ACCESSORIES
-
Alpha TCT Countersink 2.8mm
$NZ46.10Ideal for Timber Decking & Cement Sheet
• Tungsten carbide tipped pilot drill with improved chip extraction, allowing increased feed rates & shorter cycle times
• Adjustable depth stop suitable for flush mounting & deep enough to accommodate a plug
• Packaged with grub screw for replacing drill
Countersink Features:
• 90° Angle
• Three flutes
• Tungsten Carbide Tipped
-
Alpha TCT Countersink 3.0mm
$NZ50.90Ideal for Timber Decking & Cement Sheet
• Tungsten carbide tipped pilot drill with improved chip extraction, allowing increased feed rates & shorter cycle times
• Adjustable depth stop suitable for flush mounting & deep enough to accommodate a plug
• Packaged with grub screw for replacing drill
Countersink Features:
• 90° Angle
• Three flutes
• Tungsten Carbide Tipped
-
Alpha TCT Countersink 3.5mm
$NZ54.60Ideal for Timber Decking & Cement Sheet
• Tungsten carbide tipped pilot drill with improved chip extraction, allowing increased feed rates & shorter cycle times
• Adjustable depth stop suitable for flush mounting & deep enough to accommodate a plug
• Packaged with grub screw for replacing drill
Countersink Features:
• 90° Angle
• Three flutes
• Tungsten Carbide Tipped
-
Alpha Tuffbox Drill Set Gold Series Metric 1.0 – 10.0mm 19pc
Original price was: $NZ108.80.$NZ89.00Current price is: $NZ89.00.Sizes available: 1.0 – 10.0 in 0.5mm increments
• The Alpha Gold Series Drills boast the highest quality M2 HSS Jobber Drill.
• Titanium Nitride Coating increases hardness and decreases friction.
• 135º degree split point eliminates the need for centre punches or pilot drilling.
• Industrial quality.
Suitable for drilling Plastic , Wood and Metal, including Stainless Steel.
-
Alpha Tuffbox Drill Set Gold Series Metric 1.0 – 13.0mm 25pc
Original price was: $NZ209.80.$NZ179.00Current price is: $NZ179.00.• The Alpha Gold Series Drills boast the highest quality M2 HSS Jobber Drill.
• Titanium Nitride Coating increases hardness and decreases friction.
• 135º degree split point eliminates the need for centre punches or pilot drilling.
• Industrial quality.
Suitable for drilling Plastic, Wood and Metal, including Stainless Steel.
-
BOSCH 3MM MULTI CONSTRUCTION DRILL BIT
$NZ13.70EXPERT CYL-9 MULTI CONSTRUCTION DRILL BIT
FOR IMPACT DRILL/DRIVERS, FOR ROTARY DRILLS/DRIVERS
Up to 5x more precise than a Bosch CYL-3 Drill Bit
- High Precision drilling in multiple materials
- Accurate drilling is easier with Bosch Centering Geometry
- Start holes accurately with a specially designed centring tip
- Cylindrical shank compatible with three-jaw drill chucks
-
Materials
-
BOSCH 4MM MULTICONSTRUCTION DRILL BIT
$NZ13.40EXPERT CYL-9 MULTI CONSTRUCTION DRILL BIT
FOR IMPACT DRILL/DRIVERS, FOR ROTARY DRILLS/DRIVERS
Up to 5x more precise than a Bosch CYL-3 Drill Bit
- High Precision drilling in multiple materials
- Accurate drilling is easier with Bosch Centering Geometry
- Start holes accurately with a specially designed centring tip
- Cylindrical shank compatible with three-jaw drill chucks
Materials
-
BOSCH 6MM MULTICONSTRUCTION DRILL BIT
$NZ14.80EXPERT CYL-9 MULTI CONSTRUCTION DRILL BIT
FOR IMPACT DRILL/DRIVERS, FOR ROTARY DRILLS/DRIVERS
Up to 5x more precise than a Bosch CYL-3 Drill Bit
- High Precision drilling in multiple materials
- Accurate drilling is easier with Bosch Centering Geometry
- Start holes accurately with a specially designed centring tip
- Cylindrical shank compatible with three-jaw drill chucks
Materials
-
BOSCH AIZ 32 APB BLADE FOR MULTI-TOOLS
Starlock AIZ 32 APB blade guarantees exact flush and deep plunge cuts in wood, metal and plastics
- Precise cuts due to rounded cutting edge called Curved-Tec
- Sturdy Starlock mounting system increases control for highly accurate cutting
- Starlock mount for optimum power transfer and convenient blade change within 3 seconds.
-
BOSCH AIZ10AB MULTI-TOOL BLADE
Starlock AIZ 10 AB blade produces fine cuts in wood and non-hardened metal
- Narrow 10 mm cutting blade width allows for filigree work
- Sturdy mounting system reduces wobbling and enables hairline cuts
- Starlock mount for optimum power transfer and convenient blade change within 3 seconds.
-
BOSCH AIZ20AB MULTI-TOOL BLADE
Original price was: $NZ38.70.$NZ35.00Current price is: $NZ35.00.Starlock AIZ 20 AB blade produces fine cuts in wood and non-hardened metal
- Narrow 20 mm cutting blade width allows for filigree work
- Sturdy mounting system reduces wobbling and enables hairline cuts
- Starlock mount for optimum power transfer and convenient blade change within 3 seconds.
-
BOSCH EXPERT ACZ105ET Multi Material Segment Multi Tool Blade
$NZ110.70- Long Life cutting abrasive and composite materials
- Exceptional durability is built in with Bosch Carbide Technology
- Thick gauge blade offers extra robustness and stability
- Starlock mount for optimum power transfer and convenient blade change within 3 seconds
-
BOSCH T 101 D CLEAN FOR WOOD JIGSAW BLADES 5PK
$NZ20.70PACK OF 5
T 101 D Clean for Wood Jigsaw Blade delivers clean straight cuts in wood
- Precision-ground teeth with taper-ground body produce clean results
- High carbon steel material is appropriate for cutting softwood and non-abrasive woodworking materials
- Fits all T-shank jigsaws.
-
BOSCH T 118 G BASIC FOR METAL JIGSAW BLADES 5PK
$NZ13.60T 118 G Basic for Metal Jigsaw Blade makes straight cuts in metal
- Milled, wavy-set teeth are ideal for cuts without special requirements
- Fully hardened, high-grade high-speed steel blade material is appropriate for cutting non-perforated metal sheets
- Fits all T-shank jigsaws.
-
BOSCH T 123 XF PROGRESSOR FOR METAL JIGSAW BLADE
Original price was: $NZ22.60.$NZ19.00Current price is: $NZ19.00.T 123 XF Progressor for Metal Jigsaw Blade is breakproof and delivers fast straight cuts for use in thick and thin metal
- Tooth geometry has progressively increasing tooth pitch, which enables work in materials with a wide range of densities
- Milled, wavy-set teeth are designed for rapid cuts in metal sheets
- Fits all T-shank jigsaws
-
BOSCH T101A CLEAN FOR PC/PLASTIC JIGSAW BLADES 5PK
Original price was: $NZ45.70.$NZ39.00Current price is: $NZ39.00.T 101 A Clean for PC Jigsaw Blade delivers clean straight cuts in plastic
- Precision-ground teeth with taper-ground body produce clean results
- Tooth geometry designed to prevent melting when cutting polycarbonate sheets
- Fits all T-shank jigsaws.
-
BOSCH T119B BASIC FOR WOOD JIGSAW BLADES 5PK
$NZ15.40T 119 B Basic for Wood Jigsaw Blade makes straight cuts in wood
- Milled, wavy-set teeth are ideal for cuts without special requirements
- High carbon steel blade material is appropriate for cutting softwood and non-abrasive woodworking materials
- Fits all T-shank jigsaws.
-
BOSCH T127D SPECIAL FOR ALU JIGSAW BLADES 5PK
Original price was: $NZ30.50.$NZ27.00Current price is: $NZ27.00.T 127 D Special for Alu Jigsaw Blade delivers fast straight cuts in metal
- Milled, side-set tooth geometry with large, oval-shaped gullets designed for fast cuts
- Fully hardened, high-grade high-speed steel is appropriate for cutting aluminium and non-ferrous metals
- Fits all T-shank jigsaws.
-
BOSCH T313AW SPECIAL FOR SOFT MATERIAL JIGSAW BLADES 3PK
Original price was: $NZ46.90.$NZ39.00Current price is: $NZ39.00.T 313 AW Special for Soft Material Jigsaw Blade delivers clean straight cuts in special materials
- Symmetrically sharp-ground, serrated knife edge cuts most soft materials effectively with little effort.
- High carbon steel blade appropriate for cutting various non-abrasive soft materials. Not suitable for cutting synthetic insulation, wood fibre insulation and natural fibre insulation.
- Fits all T-shank jigsaws.
-
BOSCH T318A BASIC FOR METAL JIGSAW BLADES 5PK
$NZ24.70T 318 A Basic for Metal Jigsaw Blade makes cuts in metal
- Milled, wavy-set teeth are ideal for cuts without special requirements
- Fully hardened, high-grade high-speed steel blade material is appropriate for cutting pipes and closed profiles
- Fits all T-shank jigsaws.
- 132mm length of blade
-
CARBITOOL 90° Vee Groove Bit – 2 Flute – Carbide Tipped (31.3mm x 15.9mm)
Original price was: $NZ71.80.$NZ59.00Current price is: $NZ59.00.Features:
- 90° included angle
- A versatile bit for decorative vee grooves and chamfering
- Used for sign and lettering work
Specifications:
- Cutting Width (A): 31.3mm (1-15/64″)
- Flute Length (B): 15.9mm (5/8″)
- Overall Length (C): 50.8mm (2″)
- Shank: 1/4″ (6.35mm)
-
CRESCENT 38 Piece VORTEX™ alphaCASE™ Set
Original price was: $NZ102.90.$NZ85.00Current price is: $NZ85.00.The Crescent 38-piece fastening set is built for the most demanding jobsites. The stack and store alphaCASE™ features a tongue and groove design with thick sidewall construction. The 38-piece set includes a bonus Crescent patented non-marring u-GUARD covered bit holder which protect final finishes from damage, and the Crescent VORTEX™ line of torsion bits with optimized tip geometry for fit to the fastener. Screwdriving bit tips include Square, Phillips®, Torx®, Slotted. Bits are secured in pivoting insert rails inside the case, allowing easy access to bits and case configurability.
-
CRESCENT eSHOK-GUARD™ Magnetic Isolated Bit Holder 1/4″ x 3″
$NZ35.50Protect yourself from electric shock with Crescent’s new patented isolated technology, eSHOK-GUARD™, providing insulation of up to 1,000 volts. Combining safety and convenience for a revolutionary experience when working around potential live wire applications, eSHOK-GUARD’s impact-rated design withstands heavy-use, impact tool applications, so you never have to sacrifice protection when using power tools. With over 85% of professionals experiencing shocks on construction job sites, eSHOK-GUARD™ is protecting you – for life.Features
- Isolation zone insulates standard bits with protection up to 1000V
- Withstands heavy use in impact applications
- Magnetic tip keeps fasteners securely in place
-
Dart 3 Flute HSS Countersink – 6pc Set
Original price was: $NZ120.80.$NZ99.00Current price is: $NZ99.00.Precision engineered, high speed ground steel countersink bits.
This set contains, 6.3, 8.3, 10.4, 12.4, 16.5, 20.5mm bits.
Three 90 degree cutting edges for rapid swarf clearance.
Manufactured to DIN335C standards.
Suitable for use on metal, non-ferrous metals, aluminium, sheet metal, vaneered wood, laminated chipboard and PVC
