TOOLS
-
MAKITA TD004GZ 40Vmax XGT Brushless High Torque Impact Driver Skin
$NZ409.00Specifications
Capacities 6.35mm – 1/4″ Hex – Machine screw M4-M8 – Standard bolt M5-M20 – High tensile bolt M5-M14 – Coarse thread 22-150mm Max fastening torque 230Nm Impacts per minute – Max 0-3,900ipm – Hi 0-3,600ipm – Med 0-3,100ipm – Lo 0-1,900ipm No Load Speed – Max 0-3,900rpm – Hi 0-3,000rpm – Med 0-2,100rpm – Lo 0-1,200rpm Overall dimensions 136mm Net weight (skin) 1.1kg Sound Level 100dB(A) Max power output 600W Voltage 40V -
MAKITA TM3010CX4 Multi Tool with Tool-less blade change
$NZ0.00- Highest efficiency in class: up to 20,000 oscillations per minute
- Lever style lock system allows for quick installation and replacement of accessories
- Soft start allows accurate landing of the blade on the surface of work piece
- Fully 360° multi angle setting enables users to position accessories at 12 different angles for optimum manoeuvrability
- Dust extractable
- Accepts OIS – Makita, Bosch & Fein accessories
-
MAKITA TW004GZ 40Vmax XGT Brushless ½” Impact Wrench C ring
$NZ525.00- High power in a compact design with 630Nm nut busting torque
- 40Vmax XGT battery continues to perform in continuous heavy duty application
- Optimised application selector with 6 modes adapting speed and impacts for each task
- Full speed mode shortens the distance of trigger travel required to hit full speed
- 4 Stage power selection for optimum rpm and fastening torque
-
MAKITA TW007GZ 40Vmax XGT Brushless ½” Mid-Torque Impact Wrench
$NZ545.00- High power in a compact design with 1,100Nm nut busting torque
- 40Vmax XGT battery continues to perform in continuous heavy duty application
- Optimised application selector with 6 modes adapting speed and impacts for each task
- Full speed mode shortens the distance of trigger travel required to hit full speed
- 4 Stage power selection for optimum rpm and fastening torque
-
MAKITA UC023GZ 40Vmax XGT Brushless 40cm 16″ Chainsaw skin
- High efficiency brushless motor provides power equivalent to a 35cc petrol chainsaw
- Max chain speed of 25.5m/s for fast effective cutting
- Metal bar spike for additional safety and control
- High water resistance (IPX4) for use in all seasons
- Tool-less chain adjustment for quick and efficient chainsaw maintenance
-
MAKITA VC013GLZ01 40Vmax XGT Brushless 7.5L AWS Wet & Dry Vacuum
$NZ495.00Specifications
Filter type HEPA Max sealed suction 15kPa Peak air volume 1.0 – 2.0m³/min Container volume – Dust 7.5L – Water 4.5L Sound Level – Max 75dB(A) Overall dimensions 400 x 251 x 282mm Net weight (skin) 4.3kg Voltage 40V Continuous Run-time 120mins in Low with 5.0Ah battery -
MAKITA VC2012LX1 20L Wet/Dry Dust Extraction Vacuum
$NZ535.00- Approved for L Class dust extraction
- Fitted with a new circuit breaker to protect the machine against unwanted power overload
- Easily converts from industrial wet/dry vac to dust extraction
- Powerful 21kPa max sealed suction performance
- Power tool activation for vacuum on and off
- Washable PET filter for easy maintenance
-
MAKITA VC4210MX2 42L Wet/Dry M-Class Dust Extraction Vacuum
$NZ1,435.00- Approved for dust class M of EC regulation
- Fitted with a new circuit breaker to protect the machine against unwanted power overload
- Easily converts from industrial wet/dry vac to dust extraction
- 1,200W motor with 25kPa max sealed suction performance
- Power tool activation for vacuum on and off
- PTFE Filter
-
METABO 630235000 VACUUM Start/Stop set
$NZ265.00- When starting upshutting down the cordless tool, the connected mains-powered vacuum cleaner starts/stops automatically
- Compatible with standard cordless, mains-powered tools and vacuum cleaners available on the market
- Manual starting of the vacuum cleaner is also possible with the remote button at the coupling bush of the hose
- “Vibration detection” function at the transmitter permits automatic start-up/shut-down of the vacuum cleaner by detecting vibrations
- If the vibrations are too low, the transmitter can be connected directly to to the extracting tool using the multi tape
- Multi tape to fix the transmitter to all standard hose diameters
- Start/stop cordless control replaces the function of the integrated power socket for a mains-powered tool
-
METABO AG18 18V Cordless blower skin
$NZ215.00- Lightweight cordless blower e.g. for blowing off chips from workpieces, workplace, transporter etc.
- Good ergonomics provided by a rubberised handle and an optimum centre of gravity
- Robust design suitable for applications in the workshop and on the construction site
- Vario (V)-Electronics for continuously selectable blowing air velocity rate
- Thumbwheel for preselection of 3 air velocity rate settings for varied output
- Rubberised end piece of the blow tube to protect delicate surfaces
- Comfortable blowing of floor areas using the supplied extension of the blow tube
-
METABO AK18MULTI 18V CORDLESS COMPRESSOR SKIN
$NZ299.00- Multifunctional cordless compressor, versatile use for inflating tyres, balls, air mattresses and more
- High-pressure function for comfortable inflating of car tyres and bicycle tyres
- Volume function for fast filling an deflating of inflatable products such as guest beds, air mattresses and pool accessories
- Large, high-contrast display shows selected function, current pressure and set target pressure
- The pressure can be shown in the units of bar, psi and kPa
- Automatic deactivation when the set target pressure is reached
- Bright LED light to illuminate the application area in darkness or if visibility is poor
- Operation with 18 V battery packs or alternatively via a 12V car cable
-
METABO ASR35L ACP All-purpose vacuum cleaner L CLASS
$NZ1,325.00- For extraction from the power tool in continuous mode, both on construction sites and in the workshop
- Compact vacuum cleaner for liquids and dry solids with commercial registration
- AutoClean: saves costs and time by means of automatic filter cleaning in continuous use
- If the optimum suction performance falls below a certain level, the filters are vibrated immediately
- User protection: certified in accordance with EU standard for L class dust
- Automatic shut-down when vacuuming liquids once the maximum fill level is reached
- Suction power control for adapted suction performance
- Automatic trailing mechanism for emptying the suction hose completely
- Antistatic basic equipment prevents static charge when using appropriate accessories
- Sturdy thanks to especially large wheels and castors with wheel stop
- Cable winding mechanism
- Practical accessory case and storage area
-
METABO BF18LTX90 18V CORDLESS BAND FILE SKIN
$NZ969.00- Powerful, compact cordless band file for grinding, burnishing and deburring in places difficult to reach
- Robust motor for long service life
- Tool-free change of sanding belt and adjustable belt guide
- Grinding attachment can be swivelled by 270° without tools for perfect adaptation to any working position
- Battery pack can be swivelled for better working in hard to reach places
- Detachable dust filter protects motor from coarse particles
- Overload protection: protects the motor from overheating
- Electronic soft start for smooth start-up
- Restart protection: prevents unintentional start-up after battery pack change
- Many brands, one battery pack system: This product can be combined with all 18V battery packs and chargers of the CAS brands: www.cordless-alliance-systems.com
-
METABO BSA12-18 LED2000 12/18V Cordless site light
- Compact cordless site light with COB-LED for a targeted, true colour illumination, ideal in tight spaces
- Integrated magnets for fast fixing on metal surfaces
- Swivelling hook for suspending the lamp
- Operation with all LiPOWER and LiHD slide-on 12 and 18 Volt battery packs
- Battery pack runtime at max. luminosity of 75 min per Ampere hour (Ah), e.g. 5 hours with an LiHD battery pack 18 V / 4 Ah
- Battery pack runtime at max. luminosity of 41 min per Ampere hour (Ah), e.g. 2.8 hours with an LiHD battery pack 12 V / 4 Ah
- Lamp head can be turned through 360° providing almost infinite positions for the lamp
- Stepless dimmer function for optimal light with maximum battery run time
- Clearly visible display of the remaining battery runtime, a flashing light warns before the end of the runtime to avoid dangerous situations in the dark
- Prepared for tripod use (5/8″ thread)
- Protected from dust and splash-proof for demanding building site use (IP 54)
- Rubberised stand for secure positioning and gentle contact on delicate surfaces
-
METABO CC18LTXBL 18V 76mm cutter skin
$NZ275.00- Very handy tool with maximum working comfort for many applications
- Always the right accessories: large selection of discs to process metal, wood, stone, tiles and plastic.
- Powerful brushless motor for quick work progress and highest efficiency
- Overload protection: protects the motor from overheating
- Restart protection: prevents unintentional start-up after battery pack change
-
METABO KHEV11-52BL COMBINATION HAMMER + PLASTIC CARRY CASE
$NZ2,049.00- Maximum drilling progress and high breaking performance thanks to maintenance-free brushless motor and high-performance hammer action
- Long service life thanks to brushless technology and robust aluminium die-cast housings of gear and motor
- Combination hammer with 2 functions: hammer drilling and chiselling
- Metabo VibraTech (MVT) with double dampening: Decoupled handle and impact-absorbing counter-oscillating weight actively reduce vibrations for healthy working also in continuous use.
- Ergonomically shaped, slim gripping area with large speed control trigger for comfortable working
- Easily accessible locking switch for chiselling in continuous mode
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Optional reduction of speed and impact energy for starting a drill hole or working in softer materials
- Electronic soft start for precise spot-drilling
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
- Restart protection: prevents unintentional start-up after power supply interruption
- Overload protection: protects the motor from overheating
- Low-dust chiselling and drilling with external dust extraction ESA max (accessories)
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope. -
METABO KHEV5-40BL SDS MAX Combination hammer
$NZ1,719.00- Maximum drilling progress and high breaking performance thanks to maintenance-free brushless motor and high-performance hammer action
- Long service life thanks to brushless technology and robust aluminium die-cast housings of gear and motor
- Combination hammer with 2 functions: hammer drilling and chiselling
- Metabo VibraTech (MVT) with double dampening: Decoupled handle and impact-absorbing counter-oscillating weight actively reduce vibrations for healthy working also in continuous use.
- Ergonomically shaped, slim gripping area with large speed control trigger for comfortable working
- Easily accessible locking switch for chiselling in continuous mode
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Optional reduction of speed and impact energy for starting a drill hole or working in softer materials
- Electronic soft start for precise spot-drilling
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
- Restart protection: prevents unintentional start-up after power supply interruption
- Overload protection: protects the motor from overheating
- Low-dust chiselling and drilling with external dust extraction ESA max (accessories)
-
METABO KS18LTX57BL Cordless circular saw skin
Original price was: $NZ429.00.$NZ389.00Current price is: $NZ389.00.- Powerful, light, cordless circular saw for universal use on construction sites
- Powerful Brushless motor for quick work progress and highest efficiency
- Aluminium base plate can be directly used on guide rails from Metabo and Mafell, Bosch, Festool, Makita, HiKOKI, Hilti and other manufacturers
- Fast, precise cross cuts thanks to easy coupling with a Metabo cross cutting rail
- Automatic switching on/off of the connected vacuum cleaner thanks to CordlessControl. (available as accessory)
- Fast brake stops the saw blade quickly and improves safety
- Accurately angled bevel cuts down to 50°, with handy snap-in point at 45°
- 0° position re-adjustable for highest cutting precision
- Clearly visible cutting indicator for precise sawing after initial cut
- Handle with non-slip soft-grip surface for safe guidance
- Lower weight and compact, ergonomic design
-
METABO LB18LTXBL 18V BRUSHLESS LEAF BLOWER
Original price was: $NZ409.00.$NZ370.00Current price is: $NZ370.00.- Powerful, quiet cordless blower for fast removal of leaves and dirt from squares and paths
- Strong brushless motor for high performance and long runtime per battery pack charge
- Precise dosing of the blowing force thanks to steplessly adjustable air velocity
- Constant blowing force in continuous mode thanks to steplessly lockable speed control trigger.
- Slim, well-balanced lightweight construction with rubberised grip area for low-fatigue working close to the body
- With padded shoulder strap for a healthy working position
- Robust, easy to remove blowing tube with protective metal ring
- Space-saving storage at the wall by means of practical suspension eye
- Environmentally-friendly and quiet thanks to battery operation, therefore usable also in areas sensitive to noise
-
METABO NIV18LTX BL1.6 18V CORDLESS NIBBLER SKIN
$NZ1,355.00- Handy, powerful cordless nibblers for effortless cutting of flat and shaped sheets
- Good cornering ability for notches and interior cut-outs of a radius of 40 mm or more
- Fast, tool-free adjustment of cutting direction by up to 360°, in 45° steps
- High feed rate for faster working, thanks to an efficient brushless motor
- Infinitely adjustable cutting speed for individual customisation to the given material and task at hand
- Distortion- and spark-free cutting, without the annoyance of metal dust
- Comfortable handling thanks to low weight, slim grip area and switch located on the top
- Metabo Quick: tool-free quick changing of dies and punches
- Electronic overload protection for long service life
- With chip collection bag to protect against contact corrosion from ejected chips
- Many brands, one battery pack system: This product can be combined with all 18V battery packs and chargers of the CAS brands: www.cordless-alliance-systems.com
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope. -
METABO SGS18LTXQ 18V Cordless shrub and grass shears
$NZ235.00- 2 in 1: Shrub shears for precise form cuts on shrubs and grass shears for clean lawn edges
- Metabo quick system: tool-free quick change of the two blade attachments for fast working
- Best cutting results thanks to laser-cut, diamond-ground blades
- High user safety thanks to safety switch and blade quick stop
- Lightweight with maximum smooth running for low-fatigue working whilst protecting the user’s health
- Slim, rubberised grip area for comfortable and safe guiding of the shrub and grass shears
- Stable telescopic rod for precise cutting of lawn edges whilst being gentle on the back. This rod is available as an accessory.
-
METABO SSW18LTX1750BL 18V 3/4″ Cordless impact wrench skin
$NZ795.00- Extremely powerful cordless impact driver with 3/4″ male square and 1750 Nm
- Unique Metabo brushless motor for quick work progress and highest efficiency for any application
- Loosening in APS mode (automatic power shift): prevents falling of the screw/nut with automatic speed reduction after loosening
- Overload protection: protects the motor from overheating
- Very powerful for demanding applications
- Low kick-back operation with extremely high torque
- Twelve speed/torque levels for a wide range of applications
- Integrated work light for illumination of the work area
- Robust die cast aluminium gear housing for optimum heat dissipation and durability
-
METABO SSW18LTX300BL 18V Cordless impact wrench skin
- Compact cordless impact driver with 1/2″ male square and 300 Nm, versatile application
- Unique Metabo brushless motor for quick work progress and highest efficiency for any application
- Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent overtightening.
- Low kick-back operation with extremely high torque
- Twelve speed/torque levels for a wide range of applications
- Integrated work light for illumination of the work area
- Robust die cast aluminium gear housing for optimum heat dissipation and durability
- Handy belt hook, can be fixed either on the right or left side
-
METABO SSW18LTX400BL 18V 1/2″ Cordless impact wrench skin
$NZ525.00- Unique Metabo brushless motor for quick work progress and highest efficiency for any application
- Overload protection: protects the motor from overheating
- High torque accompanied by an exceptionally compact design
- Low kick-back operation with extremely high torque
- Twelve speed/torque levels for a wide range of applications
- Integrated work light for illumination of the work area
- Robust die cast aluminium gear housing for optimum heat dissipation and durability
- Handy belt hook, can be fixed either on the right or left side
-
METABO W11-125 Quick 125mm Angle grinder
Original price was: $NZ239.00.$NZ215.00Current price is: $NZ215.00.- Low fatigue as never before: compact angle grinder with smallest handle circumference in its class for perfect ergonomics
- Longer service life, more power: the Metabo Marathon-motor with patented dust protection, up to 20% more overload capacity and 50% more torque
- Tool free, fast disc change at the touch of a button with the Metabo M-Quick-System
- Tool-free adjustable guard; twist-proof
- Metabo S-automatic mechanical safety clutch: minimises kick-back to the lowest level when the disc jams unexpectedly – for maximum user safety and swift progress
- Gear housing can be unscrewed, rotated in 90° steps and remounted for left-handed operation or cutting
- Auto-stop carbon brushes to protect the motor
-
METABO W24-230MVT ANGLE GRINDER
$NZ505.00- Metabo Marathon motor with patented dust protection for long service life
- Deadman’s switch for high user protection
- Rotating back handle and side handle can be mounted at 3 positions for optimum handle position also when cutting
- Tool-free adjustable guard; twist-proof
- Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user’s health
- Metabo safety switch prevents unintentional start
- Auto-stop carbon brushes to protect the motor
-
METABO WE24-180MVT 180mm Angle grinder
$NZ485.00- Metabo Marathon motor with patented dust protection for long service life
- Electronic safety shutdown: reduces kickback if the disc stops unexpectedly – for high user safety
- Rotating back handle and side handle can be mounted at 3 positions for optimum handle position also when cutting
- Tool-free adjustable guard; twist-proof
- Starting current limitation prevents the actuation of the lock on start-up
- Electronic overload protection and restart protection
- Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user’s health
- Metabo safety switch prevents unintentional start
- Auto-stop carbon brushes to protect the motor
- LED signal indicates triggered restart protection or overheating
-
METABO WE24-230 VT Quick 230mm Angle grinder
$NZ565.00- Metabo Marathon motor with patented dust protection for long service life
- Electronic safety shutdown: reduces kickback if the disc stops unexpectedly – for high user safety
- Deadman’s switch for high user protection
- Rotating back handle and side handle can be mounted at 3 positions for optimum handle position also when cutting
- Metabo Quick for tool-free disc change by means of a quick-locking nut
- Tool-free adjustable guard; twist-proof
- Starting current limitation prevents the actuation of the lock on start-up
- Electronic overload protection and restart protection
- Metabo VibraTech (MVT): integrated damping system and side handle to reduce vibrations in order to protect the user’s health
- Metabo safety switch prevents unintentional start
- Auto-stop carbon brushes to protect the motor
- LED signal indicates triggered restart protection or overheating
-
METABO WEQ1400-125 125MM ANGLE GRINDER
Original price was: $NZ309.00.$NZ289.00Current price is: $NZ289.00.- Robust, universal and economical: ergonomic angle grinder for any application
- Powerful motor with good overload capacity
- Tacho Constamatic (TC) Full-wave Electronics: fast work progress by means of constant speed under load
- Tool free, fast disc change at the touch of a button with the Metabo M-Quick-System
- Metabo S-automatic mechanical safety clutch: minimises kick-back to the lowest level when the disc jams unexpectedly – for maximum user safety and swift progress
- Electronic overload protection for long service life
- Electronic soft start and restart protection
- Gear housing can be unscrewed, rotated in 90° steps and remounted for left-handed operation or cutting
-
METABO WEV17-125 Quick Inox 125mm Angle grinder
Original price was: $NZ499.00.$NZ459.00Current price is: $NZ459.00.- Perfect processing of stainless steel: robust, powerful angle grinder with high gear reduction and adjustable reduced speed for cool finish
- Longer service life, more power: the Metabo Marathon-motor with patented dust protection, up to 20% more overload capacity and 50% more torque
- Vario Tacho Constamatic (VTC) Full-wave Electronics with Thumbwheel: for working at customised speeds to suit the application material and speeds that remain almost constant, even under load
- Tool free, fast disc change at the touch of a button with the Metabo M-Quick-System
- Tool-free adjustable guard; twist-proof
- Low-vibration side handle Metabo VibraTech (MVT)
- Metabo S-automatic mechanical safety clutch: minimises kick-back to the lowest level when the disc jams unexpectedly – for maximum user safety and swift progress
- Electronic overload protection, soft start and restart protection
- Gear housing can be unscrewed, rotated in 90° steps and remounted for left-handed operation or cutting
- Auto-stop carbon brushes to protect the motor
-
METABO WEV19-125 Q M-BRUSH ANGLE GRINDER
Original price was: $NZ815.00.$NZ745.00Current price is: $NZ745.00.- With powerful 1,900 Watt and M-brush technology equipped for industrial use
- Metabo M-brush technology: service-free carbon brushes with triple service life for an entire machine life
- Longer service life, more power: the Metabo Marathon-motor with patented dust protection, up to 20% more overload capacity and 50% more torque
- Vario Tacho Constamatic (VTC) Full-wave Electronics with Thumbwheel: for working at customised speeds to suit the application material and speeds that remain almost constant, even under load
- Tool free, fast disc change at the touch of a button with the Metabo M-Quick-System
- Tool-free adjustable guard; twist-proof
- Low-vibration side handle Metabo VibraTech (MVT)
- Metabo S-automatic mechanical safety clutch: minimises kick-back to the lowest level when the disc jams unexpectedly – for maximum user safety and swift progress
- Electronic overload protection, soft start and restart protection
- Gear housing can be unscrewed, rotated in 90° steps and remounted for left-handed operation or cutting
-
MILWAKEE M18DSAL-0 Dual Power Tower Light (Tool Only)
The Brighter, Tougher, Taller Stand Light – M18 Dual Power Tower Light is designed to give professionals an area lighting solution that adapts, performs, and survives industrial use unlike any other portable work light. The M18DSAL-0 can be setup in seconds with its max extension 2.1m high, and it collapses down to 1.2m for easy transport and storage. The light head can be extended from 1.2-2.1m to light overhead work or minimise shadows when casting light downward. Capable of filling large areas with light, it provides 2,500 lumens of high definition light output for in its high mode, 1,100 in medium and 700 in low, and it can run for up to 7, 14, or 22 hours with an M18 REDLITHIUM-ION 9.0 Battery Pack. It uses high quality LEDs with a neutral white color and a high color rendering index paired with a MILWAUKEE designed reflector to produce an even beam pattern. Its reinforced legs are impact resistant, and its low center of gravity provides a stable base. The light head is protected by an impact-resistant lens and bezel, and it nests into a protective shroud for secure transport and storage. Its LEDs never need to be replaced, and are backed by a limited lifetime warranty. The light also has an AC inlet for dual powered options, so that regardless where you are on the jobsite you will always be able to light the jobsite. The combination of these technologies offers professionals the highest quality LED lighting solution, on or off the jobsite.
-
MILWAUKEE 1,400MM GUIDE RAIL
Original price was: $NZ204.00.$NZ159.00Current price is: $NZ159.00.The Milwaukee® guide rail is designed to deliver precise straight cuts for the professional carpenter and remodeler. Compatible with the MILWAUKEE® 165mm Track Saw (M18FPS55-0) the guide rail features anti-slip strips to keep the track from moving during cuts and an anti-splinter edge strip to help make splinter-free, finish quality cuts. The guide rail is also compatible with the Milwaukee® rail clamps, rail connectors, and track bag.
-
MILWAUKEE 1/2″ ROUTER TRACK ADAPTER
Original price was: $NZ238.00.$NZ195.00Current price is: $NZ195.00.The MILWAUKEE® 1/2″ Router Track Adapter delivers portable precision and enhanced versatility for the Milwaukee® M18 FUEL™ Laminate Trimmer (M18 FTR) and the M18 FUEL™ 1/2” Router (M18 FR12). The Track Adapter is compatible with Milwaukee® Guide Rails and allows for laser-straight cuts on the jobsite or in the shop. The durable aluminium construction, cam lock system, and anti-tilt feet deliver smooth, consistent passes across the guide rails. The adapter also features an adjustable depth of 50.8mm (2”), a depth scale with markings in inches and millimetres, and included gauge block that increases accuracy and reduces set-up time.
