Teng
-
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb
Torque wrench manufactured to DIN3122 spec. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
-
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
-
Teng 1/4in Dr. FRP Ratchet 45T DIN3122D
1400FRP – 1/4in Drive FRP Ratchet Teng Tools steel reinforced fibre ratchets have been designed to create a 45 teeth (8 degree increment) ratchet with quick release and flip reverse to meet or exceed all internationally recognised quality and torque specifications. The design protected ratchet (24583ROC) is not only lighter and just as strong but is also much more comfortable to use than regular ratchets. Bi-material handles for a more comfortable grip.
Max Torque: 62Nm Length: 150mm Weight: 96gm
All Teng Tools ratchets should be cleaned and maintained on a regular basis to reduce wear and to prolong life. However, with all tools involving moving parts some wear will occur with time. Teng Tools offer a full range of complete service kits and spare parts for their ratchets – full details available from your local Teng Tools stockist.
-
Teng 1/4in Dr. Torque Screwdriver 1-5Nm**
Torque Screwdriver
• For precision tightening of screws and bolts.
• For right hand action.
• With 1/4″ drive and adapter for 1/4″ bits.
• Suitable for e.g. fine mechanics, electronics, etc.
• Tolerance ±6%
• Supplied in plastic box.
Torque Range ISO: 1-5 Nm
Drive for Bits: 1/4 inch
-
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
Specification:
• Range – 5-25Nm (4-18 ft/lb)
• Scale – 0.4Nm (0.4 ft/lb)
• Overall Length – 277mm
• Weight – 580gm
** After use ALWAYS return torque setting to zero **
-
Teng 1/4in Long Ratchet Flexible Head 43 Teeth 200mm
Features
• 200mm long handle for added torque when needed.
• Flexible ratchet head with locking mechanism for use at different angles.
• 43 teeth giving 8 degree increments between clicks.
• Twist reverse for quickly and easily changing between tightening and loosening.
• Quick release for easier changing between different sockets and accessories.
• Bi-material grip for extra comfort.
-
Teng 1/4in Ratchet Long Arm 43 Teeth 200mm
• 200mm long handle for added torque when needed.
• 43 teeth giving 8 degree increments between clicks.
• Twist reverse for quickly and easily changing between tightening and loosening.
• Quick release for easier changing between different sockets and accessories.
• Bi-material grip for extra comfort.
-
Teng 10in / 250mm Wide Jaw Adjustable Wrench
Adjustable wrenches with an extra wide jaw opening. Chrome vanadium steel, a 15° jaw angle, ergonomically designed bi-material handle grip and phosphate finish with a graduated scale on the jaws. Exceeding international standards ISO6787-1982, ASME B.107.8-1996, BS6333-1995, DIN3117-1988, JIS B4604-1976.
• Capacity – 50mm / 2in
• Weight – 440gm
-
Teng 10in Quick Set Pliers Wrench
MB483-10 | Teng 10in Quick Set Pliers Wrench
The TengTools 10-inch quick set pliers wrench MB483-10 is a highly versatile tool tailored for professionals in fields such as automotive repair, plumbing, and general maintenance. This tool effectively eliminates the need for multiple sets of mm and inch spanners, making it a practical asset in any toolkit. Its design prevents surface damage when working with delicate, plated pipe fittings. The tool’s capabilities extend to gripping, holding, pressing, and bending. The parallel jaws are engineered for a firm and consistent grip, providing increased control and efficiency. • Eliminates the need for multiple spanner sets, offering a convenient all-in-one solution
• Ideal for damage-free work on plated fittings, preventing marring or scratching
• Versatile in function, capable of gripping, holding, pressing, and bending
• Parallel jaws design ensures a solid and consistent grip across various applications
Specification
• Capacity: 45mm
• Jaw depth: 35mm
• Tethering facility: No
• Length: 250mm (10in)
• Net weight: 422g
-
Teng 10in/250mm Iq Series Adjustable Wrench
Industrial adjustable wrenches made of chrome vanadium. Exceeding international standards ISOO6787-1982, ASME B.107.8M-1996, BS6333-1995, JISB4604-1976. The 15° jaw allows the wrench to be used in narrow areas as only 30° turning is needed. The wider jaw opening increases the range of bolt sizes that can be fitted. Non protruding on the moveable jaw end gives better access where space is limited. Black phosphate finish with graduated scale and bi-material grip handle.
• Capacity – 33mm / 1-1/4in
• ISO Norm – 320Nm
• Weight – 440gm
-
Teng 11pc Screwdriver Set – Flat | Phillips | Pozi
MD911N | Teng 11pc Screwdriver Set – Flat | Phillips | Pozi • TT-MV PLUS steel blades for added torque. • Bi-material handles for easy use with higher torque and faster speed. • Hole in the handle for hanging or for use as a T-Handle for extra torque or with a fall protection wire if needed. • Designed and manufactured to DIN5264 • Supplied in a handy carrying case.
-
Teng 11pc Screwdriver Set- Flat | Phillips | Pozi | Robinson
MD911N1 | Teng 11pc Screwdriver Set- Flat | Phillips | Pozi | Robinson • TT-MV PLUS steel blades for added torque. • Bi-material handles for easy use with higher torque and faster speed. • Hole in the handle for hanging or for use as a T-Handle for extra torque or with a fall protection wire if needed. • Designed and manufactured to DIN5264 • Supplied in a handy carrying case.
-
Teng 12in / 300mm IQ Series Adjustable Wrench
Industrial adjustable wrenches made of chrome vanadium. Exceeding international standards ISOO6787-1982, ASME B.107.8M-1996, BS6333-1995, JISB4604-1976. The 15° jaw allows the wrench to be used in narrow areas as only 30° turning is needed. The wider jaw opening increases the range of bolt sizes that can be fitted. Non protruding on the moveable jaw end gives better access where space is limited. Black phosphate finish with graduated scale and bi-material grip handle.
• Capacity – 38mm / 1-1/2in
• ISO Norm – 515Nm
• Weight – 660gm
-
Teng 12in/300mm Std Aluminium Frame Hacksaw
Complete With Hss 24T Blade701 – 12IN / 300MM Hacksaw• Professional quality Aluminium hacksaw frame with soft rubber grip.• Includes facility for pre-setting at 45° & 90° cutting angle.• Includes Swedish M2 HSS 25T blade, with storage for extra blades.Overall Length: 390mm -
Teng 200mm/8in Insulated Long Nose Plier Bent
MBV463-8 | Teng Insulated Long Nose Plier Bent 200mm
Teng Tools launches additional insulated tools specifically adapted for work on live circuits.
The circuits can be exposed to voltages up to 1000 volts. With standard tools, the technician risks getting bumps that cause serious injury or even death. To avoid this, it is important to use insulated tools when working on live wires and connections.
Teng Tools insulated VDE tools ensure ultimate protection even when used around live circuits with up to a 1000-volt potential. VDE insulated and tested according to the VDE regulations, tools for work in electrically live environments meet the requirements of the internationally acknowledged European IEC60900 standards.
Features
• Approved for live working up to 1,000 volts
• Long 45° offset jaws for easier access
• Jaws with a serrated grip for increased gripping power
• Chrome molybdenum alloy steel for durability and strength
• 80° cutting edge angle • TPR grip for a more secure and comfortable grip
• Design and manufactured to DIN5745 and IEC60900
Cutting Capacity
• Piano Wire: 1.5mm
• Hard Wire: 1.8mm
• Medium Hard Wire: 2.8mm
-
Teng 20pc 1/4in Dr. Socket Set 5.5-13mm
TJ1420 | Teng 20pc 1/4in Dr. Socket Set 5.5-13mm
• 20 piece 1/4″ drive socket set
• Includes the Teng Tools reversible mini bits ratchet
• Includes all the most commonly used sizes from 5.5 to 13mm
• Regular 6 point single hexagon sockets for a better grip
• Teng Tools hip grip design for contact with the flat side of the fastening for reduced damage and use on rounded nuts and bolts • Chrome vanadium satin finish sockets • A selection of screwdriver and TX bits is included to fit a range of fastenings
• Supplied in the unique Teng Tools TJ tray
• Clear fold up lid to see which set you need to use • Sliding catch to secure the set when not in use
• Designed and manufactured to DIN and ISO standards
• Content:
• Accessories 1/4” bits ratchet 50mm magnetic bits holder 1/4”Mx1/4”Hex adaptor
• Regular sockets 6 point 5.5, 6, 7, 8, 9, 10, 13mm
• Bits 25mm Flat 0.6 x 4.5mm, 0.8 x 5.5mm, 1.2×6.5mm, PH1, PH2, PZ1, PZ2, TX10, TX15, TX20
-
Teng 3/4in Dr. Torque Wrench 65-450Nm / 48-330ft/lb
Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
Specification:
• Range – 65-450Nm (48-330 ft/lb)
• Scale – 5.0Nm (5.0 ft/lb)
• Overall Length – 850mm
• Weight – 3.84kg
** After use ALWAYS return torque setting to zero **
-
Teng 3/8in Dr. FRP Ratchet 45T
Teng Tools steel reinforced fibre ratchets have been designed to create a 45 teeth (8 degree increment) ratchet with quick release and flip reverse to meet or exceed all internationally recognised quality and torque specifications. The design protected ratchet (24583ROC) is not only lighter and just as strong but is also much more comfortable to use than regular ratchets. New style bi-material handles for a more comfortable grip.
