastening projects. Get up to 812Nm of fastening torque and 1084Nm of max breakaway torque in a 175mm long body with this compact power tool that offers easy maneuverability without sacrificing power. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility. Dark work areas are no problem with this Cordless Impact Wrench, which comes with an LED work light for visibility in dimly lit spaces. -
DEWALT DCF894N-XJ 18V XR Brushless Compact High Torque 1/2″ Impact Wrench – Bare Unit
Original price was: $NZ469.00.$NZ299.00Current price is: $NZ299.00.- All-new 18V BRUSHLESS XR Compact High-Torque Wrench featuring Precision Wrench™
- Powerful fan cooled motor delivers up to 447Nm of torque and 3100 impacts per minute for heavy duty fastening applications
- At just 178mm long and weighing only 1.5kg, the tool retains power whilst being compact enough to get into tight spaces
-
DEWALT DCF900N-XJ 18V XR Brushless 1/2″ Hog Ring High Torque Impact Wrench – Bare Unit
$NZ575.00- 1/2” square drive with hog ring allows quick socket changes
- Variable trigger allows complete control over all applications
- Efficient brushless motor delivers high performance, extends tool life and allows for much shorter design
-
DEWALT DCG200NT-XJ 54V XR FLEXVOLT WALL CHASER – BARE UNIT
Original price was: $NZ915.00.$NZ799.00Current price is: $NZ799.00.- 54V Brushless motor enables improved performance in demanding applications
- Electronic Brake stops the wheel quickly when the trigger is disengaged
- Electronic Clutch reduces the kickback reaction in the event of a pinch or stall
-
DEWALT DCG405N-XJ 18V ANGLE GRINDER SKIN
Original price was: $NZ450.00.$NZ339.00Current price is: $NZ339.00.Includes
- (1) 2 position side handle
- (1) Keyless protective guard
- (1) Blade wrench
Specifications
PRODUCT WEIGHT [METRIC]1.74 KGPRODUCT HEIGHT [IMPERIAL]36 INPOWER SOURCECORDLESSPRODUCT LENGTH [METRIC]310 MMPRODUCT WEIGHT [IMPERIAL]0.54 LBS -
DEWALT DCG406N-XJ 18V XR Brushless 125mm Angle Grinder Skin
$NZ450.00Features
- 18V Brushless Motor
- Electronic Brake stops the wheel quickly when the trigger is released
- Electronic Clutch reduces the kickback reaction in the event of a pinch or stall
- Mesh Covers restricts dust being sucked through the motor
- Rubber Overmould provides enhanced grip and comfort
- Two position side handle offers greater comfort and control
Includes
- (1) 2 position side handle
- (1) Keyless protective guard
- (1) Blade wrench
Specifications
SUPPLIED IN KITBOXNONO LOAD SPEED (RPM)9000BRAKEYESPRODUCT WEIGHT [METRIC]1.75 KGPRODUCT HEIGHT [IMPERIAL]14 INPOWER SOURCECORDLESSPRODUCT LENGTH [METRIC]310 MMPRODUCT WEIGHT [IMPERIAL]9 LBS -
DEWALT DCG416N-XE 18V XR 125mm Angle Grinder With FLEXVOLT ADVANTAGE – Bare Unit
$NZ499.00- PACK ID Technology allows this tool to deliver more power when paired with an XR FLEXVOLT battery
- The brushless motor ensures longer operating time and durability
- The electronic brake stops the disc quickly when the shutter-release button is released
-
DEWALT DCG416VSN-XJ 18V XR 125mm Variable Speed Angle Grinder – Bare Unit
$NZ499.00- Brushless motor technology delivers improved power efficiency and longer runtime for extended life
- Variable speed gives ultimate control for a wider range of applications
- Electronic brake stops the wheel quickly when the trigger is released
-
DEWALT DCG440N-XJ 54V XR FLEXVOLT 180mm Angle Grinder – Bare Unit
$NZ645.00- Electronic Brake stops the wheel quickly when the trigger is disengaged
- Electronic Clutch Reduces the kick back reaction in the event of a pinch or stall
- A mesh cover over air intake vents restricts dust being sucked through the motor
- Rubber Overmould provides enhanced grip and comfort
- Safe and controllable use thanks to electronic soft start
- Recessed spindle lock design allows max depth of cut and greater protection to button when using in confined spaces
- Soft start allows gradual acceleration of speed
- 54V Brushless motor helps improve performance in demanding applications
-
DEWALT DCH133N-XJ 18V XR Brushless 26mm SDS-Plus Hammer Drill – Bare Unit
$NZ479.00- Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
- Brushless motor for improved runtime
- Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 22mm
-
DEWALT DCH333X2-XE 54V XR FLEXVOLT 30mm SDS Plus Hammer Drill – 2 X 9Ah
$NZ1,729.00- Category-leading high speed drilling performance at more than 66 holes (18mm Ø x 80mm) per charge
- Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
- Brushless motor with high capacity XR FLEXVOLT 9.0Ah 18V/54V Lithium-ion battery platform for extreme runtime and reduced maintenance
-
DEWALT DCH417NT-XJ 54V XR FLEXVOLT 32mm SDS-Plus Rotary Hammer with QCC
$NZ1,025.00- Quick release SDS-Plus toolholder and keyless chuck supplied for easy switching between hammer / rotary hammer and rotary only applications
- Category-leading high speed drilling performance at more than 74 holes (18mm Ø x 80mm) per charge
- Rotation stop mode for light chiseling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
-
DEWALT DCK2050H2T-XE 18V XR POWERSTACK Twin Kit 5Ah
Original price was: $NZ815.00.$NZ719.00Current price is: $NZ719.00.- Twin kit comprising DCD805 18V XR Compact Hammer Drill Driver and DCF850 18V XR Impact Driver
- Kitted with 2 x 5Ah POWERSTACK batteries – our most powerful, most efficient and longest lifespan battery in its class
- Battery and tool covered by 3-Year Extended Warranty, subject to registration
-
DEWALT DCK2052H1T1-XE DEWALT 18V PREMIUM POWERSTACK TWIN KIT
Original price was: $NZ959.00.$NZ839.00Current price is: $NZ839.00.DeWalt Cordless 18v/54v Flexvolt Advantage Hammer Drill and Impact Driver Kit
DeWalt’s ultra premium two piece kit, now with a 6/2Ah, 18/54v Battery and a 5Ah Powerstack battery!
Includes:
DCD999 – 18V XR with FLEXVOLT ADVANTAGE Next Generation Premium XRP Hammer Drill Driver
DCF850 – 18V XR 3 Speed Impact Driver
DCB546-XE – 18V/54V XR FLEXVOLT 6.0Ah Battery Pack
DCBP518-XJ -18V XR POWERSTACK 5.0Ah Battery Pack
DCB116-XE – Multi-Voltage Charger (6Amp Charge Rate)
TSTAK Case -
DEWALT DCK2094P2-XE 18V XR Li-Ion 2pc Combination Kit 5.0Ah
$NZ669.00- This combination kit includes the industry leading Heavy Duty DCD996 18V XRP BRUSHLESS 3 Speed Hammer Drill/Driver with 820 UWO Power featuring a 60 Lumen LED Light and all metal gearbox. DCF894 18V XR Li-Ion BRUSHLESS Mid Torque Impact Wrench with 447Nm of torque, 3 modes with Precision Wrench Control for maximum versatility across all applications, DT7508-QZ ½” Square to ¼” Hex Conversion Adapter. 2 x 5.0Ah Li-Ion Batteries, Multi-Voltage Charger, Heavy Duty T-STAK Kit Box.
-
DEWALT DCL040-XJ 18V XR Li-Ion LED Pivot Light
$NZ75.00- Flashlight includes an integrated hook for hanging & can be used free standing,
- Flashlight head pivots more than 90 degrees vertically with ratchet lock
- Improved ergonomic design and rubber grip increase comfort
DOES NOT COME WITH BATTERY SHOWN IN PICTURE
-
DEWALT DCM562PB-XE 18V XR Blower – Bare Unit
$NZ279.00- Professional performance guaranteed, with an air speed of 90 mph / 145 km/hr
- Variable trigger and speed lock allows for total power control, with the ability to lock speeds
- Professional performance with the added convenience of being battery powered
- Quiet design – for use in noise restricted areas
- Lightweight and compact design – at just 2.6 kg, the design minimizes stress to the users arm
- Comfort grip handle – ergonomically optimized handle size and position, with overmould for additional user comfort
-
DEWALT DCM849N-XJ 18V XR Brushless Rotary Polisher – Bare Unit
Original price was: $NZ449.00.$NZ429.00Current price is: $NZ429.00.- 18V Brushless Motor delivers improved performance in demanding applications
- Variable speed dial allows for easy speed changes to suit specific applications
- Variable speed trigger allows for additional speed control by adjusting the force applied to the switch
-
DEWALT DCMAS5713N-XJ 54V XR FLEXVOLT Split Boom + DCMASBC1N-XJ Brush Cutter Attachment
$NZ380.00INSTORE ONLY – NOT ABLE TO BE SHIPPED
MOTOR HEAD + BRUSH CUTTER ATTACHMENT
Get the flexibility and power needed to finish the job with the DEWALT 54V XR FLEXVOLT Split Boom. The high-efficiency brushless motor maximises runtime and product life while consistently providing the capacity to tackle tough overgrowth and withstand heavy-duty use. Easily convert into various outdoor tools with universal attachment-capability that allows you to connect additional add-ons and take on more work. Attachments available, DCMASST1N – String Trimmer, DCMASBC1N – Brush Cutter, DCMASPH6N – Pole Hedge Trimmer and DCMASPS5N – Pole Saw.
-
DEWALT DCMAS5713N-XJ 54V XR FLEXVOLT Split Boom + DCMASST1N-XJ String Trimmer Attachment
$NZ380.00INSTORE ONLY – NOT ABLE TO BE SHIPPED
MOTOR HEAD + STRING TRIMMER ATTACHMENT
Get the flexibility and power needed to finish the job with the DEWALT 54V XR FLEXVOLT Split Boom. The high-efficiency brushless motor maximises runtime and product life while consistently providing the capacity to tackle tough overgrowth and withstand heavy-duty use. Easily convert into various outdoor tools with universal attachment-capability that allows you to connect additional add-ons and take on more work. Attachments available, DCMASST1N – String Trimmer, DCMASBC1N – Brush Cutter, DCMASPH6N – Pole Hedge Trimmer and DCMASPS5N – Pole Saw.
-
DEWALT DCMHT573N-XE 54V XR FLEXVOLT Hedge Trimmer 31mm Gap – Bare Unit
$NZ459.00- 660MM BLADE LENGTH – Covers A Large Area To Tackle Large Hedges
- CUT CAPACITY UP TO 31MM – Large Cut Capacity Ideal For Tackling Tougher, Thicker Branches
- LASER CUT, DIAMOND GROUND BLADES – Sharp Hardened Blades Resist Chipping And Provide A High Quality Cut
- BRUSHLESS MOTOR – High Output Motor Delivers 3,400 SPM For High Speed Of Cut
-
DEWALT DCMPW1600N-XE 2X18V XR BRUSHLESS PRESSURE WASHER
$NZ775.00- Completely Cordless cleaning solution – No access to power or mains water required. Powered by 2 x 18V XR Batteries, Self priming functionality means water can be drawn from a bucket or water butt.
- Suitable for cleaning tools, vehicles and site clean ups.
- Brushless motor provides improved run time and durability.
-
DEWALT DCS334N-XJ 18V XR Brushless Jigsaw – Bare Unit
$NZ535.00- Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
- 4-position pendulum action controls the aggressiveness or smoothness of cuts
- Tool free adjustable shoe with anti scratch cover bevels to 45 degrees in both directions
-
DEWALT DCS335N-XJ 18V C/L JIGSAW SKIN
$NZ535.00Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
4-position pendulum action controls the aggressiveness or smoothness of cuts
Tool free adjustable shoe with anti scratch cover bevels to 45 degrees in both directions
-
DEWALT DCS356N-XJ 18V MULTI TOOL SKIN
Original price was: $NZ449.00.$NZ349.00Current price is: $NZ349.00.Bright LED light illuminates dark work surfaces for accurate cutting
DUAL-GRIP Variable Speed Trigger provides the ultimate speed and application control
Universal Accessory Adapter for use with most oscillating tool accessory brands
-
DEWALT DCS369N-XE 18V XR Brushless Sub Compact Reciprocating Saw – Bare Unit
$NZ315.00- Keyless rotating blade clamp for quick and easy blade changes
- Ergonomic handle and rubber over mould to provide ultimate end user comfort
- Improved balance and ease of handling due to central motor position
- LED light for improved visibility of cut line and work piece
- Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
- Brushless motor provides improved runtime and durability
- Sub Compact Saw allows better access to hard to reach cuts
-
DEWALT DCS369N-XJ 18V XR Brushless Sub Compact Reciprocating Saw – Tool Only
$NZ289.00- 18V XR BRUSHLESS MOTOR: Enhanced efficiency and durability.
- COMPACT AND LIGTWEIGHT: Designed for one-handed use for quick cutting jobs in tight and hard-to-reach places.
- MULTI-USE: Saws wood, metal, and plastic as well as wood composites and insulation materials.
-
DEWALT DCS389N-XJ 54V XR FLEXVOLT Reciprocating Saw – Bare Unit
$NZ585.00- 54V XR FLEXVOLT, Power of the Cord
- DEWALT Brushless Motor for power, extended run-time, reliability & durability
- Intelligent variable speed trigger and lock off switch
- Two position blade clamp allows for flush cutting and increased versability
- Lever action keyless blade clamp for tool-free blade change
- Pivoting Shoe with open top for high stability and visibility during a cut
- LED flashlight for improved visibility of the cut line
- Ergonomic handle with rubber grip for best comfort
-
DEWALT DCS438N-XJ 18V XR 76mm Cut Off Tool Skin
$NZ345.00- 18V Brushless Motor For Extended Durability, High Efficiency & Provides Class Leading Power Levels
- Best In Class 22mm Depth Of Cut For Increased Application Capacity
- Forward & Reverse Blade Direction Allows For Quick & Simple Changes In Blade Direction, Allowing User To Divert Sparks When Working In Confided Areas
-
DEWALT DCS570N-XE 18V 185MM CIRC.SAW SKIN
Original price was: $NZ450.00.$NZ375.00Current price is: $NZ375.00.Scale for precise cutting depth setting to 65 mm
General purpose ripping, cross-cutting and bevelling circular saw for wood and other construction materials
High torque Brushless motor for durability and power for cutting job site and joinery materials
-
DEWALT DCS571N-XE 18V XR Brushless 115mm Compact Circular Saw – Bare Unit
$NZ359.00- Improved ergonomic design with rubber grip over mould improving users comfort
- 24 tooth TCT tipped 115 mm diameter blade allows for efficient run-time and fast, smooth cutting/finish
- Keyless adjustment of tilt angle and cutting depth with easy-to-read scale
- Lock switch and electronic engine brake for improved handling and safety
- Spindle lock for quick and easy blade change
-
DEWALT DCS573N-XE 18V XR 184mm Circular Saw With FLEXVOLT ADVANTAGE – Bare Unit
$NZ499.00- The DEWALT brushless motor ensures longer service life, reliability and durability
- PACK ID Technology allows this tool to deliver more power when paired with an XR FLEXVOLT battery
- General purpose circular saw for sawing, cross-cutting and bevelling wood and other building materials
-
DEWALT DCS691X2-XE 54V XR FLEXVOLT 230mm Cut Off Saw Kit
$NZ1,635.00- SUPPLIED WITH 2 X 9AH BATTERIES, CHARGER
- 54V FLEXVOLT Li-Ion battery enables corded performance from a cordless tool
- Durable high power Brushless motor for the toughest applications
- Rotatable guard gives 5 position for improved visibility when cutting in tight spots
-
DEWALT DCS777N-XJ 54V XR FLEXVOLT 216mm Mitre Saw – Bare Unit
$NZ1,139.00AVAILABLE INSTORE ONLY – NOT ABLE TO BE SHIPPED
- XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity
- 54V motor provides power and runtime for demanding construction applications
- Built on classic pull saw design improved and updated for the modern user
-
DEWALT DCV100-XE 18V XR BLOWER SKIN
$NZ229.00Features
- Variable speed slider switch with variable speed trigger for improved control
- Inflator/deflator attachments for versatile applications
- Lock-on switch for ease of use
- Compact and lightweight blower for jobsite clean-up
Batteries and charger sold separately
-
DEWALT DCV501LN-XJ 18V L-Class Stick Vac Skin
$NZ249.00- 18V Motor for extended durability, efficiency and power delivering an incredible 1,260 L/Min of Airflow
- L-CLASS Compliant the only hand vac certified for use on EU jobsites, ensuring maximum user protection when in use
- HEPA Filter Captures 99.97% of particles larger Than 0.3 microns
-
DEWALT DCV584L-XE XR Li-Ion AC/DC, L Class Wet & Dry Vacuum
$NZ585.00- Operates on 14.4V / 18V and 54V FLEXVOLT XR battery packs plus runs on a 240V mains supply
- On-board hose, cord and accessory storage provides convenient transport and storage
- High efficiency washable HEPA filter traps 99.97% of dust as fine as 0.3 Microns
-
DEWALT DCW200N-XJ 18V XR BRUSHLESS 1/4 SHEET PALM SANDER – BARE UNIT
$NZ385.00Cordless technology for more user freedom
Brushless motor offering superb runtime and durability
Dust port connects directly to DEWALT‘s Airlock System forming a secure, locking connection between tool and dust extractor[cs], or std. 35mm connector
-
DEWALT DCW600N-XJ 18V XR Brushless 8mm + 1/4″ Router – Bare Unit
$NZ479.00- Aluminium motor housing can be transitioned quickly to a fixed base attachment ( not included ) increasing the versatility of the machine
- Multiple spindle lock detents enables quick and simple router bit changes
- Variable Speed Control to set optimum cutter speed for different materials
-
DEWALT DCW604N-XJ 18V XR Brushless 8mm (1/4″) Router – Bare Unit
$NZ665.00Includes
- (1) 8mm Collet (¼” GB)
- (1) 17 mm Spanner
- (1) Centering Cone
- (1) 17 mm Guide Bush
- (1) Router Body With Plunge Base
- (1) Fixed Base
- (1) Dust Extraction Fixed Base
- (1) Dust Extraction Plunge Base
- (1) Parallel Fence With Guide Rods (Plunge Base)
- (1) Basic Parallel Fence (Fixed Base)
-
DeWalt DCZ507T2-XE XR Combo Kit – 18V/54V – 5 Piece
$NZ2,249.00INSTORE ONLY – NOT ABLE TO BE SHIPPED
This XR Mixed Voltage 5 Piece Combo Kit includes DCD1007 18V XR 3 Speed Hammer Drill Driver, DCF860 18V XR 3 Speed Impact Driver, DCG418 54V XR FLEXVOLT 125mm Angle Grinder, DCS389 54V XR FLEXVOLT Reciprocating Saw, DCS578 54V XR FLEXVOLT 184mm Circular Saw, 2 x DCB546 18V/54V XR FLEXVOLT 6.0Ah Battery Pack, DCB118 18V XR 8A Fast Charger and Heavy Duty DWST1-81341 550mm Duffle Bag
-
DEWALT DT1960-QZ Construction Circular Saw Blade Stationary – Fine Finish 305mm 60T
Original price was: $NZ134.70.$NZ115.00Current price is: $NZ115.00.Specifications
Tooth DirectionClockwiseNumber of Teeth60Bore Diameter [Metric]30 mmNumber of Pieces1Application MaterialWoodKerf Thickness [Metric]3 mm -
DEWALT DT20420-QZ Circ Saw Blade Cordless Framing 115×9.5mm 24T
$NZ25.30- Extremely robust, solid construction site sheets for the toughest requirements
- Designed for rapid cutting of natural woods and composites, as well as framework
- Ideal for simples to good transverse and longitudinal cutting results
-
DEWALT DT20502-QZ Impact Modular Right Angle Attachment and Flexi Attachment
Original price was: $NZ121.60.$NZ99.00Current price is: $NZ99.00.- Long Life Gears – Provide 10x Longer Life
- 38mm Head Depth – For Ultimate accessibility
- Impact Ready – Strength to stand up to the power of today’s impact drivers
-
DEWALT DT20592-QZ 76 x 1 x 10mm INOX Bonded Abrasive Cutting Disc (3 Pack)
Original price was: $NZ20.60.$NZ18.00Current price is: $NZ18.00.Specifications
Diameter [Metric]76 mmDisc TypeFlatDisc Thickness [Metric]1.6 mmProduct Width [Metric]12.5 cmCE MarkNoSegmented Or ContinuousContinuousBonded Abrasives ApplicationCuttingProduct Height [Metric]0.5 cmBore Size [Metric]10 mmProduct Weight [Metric]0.072 KgMaterialMetalThickness [Metric]1.6 mmNumber of Pieces3 -
DEWALT DT20701-QZ Bi-Metal multi tool blade 43 x 30mm
Original price was: $NZ32.50.$NZ28.00Current price is: $NZ28.00.Product Overview
Featuring UNIVERSAL FITMENT™ for adapter-free use with all major oscillating tool brands, DEWALT Oscillating Blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.Applications
- Cuting Drywall
- Cutting PVC
- Cutting wood
- Cutting wood with nails
-
DEWALT DT20702-QZ Bi-Metal Titanium multi tool blade 55 x 44mm
Original price was: $NZ53.80.$NZ45.00Current price is: $NZ45.00.Product Overview
Featuring UNIVERSAL FITMENT™ for adapter-free use with all major oscillating tool brands, DEWALT Oscillating Blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.Applications
- Cutting drywall
- Cutting wood and metal
- Cutting PVC
- Cutting wood with nails
-
DEWALT DT20703-QZ Bi-Metal multi tool blade 67 x 30mm
Original price was: $NZ32.70.$NZ28.00Current price is: $NZ28.00.Product Overview
Featuring UNIVERSAL FITMENT™ for adapter-free use with all major oscillating tool brands, DEWALT Oscillating Blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.Applications
- Wood
- Drywall
- PVC
- Hardwood
-
DEWALT DT20704-QZ Bi-Metal multi tool blade 43 x 30mm
Original price was: $NZ25.00.$NZ21.00Current price is: $NZ21.00.Product Overview
Featuring UNIVERSAL FITMENT™ for adapter-free use with all major oscillating tool brands, DEWALT Oscillating Blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.Applications
- Drywall
- Wood
- PVC
-
DEWALT DT20707-QZ Titanium metal multi tool blade 43 x 30mm
Original price was: $NZ47.90.$NZ40.00Current price is: $NZ40.00.Product Overview
Featuring UNIVERSAL FITMENT™ for adapter-free use with all major oscillating tool brands, DEWALT Oscillating Blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.DT20707-QZTitanium metal saw blade 43 x 30mm
- Dust extraction capability, when attached to a separate dust extraction unit, to minimise dust pollution when sanding
-
DEWALT DT20713-QZ Multi-Tool Oscillating Blade 3 Piece Set
Original price was: $NZ62.50.$NZ55.00Current price is: $NZ55.00.3PC Set containing blades suitable to cut Wood + Nails
Featuring UNIVERSAL FITMENT™ for adapter-free use with all major oscillating tool brands, DEWALT Oscillating Blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.
Applications
- Cuting wood, wood with nails, drywall, and PVC.
-
DEWALT DT20715-QZ Multi-Tool Oscillating Blade 5 Piece Set
Original price was: $NZ130.40.$NZ109.00Current price is: $NZ109.00.Product Overview
Featuring UNIVERSAL FITMENT™ for adapter-free use with all major oscillating tool brands, DEWALT Oscillating Blades power through a range of cutting applications, including wood with nails. Durable enough to tackle tough jobs.Applications
- Scraping applications for the removal of sealants and adhesives.
- For cutting wood, wood and nails, dry wall, and PVC.
-
DEWALT DT40270-QZ XR EXTREME RUNTIME™ CIRCULAR SAW BLADE 190MM X 24T (DIAMOND BORE)
Original price was: $NZ46.90.$NZ39.00Current price is: $NZ39.00.- Optimized for cordless producing up to 2X more cuts per charge and ideal for DEWALT XR FLEXVOLT™ tools.
- C3 next generation grade carbide that can sustain up to 3 regrinds.
- Diamond bore 190mm blade (LHS) provides stronger mounting for use on higher toque circular saws.
-
DEWALT DT99560-QZ EXTREME Runtime Sawblades 165mm 24T
Original price was: $NZ50.40.$NZ45.00Current price is: $NZ45.00.- For use with XR FlexVolt range and all compatible corded and cordless circular saws, mitre saws and table saws
- Optimiezed for cordless with up to 2x more cuts per charge
- C3 next gen carbide with up to 3 regrinds
-
DEWALT DT99578-QZ XR EXTREME Runtime Circular Saw Blade 184mm Bore 20mm 36T
Original price was: $NZ59.80.$NZ55.00Current price is: $NZ55.00.- For use with XR FlexVolt range and all compatible corded and cordless circular saws, mitre saws and table saws
- Optimised for cordless with up to 2x more cuts per charge
- C3 next gen carbide with up to 3 regrinds
-
DEWALT DT99579-QZ XR EXTREME Runtime Circular Saw Blade 184mm Bore 20mm 60T
Original price was: $NZ68.20.$NZ59.00Current price is: $NZ59.00.- For use with XR FlexVolt range and all compatible corded and cordless circular saws, mitre saws and table saws
- Optimized for cordless with up to 2x more cuts per charge
- C3 next gen carbide with up to 3 regrinds
