HANDTOOLS
-
CRC Paint Marker Pen Yellow
Original price was: $NZ7.70.$NZ5.50Current price is: $NZ5.50.CRC Paint Marker Pens are paint pens that use a solvent-based paint formula for durable marking on multiple surfaces in all weather conditions. It shows excellent coverage and is an ideal product for every toolbox.
-
CRESCENT 20 oz. Steel General Purpose Hammer
Original price was: $NZ102.90.$NZ65.00Current price is: $NZ65.00.Features
- Utilises vibration dampening slot technology, coupled with a vibration control handle made from proprietary materials to minimise vibration when striking by 70%
- Optimised strike face with 15% larger sweet spot to prevent miss hit and provide greater impact
-
CRESCENT 200mm/8″ Locking Sheet Metal Clamp
FEATURES- Compound action for powerful non-slip locking grip
- After initial grip is set, clamp can be tightened further by turning the adjusting screw with a hex key
- Red plastisol dip on release lever for improved comfort
- Nickel-plated finish resists rust and corrosion
- Maximum jaw opening meets ASME specifications
-
CRESCENT 22 oz Steel Milled-Face Framing Hammer
Original price was: $NZ130.20.$NZ75.00Current price is: $NZ75.00.Features
- Utilizes vibration dampening slot technology, coupled with a vibration control handle made from proprietary materials to minimize vibration when striking by 70%
- Optimized strike face with 15% larger sweet spot to prevent miss hit and provide greater impact
- Magnetic nail starter holds nails securely under the hammer head for quick and easy one hand nail starting
-
CRESCENT 3 Piece Dual Material Nail Punch Set
Original price was: $NZ37.20.$NZ29.00Current price is: $NZ29.00.eatures- Full metal core from the strike cap to the tip provides added strength when striking
- Comfort grip designed to reduce user fatigue
- Oversized strike cap for added safety
- Handle designed with parallel flats to reduce tool roll off
- Color-coded by tip size for easy identification
- Contains: 1/32″ 0.8mm, 2/32″ 1.8mm, 3/32″ 2.4mm
-
CRESCENT CPTAW8 11 Piece Pass-Thru™ X6™ Black Oxide Adjustable Wrench and Spline Socket Set
Original price was: $NZ73.50.$NZ59.00Current price is: $NZ59.00.The Crescent Pass-Thru™ Adjustable Wrench Set provides the benefits of three tools in one product. It includes a standard adjustable wrench with a maximum 1-1/8-inch jaw capacity, but the jaw on the wrench head can be easily removed and reversed, turning it into an adjustable pipe wrench with a maximum 1-inch capacity. On the opposite end, the traditional hang-hole has been transformed into a ratcheting pass-thru ratchet head that can be used with the included SAE/Metric Universal Sockets.
-
CRESCENT CTK25SO 25mm Snap Off Blade Utility Knife
$NZ28.50The Crescent 25mm Snap-Off Knife is inspired by every-day-carry (EDC) design, making it compact and comfortable to carry onto any jobsite. The 25mm Snap-Off Knife comes with 2 replacement blades with 7 points, which allows for consistent cuts throughout the blade’s lifespan.
Features -
CRESCENT CX6PT25 25 Piece 3/8″ Drive Pass-Thru™ X6™ Standard Spline Mechanics Tool Set
Original price was: $NZ96.60.$NZ79.00Current price is: $NZ79.00.The Crescent X6™ Pass-Thru™ ratchet and sockets set provides you with the innovation of the X6 design in the box end, allowing you to grip 6 different types of fasteners. Discover the convenience of pass-thru sockets that functionally replace one deep and one standard socket, and access restricted fasteners with the low-profile ratchet and socket combinations. This set includes the following sizes: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, 19mm, 3/8″, 7/16″, 1/2″, 9/16″, 5/8″, 11/16″, 3/4″, 13/16″, and 7/8″. The set also features a 3/8″ drive bit adapter socket turning the ratchet into a bit driver.
-
CRESCENT Hybrid EDC Folding Utility Knife
Original price was: $NZ54.60.$NZ49.00Current price is: $NZ49.00.Features
- Combines the ergonomics of a pocket knife with the blade-changing functionality of a utility knife.
- Resilient handle construction stands up to heavy use and tough jobsite conditions.
- A Sleek Lowpro or EDC position that keeps the knife ‘hidden’, allowing users to clip on and off belt/pocket all day long.
-
CRESCENT LUFKIN Shockforce Nite Eye™ G2 10m X 32mm Tape Measure
Original price was: $NZ81.90.$NZ69.00Current price is: $NZ69.00.Features
- Thicker protective blade coating in addition to an extra protective barrier on the first 160mm provide increased tape durability
- Wider, thicker blade that provides up to 5 metres of reach
- Matte finish, white on black markings increase the tape’s visibility in all light conditions
-
CRESCENT LUFKIN Shockforce Nite Eye™ G2 8m X 32mm Magnetic Tape Measure
Original price was: $NZ73.50.$NZ65.00Current price is: $NZ65.00.Features
- Thicker protective blade coating in addition to an extra protective barrier on the first 160mm provide increased tape durability
- Wider, thicker blade that provides up to 5 metres of reach
- Matte finish, white on black markings increase the tape’s visibility in all light conditions
-
CRESCENT LUFKIN Shockforce™ G2 10M X 32mm Tape Measure
Features
- Thicker protective blade coating in addition to an extra protective barrier on the first 160mm provide increased tape durability
- Wider, thicker blade that provides up to 5 metres of reach
- Improved end hook protects the entire front of the tape and prevents the tape from snagging and tearing
-
CRESCENT NICHOLSON CHAINSAW FILE 3/16″
$NZ12.00The Crescent Nicholson round knurl-cut chainsaw file with an American pattern. For ideal results, place file against beveled cutting surface of the teeth 20° to 45° with saw and file from the inside to the outside of cutter. Sharpen all left-hand cutters on one side of the chain and move to the other side and file all the right-hand cutters. The height between cutting teeth and depth gauge is between .020″ to .030″ — check the depth gauge height every 2 or 3 sharpening’s. Tighten the tension on chain to firmly support cutters when filing.
-
CRESCENT NICHOLSON CHAINSAW FILE 5/32″
The Crescent Nicholson round knurl-cut chainsaw file with an American pattern. For ideal results, place file against beveled cutting surface of the teeth 20° to 45° with saw and file from the inside to the outside of cutter. Sharpen all left-hand cutters on one side of the chain and move to the other side and file all the right-hand cutters. The height between cutting teeth and depth gauge is between .020″ to .030″ — check the depth gauge height every 2 or 3 sharpening’s. Tighten the tension on chain to firmly support cutters when filing.
-
Dasqua Digital Vernier Caliper Ezi-Read 0-150mm
• IP54 Waterproof protection against water, oil, dust or any other liquid.
• Auto turn-off if it is not operated after some minutes.
• Zero at any position and retains last zero setting when switched-off.
• Silky smooth movement throughout.
• Hardened, ground and lapped measuring surfaces.
• Four-way measuring for outside, inside, depth and step.
• Reliable High Precision.
• Excellent surface and stability.
• High durability and long lifetime.
• Great for industrial use.
• Strictly made in accordance with DIN862.
-
Dasqua Measuring Tool Set – 5 piece
Original price was: $NZ136.50.$NZ99.00Current price is: $NZ99.00.Dasqua Measuring Tool Set
• CNC Machined for higher accuracy and uniformity.
• Black Anodized surface for corrosion protection.
• Laser engraved marks provide greater accuracy.
Set contents:
1x Combination Square
1x Multi-Function Gauge
1x Center Square
1x Rafter Square
1x Scriber
-
DRAPER 25mm Poundthru Wood Chisel
Original price was: $NZ42.70.$NZ35.00Current price is: $NZ35.00.Full length bevel edged blades manufactured from chrome vanadium steel hardened; tempered and finely ground. Solid Impact-resistant soft grip handle allows Pound Thru striking end cap to be struck without causing damage.
-
Ehoma Bar Clamp & Spreader 305 x 95mm
Original price was: $NZ140.90.$NZ120.00Current price is: $NZ120.00.Feature
• Removable soft pads.
• Spring loaded pressure jaw.
• Cast alloy construction.
• Release mechanism for quick action.
• Head can be placed on opposite end to create a spreader
Specification
• Span x Depth: 300 x 95mm
• Spreading Capacity: 170 – 515mm
• Clamping Force: 350kg
-
ESTWING 14oz Pro Aluminium Frame Hammer
$NZ369.00The Estwing AL-Pro Framing Hammer is made from forged aircraft aluminium alloy; which is lighter than Titanium. Vibration dampening shot is built into the head giving every blow the maximum force. The PERMA-CAP steel head and interlocking steel claw give this hammer durable strength where it is most needed and the reduced claw length provides increased leverage. There is a magnetic nail starter in the head. The AL-Pro delivers power in a lighter weight package; for the best performance in a hammer with Estwings patented Shock Reduction Grip in blue.
-
ESTWING 19oz Black Ultra Hammer
Original price was: $NZ184.20.$NZ149.00Current price is: $NZ149.00.Estwing’s Ultra Series Solid Steel Hammers are engineered lighter and stronger. The sleek new profile make them lighter and aerodynamic. Estwing hammers are forged in one piece out of fine tool steel for long life and dependability. No welds. No joints that can fail. Plus; these hammers feature Estwing’s world famous and patented Shock Reduction Grip. The most durable and reliable grip put on any striking tool. Smooth Face.
Specifications
- Weight: 538.6 gram (19oz)
- Overall Length: 390.5mm
