light
-
Alpha TCT Countersink 3.0mm
$50.90Ideal for Timber Decking & Cement Sheet
• Tungsten carbide tipped pilot drill with improved chip extraction, allowing increased feed rates & shorter cycle times
• Adjustable depth stop suitable for flush mounting & deep enough to accommodate a plug
• Packaged with grub screw for replacing drill
Countersink Features:
• 90° Angle
• Three flutes
• Tungsten Carbide Tipped
-
Alpha Tuffbox Drill Set Gold Series Metric 1.0 – 10.0mm 19pc
Original price was: $108.80.$89.00Current price is: $89.00.Sizes available: 1.0 – 10.0 in 0.5mm increments
• The Alpha Gold Series Drills boast the highest quality M2 HSS Jobber Drill.
• Titanium Nitride Coating increases hardness and decreases friction.
• 135º degree split point eliminates the need for centre punches or pilot drilling.
• Industrial quality.
Suitable for drilling Plastic , Wood and Metal, including Stainless Steel.
-
Alpha Tuffbox Drill Set Gold Series Metric 1.0 – 13.0mm 25pc
Original price was: $209.80.$179.00Current price is: $179.00.• The Alpha Gold Series Drills boast the highest quality M2 HSS Jobber Drill.
• Titanium Nitride Coating increases hardness and decreases friction.
• 135º degree split point eliminates the need for centre punches or pilot drilling.
• Industrial quality.
Suitable for drilling Plastic, Wood and Metal, including Stainless Steel.
-
BOSCH GAS 18V-1 PROFESSIONAL CORDLESS VACUUM CLEANER SKIN
$159.00Compact handheld 18 V dry vacuum cleaner makes short work of rough dirt
- Ideal handling: compactness, manoeuverability, cordless freedom, and quick and easy emptying of the dust container
- Large number of accessories enables flexibility in a wide range of cleaning jobs
- Mobility and easy transport: conveniently fits into an L-BOXX
-
BOSCH GBL18V-750 PROFESSIONAL BLOWER BARE TOOL
$475.00High-performance garden clearing with full control and great ergonomics
- Powerful – BITURBO technology, brushless motor and axial fan deliver volumetric flow of 780 m³/h and air speed of up to 198 km/h
- Full control – Variable speed control allows selection of optimal power, noise level, and runtime depending on your task
- Ergonomic design – Effortless working thanks to a lightweight and well-balanced design
-
BOSCH GBM 13-2 RE Professional Elec Drill
$509.002-geared rotary drill for precision work
- Powerful 750 W motor and high torque for fast work progress, drilling holes in steel of up to 13 mm in diameter
- Compact and ergonomic design providing good tool handling for precise results
- 2-speed gearbox with speed preselection setting wheel for accurate performance in versatile applications
-
BOSCH GCG18V-600 PROFESSIONAL CORDLESS CAULK GUN SKIN
$645.00Bosch’s 1st Cordless Caulk Gun: 100% compatible with all Bosch Professional 18 V batteries
- Easy control of material flow: Speed selection with 9 speed settings and variable speed trigger
- Fast working progress even with high viscosity adhesives: 3.5 kN push force combined with a maximum (no load) feed of 7 mm/sec
- No dripping or material overflow: Plunger rod auto-reverse function relieves pressure when trigger is released
-
BOSCH GGS 8 SH Professional Straight Grinder
$1,019.00Most powerful tool with quick-locking nut in Bosch’s straight grinders category
- Strong 1,200 W motor ensures fast work progress with high material removal rate
- Grinder´s SDS quick-locking nut makes rapid tool-free accessory changing possible
- Restart protection functionality increases user protection during operation
-
BOSCH GKM18V-LI PROFESSIONAL CORDLESS METAL CUT SAW SKIN
$295.00Quick, precise cutting of metal – virtually spark-free
- Precise results and little need for refinishing due to minimal discolouration and low burr formation thanks to optimised speed for metal applications
- Virtually spark-free for a safe work environment
- Compact design and low weight for low user fatigue
-
BOSCH GKS 18V-68 C PROFESSIONAL CORDLESS CIRCULAR SAW SKIN -BITURBO
$429.00Cordless flexibility with corded power – for high performance
- Maximum cordless cutting performance, fully equal to corded 1,800 W due to new BITURBO Brushless technology
- Outstanding ergonomics, due to a new auxiliary handle concept which ensures perfect control in all cutting positions
- Best cutting capacity in class with up to 70 mm cutting depth in 90° cuts.
-
BOSCH GKS190 PROFESSIONAL HAND-HELD CIRCULAR SAW
Original price was: $259.00.$225.00Current price is: $225.00.The powerful and durable circular saw for cuts up to 70 mm
- Powerful 1,400 W motor saws wood to a depth of 70 mm
- Compact design allows easy handling and operation
- Robust design for tough sawing applications
-
BOSCH GKT 18V-52 GC PROFESSIONAL CORDLESS PLUNGE SAW SKIN – BITURBO
$915.00Corded performance and superior compactness in the Bosch 18 V category
- BITURBO Brushless technology and ProCORE18V for maximum cordless cutting performance equal to corded 1,620 W plunge saws
- Superior mobility due to a uniquely compact design allowing operation with only one battery
- Very compact design enables minimum distance between saw blade and wall of only 10 mm
-
BOSCH GLI18V-10000C 18V Professional Cordless Jobsite Light
$585.00Bosch’s first floodlight with 10,000 lumens in the 18 V category
- Brighter than 500 W halogen floodlights – superior LED capable of producing up to an impressive 10,000 lumens
- Extremely robust via solid metal body shielded with shock-absorbing rubber frame and heavy-duty safety bars
- User Interface with brightness indication/charge level indicator; Bluetooth for remote control and lighting adjustments via app
-
BOSCH GLL2-80P Professional Line Laser
Original price was: $449.00.$375.00Current price is: $375.00.Levelling in 360° – Faster and easier than ever
- High work efficiency: simultaneous performance of horizontal and vertical levelling applications in the entire room with only one tool
- Large working range: precise work in a diameter of up to 80 m using the LR 2 Professional Receiver
- Easy handling: self-levelling up to 4° within 4 seconds, compact design
-
BOSCH GNH18V-64 PROFESSIONAL CORDLESS ANG. BRADDER 16G
$669.00Quick and precise fastening: finish nailer with single firing mode
- No compressor, air hose or additional gas cartridge is needed – for maximum freedom
- Blank firing with empty nail magazine is prevented by the dry-fire lockout function
- Highest accuracy through precise modification of countersink depth
-
BOSCH GOP18V-28 Professional Cordless Multi-Cutter in L-boxx 136
$525.00The versatile power performer in the Bosch StarlockPlus category
- Superior Starlock interface of optimised 3-dimensional tight connection for highest direct power transfer
- LED spot illuminates workspaces, improving work visibility even in the dark
- Snap-in function enables fast and easy tool accessory change
-
BOSCH GPB18V-2C PROFESSIONAL RADIO
$249.00Flexible and handy: portable radio that rocks every jobsite
- Versatility thanks to wide range of compatible sources, including Bluetooth®, FM, and AUX
- Features intuitive operation and quick setup in combination with a handle and hook for vertical and horizontal placement
- Unique stereo sound due to the possibility to couple two radios with one smartphone
-
BOSCH GPB18V-2SC PROFESSIONAL RADIO
$299.00Great sound to carry around: flexible and portable digital jobsite radio
- Extreme flexibility for pleasant working: sourcing from DAB+, Bluetooth®, FM, and AUX
- Features intuitive operation and quick setup in combination with a handle and hook for vertical and horizontal placement
- Unique stereo sound due to the possibility to couple two radios with one smartphone
-
BOSCH GPL 5 G PROFESSIONAL POINT LASER
$555.00- Green laser points provide up to four times better visibility than red points
- Durable design resists tough conditions: rubberised housing with recessed glasses, IP65 dust and water jets protection
- Fast and secure mounting thanks to integrated rotation mount with strong magnets
-
BOSCH GSA18V-LI PROFESSIONAL CORDLESS RECIPROCATING SAW SKIN
$339.0018V-reciprocating saw with strong cutting performance and long runtime
- Battery´s long runtime enables over 100 cuts into spruce beams of up to 100 x 100 mm for fast work progress
- Electronic Motor Protection provides a long lifetime
- Tool-free Bosch SDS system makes changing saw blades fast and easy
NO BATTERY SUPPLIED- TOOL ONLY
-
CRESCENT 20 Oz. Hatchet with Fiberglass Handle
Original price was: $101.30.$85.00Current price is: $85.00.FEATURES- Precision ground blade with optimal cutting angle splits wood with ease
- Wrap around head and neck prevents the hatchet from separating from the handle
- Textured fawns foot grip give users an ergonomically sound and sure grip
- Rear striking face for driving stakes, nails and demolition work
- Heavy duty, oversized protective sleeve prevents damage due to overstrike
-
DEWALT 18V XR CORDLESS PLANER BARE UNIT
$585.00- Powerful brushless motor provides smooth planing performance combined with extended runtime
- Lightweight, compact and ergonomic design for comfortable use in all orientations
- Large twin blade drum with TCT blades for high quality surface finish
- On-board blade storage and Torx key enable fast blade change and minimise downtime
- Large front and rear shoe for improved stability
- Compatible with AirLock dust extraction system
STANDARD
- Tungsten carbide tipped reversible blades
- Hex wrench
- Torx key
- Guide fence
- Batteries and charger sold separately
- Blade alignment plate
-
DEWALT 18V XR HEAT GUN – BARE UNIT
$289.00- DCE530 XR Heat Gun reaches a temperature of 530°C on a high setting and 290°C on a low setting
- Select a high or low temperature setting with the 2-set temperature selector, optimising temperature for specific applications
- Keep the tool switched on using the lock-on button to improve comfort for longer applications and hands-free use
- The trigger with a built in lock-off switch prevents an accidental start up during transportation and storage, reducing risk of thermal accidents
- A built-in LED light illuminates the work place and improves visibility in small, confined spaces
- Fully compatible with all DEWALT 18V XR batteries
STANDARD
- DCE530 Cordless Heat Gun
- Reflector Nozzle
- Surface Nozzle
-
DEWALT DCB184-XE 18V 5.0AH BATTERY
$215.00The new DEWALT 5.0Ah XR Li-Ion battery packs will deliver 66% more runtime than a standard 3.0Ah battery pack
LED State of Charge Indicator helps manage pack charging
Lightweight design provides the user with upgraded 5Ah Power without increasing the size or weight over the 18V 3Ah battery pack
-
DEWALT DCC018N-XJ 18V XR INFLATOR
$289.00- Compact, lightweight, high-performance inflator and deflator with an LED light allows use at night or in low-light conditions
- High pressure hose quickly inflates items such as tyres (size 235/70R17) inflated in 400 seconds
- Output of 0.35l/min@6.2 bar and 0.6l/min@2 bar for quick inflation
-
DEWALT DCD1007WW1T-XE 18V XR Brushless Premium Hammer Drill Driver – 1 X 8Ah
$799.00Dewalt’s most powerful 18V XR Hammer Drill Driver uses a DEWALT XR Brushless motor to deliver 169Nm of torque in a 193mm body, engineered to give you faster application speeds on the toughest jobsites. Pack ID Technology allows this tool to deliver more power when paired with an 18V XR POWERSTACK or XR FLEXVOLT battery. 3 speed and 11 torque settings give you the ultimate control over drilling and fastening applications. The Anti-Rotation system detects bind-ups and shuts down the tool helping to protect you. An enhanced pivoting 70 lumen LED positioned on the foot offers greater visibility in dark and confined spaces.
-
DEWALT DCD740N-XE 18V XR Right Angle Drill – Bare Unit
$440.00- Ergonomic handle and rubber over mould to provide ultimate end user comfort
- Multi voltage charger for use with 18V, 14.4V and 10.8V XR Li-Ion slide pack batteries
- Steel belt clip and tough magnetic bit holder ensures strong storage solutions
-
DEWALT DCD999N-XE 18V XR XRP Hammer Drill Driver With FLEXVOLT ADVANTAGE – Bare Unit
$555.00- FLEXVOLT ADVTANGE tool technology: the tool uses intelligent electornics to sense what battery is in the tool and increase power and torque when using FLEXVOLT batteries
- 51% more power when using DCB547 XR FLEXVOLT 9Ah battery compared with DCB184 18V XR 5Ah battery
- 42% more power when using DCB546 XR FLEXVOLT 6Ah battery compared with DCB184 18V XR 5Ah battery
-
DEWALT DCE0822D1G-XE 12V XR 2 Spot Cross Line Green Laser – 1 X 2Ah
$699.00- 12V rechargeable battery platform – For extra long time and the convenience of rechargeable batteries
- Projects a full cross line (horizontal & vertical) + 2 independent spot points allows multi-use tool
- Cross line function feature a 150 degree fan angle which provides ample coverage with little set-up time
-
DEWALT DCE089D1G 12V XR 3 X 360 CROSS LINE GREEN LASER KIT
$910.00OVERVIEW
- x3 360°Self Leveling Lines
- Projects bright horizontal and vertical lines.
- Variable blink sequence for manual mode.
- Working range : 30M (60M w/ detector)
- Accuracy : +/-3mm@10m
- Full-time pulse mode allows use with detector maintians full brightness for visibility
- 12V battery pack included
- Upgradable battery for extended life, fast change time, less down time
- Locking Pendulum to help prevent damage to internal components
- Integrated Magnetic Pivoting Base with ¼” Thread
- Wear resistant – overmold : IP65 / 2m drop tested
-
DEWALT DCF403NT-XJ 18V XR Brushless 4.8mm Rivet Tool – Bare Unit
$625.00- 18V XR Brushless, Cordless Rivet Gun that delivers fast and easy riveting performance
- Fasten all bilnd rivets from 2.4 mm , 3.2 mm , 4.0 mm and 4.8 mm to offer bigger range of application
- 10,000 N of pulling force and 25mm Stroke will give you a power to complete the application in one go and increase the performance on the job site
-
DEWALT DCF414NT-XJ 18V XR Brushless 6.3mm Rivet Tool – Bare Unit
$915.00- 18V XR Brushless, Cordless Rivet Gun that delivers fast and easy riveting performance
- Fasten all blind rivet from 4.8 mm , 6.0 mm and 6.4 mm to offer bigger range of application
- 20,000 N of pulling force and 30mm Stroke will give you a power to complete the application in one go and increase the performance on the job site
-
DEWALT DCF620KN-XE 18V C/L COLLATED SCREW DRIVER
$479.0018V XR Li-Ion BRUSHLESS Drywall Screwdriver for efficient fitting of drywall
Powerful 4400rpm BRUSHLESS motor drives screws efficiently and effectively offering maximum runtime and a compact tool
One of the lightest and most compact tools on the market – it ensures that you can work comfortably and get into small spaces
-
DEWALT DCF894N-XJ 18V XR Brushless Compact High Torque 1/2″ Impact Wrench – Bare Unit
Original price was: $469.00.$299.00Current price is: $299.00.- All-new 18V BRUSHLESS XR Compact High-Torque Wrench featuring Precision Wrench™
- Powerful fan cooled motor delivers up to 447Nm of torque and 3100 impacts per minute for heavy duty fastening applications
- At just 178mm long and weighing only 1.5kg, the tool retains power whilst being compact enough to get into tight spaces
-
DEWALT DCF900N-XJ 18V XR Brushless 1/2″ Hog Ring High Torque Impact Wrench – Bare Unit
$575.00- 1/2” square drive with hog ring allows quick socket changes
- Variable trigger allows complete control over all applications
- Efficient brushless motor delivers high performance, extends tool life and allows for much shorter design
-
DEWALT DCG200NT-XJ 54V XR FLEXVOLT WALL CHASER – BARE UNIT
Original price was: $915.00.$799.00Current price is: $799.00.- 54V Brushless motor enables improved performance in demanding applications
- Electronic Brake stops the wheel quickly when the trigger is disengaged
- Electronic Clutch reduces the kickback reaction in the event of a pinch or stall
-
DEWALT DCG406N-XJ 18V XR Brushless 125mm Angle Grinder Skin
$450.00Features
- 18V Brushless Motor
- Electronic Brake stops the wheel quickly when the trigger is released
- Electronic Clutch reduces the kickback reaction in the event of a pinch or stall
- Mesh Covers restricts dust being sucked through the motor
- Rubber Overmould provides enhanced grip and comfort
- Two position side handle offers greater comfort and control
Includes
- (1) 2 position side handle
- (1) Keyless protective guard
- (1) Blade wrench
Specifications
SUPPLIED IN KITBOXNONO LOAD SPEED (RPM)9000BRAKEYESPRODUCT WEIGHT [METRIC]1.75 KGPRODUCT HEIGHT [IMPERIAL]14 INPOWER SOURCECORDLESSPRODUCT LENGTH [METRIC]310 MMPRODUCT WEIGHT [IMPERIAL]9 LBS -
DEWALT DCG416N-XE 18V XR 125mm Angle Grinder With FLEXVOLT ADVANTAGE – Bare Unit
$499.00- PACK ID Technology allows this tool to deliver more power when paired with an XR FLEXVOLT battery
- The brushless motor ensures longer operating time and durability
- The electronic brake stops the disc quickly when the shutter-release button is released
-
DEWALT DCG416VSN-XJ 18V XR 125mm Variable Speed Angle Grinder – Bare Unit
$499.00- Brushless motor technology delivers improved power efficiency and longer runtime for extended life
- Variable speed gives ultimate control for a wider range of applications
- Electronic brake stops the wheel quickly when the trigger is released
-
DEWALT DCG440N-XJ 54V XR FLEXVOLT 180mm Angle Grinder – Bare Unit
Original price was: $675.00.$619.00Current price is: $619.00.- Electronic Brake stops the wheel quickly when the trigger is disengaged
- Electronic Clutch Reduces the kick back reaction in the event of a pinch or stall
- A mesh cover over air intake vents restricts dust being sucked through the motor
- Rubber Overmould provides enhanced grip and comfort
- Safe and controllable use thanks to electronic soft start
- Recessed spindle lock design allows max depth of cut and greater protection to button when using in confined spaces
- Soft start allows gradual acceleration of speed
- 54V Brushless motor helps improve performance in demanding applications
-
DEWALT DCH133N-XJ 18V XR Brushless 26mm SDS-Plus Hammer Drill – Bare Unit
$479.00- Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
- Brushless motor for improved runtime
- Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 22mm
-
DEWALT DCH333X2-XE 54V XR FLEXVOLT 30mm SDS Plus Hammer Drill – 2 X 9Ah
$1,729.00- Category-leading high speed drilling performance at more than 66 holes (18mm Ø x 80mm) per charge
- Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
- Brushless motor with high capacity XR FLEXVOLT 9.0Ah 18V/54V Lithium-ion battery platform for extreme runtime and reduced maintenance
-
DEWALT DCH417NT-XJ 54V XR FLEXVOLT 32mm SDS-Plus Rotary Hammer with QCC
$1,025.00- Quick release SDS-Plus toolholder and keyless chuck supplied for easy switching between hammer / rotary hammer and rotary only applications
- Category-leading high speed drilling performance at more than 74 holes (18mm Ø x 80mm) per charge
- Rotation stop mode for light chiseling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
-
DEWALT DCK2050H2T-XE 18V XR POWERSTACK Twin Kit 5Ah
Original price was: $815.00.$719.00Current price is: $719.00.- Twin kit comprising DCD805 18V XR Compact Hammer Drill Driver and DCF850 18V XR Impact Driver
- Kitted with 2 x 5Ah POWERSTACK batteries – our most powerful, most efficient and longest lifespan battery in its class
- Battery and tool covered by 3-Year Extended Warranty, subject to registration
-
DEWALT DCK2052H1T1-XE DEWALT 18V PREMIUM POWERSTACK TWIN KIT
Original price was: $959.00.$839.00Current price is: $839.00.DeWalt Cordless 18v/54v Flexvolt Advantage Hammer Drill and Impact Driver Kit
DeWalt’s ultra premium two piece kit, now with a 6/2Ah, 18/54v Battery and a 5Ah Powerstack battery!
Includes:
DCD999 – 18V XR with FLEXVOLT ADVANTAGE Next Generation Premium XRP Hammer Drill Driver
DCF850 – 18V XR 3 Speed Impact Driver
DCB546-XE – 18V/54V XR FLEXVOLT 6.0Ah Battery Pack
DCBP518-XJ -18V XR POWERSTACK 5.0Ah Battery Pack
DCB116-XE – Multi-Voltage Charger (6Amp Charge Rate)
TSTAK Case -
DEWALT DCK2094P2-XE 18V XR Li-Ion 2pc Combination Kit 5.0Ah
Original price was: $725.00.$635.00Current price is: $635.00.- This combination kit includes the industry leading Heavy Duty DCD996 18V XRP BRUSHLESS 3 Speed Hammer Drill/Driver with 820 UWO Power featuring a 60 Lumen LED Light and all metal gearbox. DCF894 18V XR Li-Ion BRUSHLESS Mid Torque Impact Wrench with 447Nm of torque, 3 modes with Precision Wrench Control for maximum versatility across all applications, DT7508-QZ ½” Square to ¼” Hex Conversion Adapter. 2 x 5.0Ah Li-Ion Batteries, Multi-Voltage Charger, Heavy Duty T-STAK Kit Box.
-
DEWALT DCK2201P1T1-XE 18V XR Premium 2 Piece Combo Kit – 5Ah & FLEXVOLT® 6Ah
$919.00- This 18V XR 2 Piece Combo Kit includes DCD1007 18V XR 3 Speed Hammer Drill Driver, DCF860 18V XR 3 Speed Impact Driver, 1 x DCB546 18V/54V XR FLEXVOLT 6.0Ah Battery Pack, 1 x DCB184 18V XR 5.0Ah Battery Pack, DCB118 18V XR 8A Fast Charger and Heavy Duty TSTAK Case.
-
DEWALT DCM562PB-XE 18V XR Blower – Bare Unit
$279.00- Professional performance guaranteed, with an air speed of 90 mph / 145 km/hr
- Variable trigger and speed lock allows for total power control, with the ability to lock speeds
- Professional performance with the added convenience of being battery powered
- Quiet design – for use in noise restricted areas
- Lightweight and compact design – at just 2.6 kg, the design minimizes stress to the users arm
- Comfort grip handle – ergonomically optimized handle size and position, with overmould for additional user comfort
-
DEWALT DCM849N-XJ 18V XR Brushless Rotary Polisher – Bare Unit
Original price was: $449.00.$429.00Current price is: $429.00.- 18V Brushless Motor delivers improved performance in demanding applications
- Variable speed dial allows for easy speed changes to suit specific applications
- Variable speed trigger allows for additional speed control by adjusting the force applied to the switch
-
DEWALT DCMHT573N-XE 54V XR FLEXVOLT Hedge Trimmer 31mm Gap – Bare Unit
Original price was: $499.00.$455.00Current price is: $455.00.- 660MM BLADE LENGTH – Covers A Large Area To Tackle Large Hedges
- CUT CAPACITY UP TO 31MM – Large Cut Capacity Ideal For Tackling Tougher, Thicker Branches
- LASER CUT, DIAMOND GROUND BLADES – Sharp Hardened Blades Resist Chipping And Provide A High Quality Cut
- BRUSHLESS MOTOR – High Output Motor Delivers 3,400 SPM For High Speed Of Cut
-
DEWALT DCS334N-XJ 18V XR Brushless Jigsaw – Bare Unit
$535.00- Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
- 4-position pendulum action controls the aggressiveness or smoothness of cuts
- Tool free adjustable shoe with anti scratch cover bevels to 45 degrees in both directions
-
DEWALT DCS335N-XJ 18V C/L JIGSAW SKIN
$535.00Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
4-position pendulum action controls the aggressiveness or smoothness of cuts
Tool free adjustable shoe with anti scratch cover bevels to 45 degrees in both directions
-
DEWALT DCS389N-XJ 54V XR FLEXVOLT Reciprocating Saw – Bare Unit
$585.00- 54V XR FLEXVOLT, Power of the Cord
- DEWALT Brushless Motor for power, extended run-time, reliability & durability
- Intelligent variable speed trigger and lock off switch
- Two position blade clamp allows for flush cutting and increased versability
- Lever action keyless blade clamp for tool-free blade change
- Pivoting Shoe with open top for high stability and visibility during a cut
- LED flashlight for improved visibility of the cut line
- Ergonomic handle with rubber grip for best comfort
-
DEWALT DCS438N-XJ 18V XR 76mm Cut Off Tool Skin
$345.00- 18V Brushless Motor For Extended Durability, High Efficiency & Provides Class Leading Power Levels
- Best In Class 22mm Depth Of Cut For Increased Application Capacity
- Forward & Reverse Blade Direction Allows For Quick & Simple Changes In Blade Direction, Allowing User To Divert Sparks When Working In Confided Areas
-
DEWALT DCS570N-XE 18V 185MM CIRC.SAW SKIN
$450.00Scale for precise cutting depth setting to 65 mm
General purpose ripping, cross-cutting and bevelling circular saw for wood and other construction materials
High torque Brushless motor for durability and power for cutting job site and joinery materials
-
DEWALT DCS573N-XE 18V XR 184mm Circular Saw With FLEXVOLT ADVANTAGE – Bare Unit
$499.00- The DEWALT brushless motor ensures longer service life, reliability and durability
- PACK ID Technology allows this tool to deliver more power when paired with an XR FLEXVOLT battery
- General purpose circular saw for sawing, cross-cutting and bevelling wood and other building materials
-
DEWALT DCV100-XE 18V XR BLOWER SKIN
$229.00Features
- Variable speed slider switch with variable speed trigger for improved control
- Inflator/deflator attachments for versatile applications
- Lock-on switch for ease of use
- Compact and lightweight blower for jobsite clean-up
Batteries and charger sold separately
-
DEWALT DCV501LN-XJ 18V L-Class Stick Vac Skin
$259.00- 18V Motor for extended durability, efficiency and power delivering an incredible 1,260 L/Min of Airflow
- L-CLASS Compliant the only hand vac certified for use on EU jobsites, ensuring maximum user protection when in use
- HEPA Filter Captures 99.97% of particles larger Than 0.3 microns
-
DEWALT DCV517N-XJ 18V XR Vacuum – Bare Unit
$249.00- Runs off 18V XR battery platform allowing quick and easy change between different tools with a single battery
- The rubber hose is extendable to 1 metre for added flexibility for a wide range of applications
- 1.9 Litre tank capacity allows for the cleaning up of larger amounts of material
