light
-
Alpha Tuffbox Drill Set Gold Series Metric 1.0 – 10.0mm 19pc
Sizes available: 1.0 – 10.0 in 0.5mm increments
• The Alpha Gold Series Drills boast the highest quality M2 HSS Jobber Drill.
• Titanium Nitride Coating increases hardness and decreases friction.
• 135º degree split point eliminates the need for centre punches or pilot drilling.
• Industrial quality.
Suitable for drilling Plastic , Wood and Metal, including Stainless Steel.
-
Alpha Tuffbox Drill Set Gold Series Metric 1.0 – 13.0mm 25pc
• The Alpha Gold Series Drills boast the highest quality M2 HSS Jobber Drill.
• Titanium Nitride Coating increases hardness and decreases friction.
• 135º degree split point eliminates the need for centre punches or pilot drilling.
• Industrial quality.
Suitable for drilling Plastic, Wood and Metal, including Stainless Steel.
-
BOSCH GAS 18V-1 PROFESSIONAL CORDLESS VACUUM CLEANER SKIN
Compact handheld 18 V dry vacuum cleaner makes short work of rough dirt
- Ideal handling: compactness, manoeuverability, cordless freedom, and quick and easy emptying of the dust container
- Large number of accessories enables flexibility in a wide range of cleaning jobs
- Mobility and easy transport: conveniently fits into an L-BOXX
-
BOSCH GBL18V-750 PROFESSIONAL BLOWER BARE TOOL
High-performance garden clearing with full control and great ergonomics
- Powerful – BITURBO technology, brushless motor and axial fan deliver volumetric flow of 780 m³/h and air speed of up to 198 km/h
- Full control – Variable speed control allows selection of optimal power, noise level, and runtime depending on your task
- Ergonomic design – Effortless working thanks to a lightweight and well-balanced design
-
BOSCH GBM 13-2 RE Professional Elec Drill
2-geared rotary drill for precision work
- Powerful 750 W motor and high torque for fast work progress, drilling holes in steel of up to 13 mm in diameter
- Compact and ergonomic design providing good tool handling for precise results
- 2-speed gearbox with speed preselection setting wheel for accurate performance in versatile applications
-
BOSCH GCG18V-600 PROFESSIONAL CORDLESS CAULK GUN SKIN
Bosch’s 1st Cordless Caulk Gun: 100% compatible with all Bosch Professional 18 V batteries
- Easy control of material flow: Speed selection with 9 speed settings and variable speed trigger
- Fast working progress even with high viscosity adhesives: 3.5 kN push force combined with a maximum (no load) feed of 7 mm/sec
- No dripping or material overflow: Plunger rod auto-reverse function relieves pressure when trigger is released
-
BOSCH GGS 8 SH Professional Straight Grinder
Most powerful tool with quick-locking nut in Bosch’s straight grinders category
- Strong 1,200 W motor ensures fast work progress with high material removal rate
- Grinder´s SDS quick-locking nut makes rapid tool-free accessory changing possible
- Restart protection functionality increases user protection during operation
-
BOSCH GKM18V-LI PROFESSIONAL CORDLESS METAL CUT SAW SKIN
Quick, precise cutting of metal – virtually spark-free
- Precise results and little need for refinishing due to minimal discolouration and low burr formation thanks to optimised speed for metal applications
- Virtually spark-free for a safe work environment
- Compact design and low weight for low user fatigue
-
BOSCH GKS 18V-68 C PROFESSIONAL CORDLESS CIRCULAR SAW SKIN -BITURBO
Cordless flexibility with corded power – for high performance
- Maximum cordless cutting performance, fully equal to corded 1,800 W due to new BITURBO Brushless technology
- Outstanding ergonomics, due to a new auxiliary handle concept which ensures perfect control in all cutting positions
- Best cutting capacity in class with up to 70 mm cutting depth in 90° cuts.
-
BOSCH GKT 18V-52 GC PROFESSIONAL CORDLESS PLUNGE SAW SKIN – BITURBO
Corded performance and superior compactness in the Bosch 18 V category
- BITURBO Brushless technology and ProCORE18V for maximum cordless cutting performance equal to corded 1,620 W plunge saws
- Superior mobility due to a uniquely compact design allowing operation with only one battery
- Very compact design enables minimum distance between saw blade and wall of only 10 mm
-
BOSCH GLI18V-10000C 18V Professional Cordless Jobsite Light
Bosch’s first floodlight with 10,000 lumens in the 18 V category
- Brighter than 500 W halogen floodlights – superior LED capable of producing up to an impressive 10,000 lumens
- Extremely robust via solid metal body shielded with shock-absorbing rubber frame and heavy-duty safety bars
- User Interface with brightness indication/charge level indicator; Bluetooth for remote control and lighting adjustments via app
-
BOSCH GLL2-80P Professional Line Laser
Levelling in 360° – Faster and easier than ever
- High work efficiency: simultaneous performance of horizontal and vertical levelling applications in the entire room with only one tool
- Large working range: precise work in a diameter of up to 80 m using the LR 2 Professional Receiver
- Easy handling: self-levelling up to 4° within 4 seconds, compact design
-
BOSCH GNH18V-64 PROFESSIONAL CORDLESS ANG. BRADDER 16G
Quick and precise fastening: finish nailer with single firing mode
- No compressor, air hose or additional gas cartridge is needed – for maximum freedom
- Blank firing with empty nail magazine is prevented by the dry-fire lockout function
- Highest accuracy through precise modification of countersink depth
-
BOSCH GPB18V-2C PROFESSIONAL RADIO
Flexible and handy: portable radio that rocks every jobsite
- Versatility thanks to wide range of compatible sources, including Bluetooth®, FM, and AUX
- Features intuitive operation and quick setup in combination with a handle and hook for vertical and horizontal placement
- Unique stereo sound due to the possibility to couple two radios with one smartphone
-
BOSCH GPB18V-2SC PROFESSIONAL RADIO
Great sound to carry around: flexible and portable digital jobsite radio
- Extreme flexibility for pleasant working: sourcing from DAB+, Bluetooth®, FM, and AUX
- Features intuitive operation and quick setup in combination with a handle and hook for vertical and horizontal placement
- Unique stereo sound due to the possibility to couple two radios with one smartphone
-
BOSCH GPL 5 G PROFESSIONAL POINT LASER
- Green laser points provide up to four times better visibility than red points
- Durable design resists tough conditions: rubberised housing with recessed glasses, IP65 dust and water jets protection
- Fast and secure mounting thanks to integrated rotation mount with strong magnets
-
BOSCH GSA18V-LI PROFESSIONAL CORDLESS RECIPROCATING SAW SKIN
18V-reciprocating saw with strong cutting performance and long runtime
- Battery´s long runtime enables over 100 cuts into spruce beams of up to 100 x 100 mm for fast work progress
- Electronic Motor Protection provides a long lifetime
- Tool-free Bosch SDS system makes changing saw blades fast and easy
NO BATTERY SUPPLIED- TOOL ONLY
-
CRESCENT 20 Oz. Hatchet with Fiberglass Handle
FEATURES- Precision ground blade with optimal cutting angle splits wood with ease
- Wrap around head and neck prevents the hatchet from separating from the handle
- Textured fawns foot grip give users an ergonomically sound and sure grip
- Rear striking face for driving stakes, nails and demolition work
- Heavy duty, oversized protective sleeve prevents damage due to overstrike
-
DEWALT 18V XR CORDLESS PLANER BARE UNIT
- Powerful brushless motor provides smooth planing performance combined with extended runtime
- Lightweight, compact and ergonomic design for comfortable use in all orientations
- Large twin blade drum with TCT blades for high quality surface finish
- On-board blade storage and Torx key enable fast blade change and minimise downtime
- Large front and rear shoe for improved stability
- Compatible with AirLock dust extraction system
STANDARD
- Tungsten carbide tipped reversible blades
- Hex wrench
- Torx key
- Guide fence
- Batteries and charger sold separately
- Blade alignment plate
-
DEWALT 18V XR HEAT GUN – BARE UNIT
- DCE530 XR Heat Gun reaches a temperature of 530°C on a high setting and 290°C on a low setting
- Select a high or low temperature setting with the 2-set temperature selector, optimising temperature for specific applications
- Keep the tool switched on using the lock-on button to improve comfort for longer applications and hands-free use
- The trigger with a built in lock-off switch prevents an accidental start up during transportation and storage, reducing risk of thermal accidents
- A built-in LED light illuminates the work place and improves visibility in small, confined spaces
- Fully compatible with all DEWALT 18V XR batteries
STANDARD
- DCE530 Cordless Heat Gun
- Reflector Nozzle
- Surface Nozzle
-
DEWALT DCC018N-XJ 18V XR INFLATOR
- Compact, lightweight, high-performance inflator and deflator with an LED light allows use at night or in low-light conditions
- High pressure hose quickly inflates items such as tyres (size 235/70R17) inflated in 400 seconds
- Output of 0.35l/min@6.2 bar and 0.6l/min@2 bar for quick inflation
-
DEWALT DCD1007WW1T-XE 18V XR Brushless Premium Hammer Drill Driver – 1 X 8Ah
Dewalt’s most powerful 18V XR Hammer Drill Driver uses a DEWALT XR Brushless motor to deliver 169Nm of torque in a 193mm body, engineered to give you faster application speeds on the toughest jobsites. Pack ID Technology allows this tool to deliver more power when paired with an 18V XR POWERSTACK or XR FLEXVOLT battery. 3 speed and 11 torque settings give you the ultimate control over drilling and fastening applications. The Anti-Rotation system detects bind-ups and shuts down the tool helping to protect you. An enhanced pivoting 70 lumen LED positioned on the foot offers greater visibility in dark and confined spaces.
-
DEWALT DCD999N-XE 18V XR XRP Hammer Drill Driver With FLEXVOLT ADVANTAGE – Bare Unit
- FLEXVOLT ADVTANGE tool technology: the tool uses intelligent electornics to sense what battery is in the tool and increase power and torque when using FLEXVOLT batteries
- 51% more power when using DCB547 XR FLEXVOLT 9Ah battery compared with DCB184 18V XR 5Ah battery
- 42% more power when using DCB546 XR FLEXVOLT 6Ah battery compared with DCB184 18V XR 5Ah battery
-
DEWALT DCD999T1-XE 18V XR Brushless Premium Hammer Drill Driver – 1 X 6Ah Batteries
- 18V XR Brushless Premium Hammer Drill Driver with Compact Design
- BRUSHLESS MOTOR: Delivers high performance, extends tool life and allows for a much shorter design
- 11-POSITION ADJUSTABLE TORQUE CONTROL: For consistent screwdriving into a variety of materials
-
DEWALT DCE0822D1G-XE 12V XR 2 Spot Cross Line Green Laser – 1 X 2Ah
- 12V rechargeable battery platform – For extra long time and the convenience of rechargeable batteries
- Projects a full cross line (horizontal & vertical) + 2 independent spot points allows multi-use tool
- Cross line function feature a 150 degree fan angle which provides ample coverage with little set-up time
-
DEWALT DCE089D1G 12V XR 3 X 360 CROSS LINE GREEN LASER KIT
OVERVIEW
- x3 360°Self Leveling Lines
- Projects bright horizontal and vertical lines.
- Variable blink sequence for manual mode.
- Working range : 30M (60M w/ detector)
- Accuracy : +/-3mm@10m
- Full-time pulse mode allows use with detector maintians full brightness for visibility
- 12V battery pack included
- Upgradable battery for extended life, fast change time, less down time
- Locking Pendulum to help prevent damage to internal components
- Integrated Magnetic Pivoting Base with ¼” Thread
- Wear resistant – overmold : IP65 / 2m drop tested
-
DEWALT DCE6820N-XJ 18V XR Water Tank
- The 18V battery powered water tank provides 15L of steady water flow without having to be manually pressurised
- The easy-to-use control panel allows the user to turn on the water supply quickly, no manual pumping required
- With two large handles, the water tank is very comfortable to move around
-
DEWALT DCF403NT-XJ 18V XR Brushless 4.8mm Rivet Tool – Bare Unit
- 18V XR Brushless, Cordless Rivet Gun that delivers fast and easy riveting performance
- Fasten all bilnd rivets from 2.4 mm , 3.2 mm , 4.0 mm and 4.8 mm to offer bigger range of application
- 10,000 N of pulling force and 25mm Stroke will give you a power to complete the application in one go and increase the performance on the job site
-
DEWALT DCF414NT-XJ 18V XR Brushless 6.3mm Rivet Tool – Bare Unit
- 18V XR Brushless, Cordless Rivet Gun that delivers fast and easy riveting performance
- Fasten all blind rivet from 4.8 mm , 6.0 mm and 6.4 mm to offer bigger range of application
- 20,000 N of pulling force and 30mm Stroke will give you a power to complete the application in one go and increase the performance on the job site
-
DEWALT DCF620KN-XE 18V C/L COLLATED SCREW DRIVER
18V XR Li-Ion BRUSHLESS Drywall Screwdriver for efficient fitting of drywall
Powerful 4400rpm BRUSHLESS motor drives screws efficiently and effectively offering maximum runtime and a compact tool
One of the lightest and most compact tools on the market – it ensures that you can work comfortably and get into small spaces
-
DEWALT DCF894N-XJ 18V XR Brushless Compact High Torque 1/2″ Impact Wrench – Bare Unit
- All-new 18V BRUSHLESS XR Compact High-Torque Wrench featuring Precision Wrench™
- Powerful fan cooled motor delivers up to 447Nm of torque and 3100 impacts per minute for heavy duty fastening applications
- At just 178mm long and weighing only 1.5kg, the tool retains power whilst being compact enough to get into tight spaces
-
DEWALT DCF900N-XJ 18V XR Brushless 1/2″ Hog Ring High Torque Impact Wrench – Bare Unit
- 1/2” square drive with hog ring allows quick socket changes
- Variable trigger allows complete control over all applications
- Efficient brushless motor delivers high performance, extends tool life and allows for much shorter design
-
DEWALT DCG406N-XJ 18V XR Brushless 125mm Angle Grinder Skin
Features
- 18V Brushless Motor
- Electronic Brake stops the wheel quickly when the trigger is released
- Electronic Clutch reduces the kickback reaction in the event of a pinch or stall
- Mesh Covers restricts dust being sucked through the motor
- Rubber Overmould provides enhanced grip and comfort
- Two position side handle offers greater comfort and control
Includes
- (1) 2 position side handle
- (1) Keyless protective guard
- (1) Blade wrench
Specifications
SUPPLIED IN KITBOXNONO LOAD SPEED (RPM)9000BRAKEYESPRODUCT WEIGHT [METRIC]1.75 KGPRODUCT HEIGHT [IMPERIAL]14 INPOWER SOURCECORDLESSPRODUCT LENGTH [METRIC]310 MMPRODUCT WEIGHT [IMPERIAL]9 LBS -
DEWALT DCG416N-XE 18V XR 125mm Angle Grinder With FLEXVOLT ADVANTAGE – Bare Unit
- PACK ID Technology allows this tool to deliver more power when paired with an XR FLEXVOLT battery
- The brushless motor ensures longer operating time and durability
- The electronic brake stops the disc quickly when the shutter-release button is released
-
DEWALT DCG416VSN-XJ 18V XR 125mm Variable Speed Angle Grinder – Bare Unit
- Brushless motor technology delivers improved power efficiency and longer runtime for extended life
- Variable speed gives ultimate control for a wider range of applications
- Electronic brake stops the wheel quickly when the trigger is released
-
DEWALT DCG440N-XJ 54V XR FLEXVOLT 180mm Angle Grinder – Bare Unit
- Electronic Brake stops the wheel quickly when the trigger is disengaged
- Electronic Clutch Reduces the kick back reaction in the event of a pinch or stall
- A mesh cover over air intake vents restricts dust being sucked through the motor
- Rubber Overmould provides enhanced grip and comfort
- Safe and controllable use thanks to electronic soft start
- Recessed spindle lock design allows max depth of cut and greater protection to button when using in confined spaces
- Soft start allows gradual acceleration of speed
- 54V Brushless motor helps improve performance in demanding applications
-
DEWALT DCH133N-XJ 18V XR Brushless 26mm SDS-Plus Hammer Drill – Bare Unit
- Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
- Brushless motor for improved runtime
- Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 22mm
-
DEWALT DCH333X2-XE 54V XR FLEXVOLT 30mm SDS Plus Hammer Drill – 2 X 9Ah
- Category-leading high speed drilling performance at more than 66 holes (18mm Ø x 80mm) per charge
- Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
- Brushless motor with high capacity XR FLEXVOLT 9.0Ah 18V/54V Lithium-ion battery platform for extreme runtime and reduced maintenance
-
DEWALT DCH417NT-XJ 54V XR FLEXVOLT 32mm SDS-Plus Rotary Hammer with QCC
- Quick release SDS-Plus toolholder and keyless chuck supplied for easy switching between hammer / rotary hammer and rotary only applications
- Category-leading high speed drilling performance at more than 74 holes (18mm Ø x 80mm) per charge
- Rotation stop mode for light chiseling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
-
DEWALT DCK2050H2T-XE 18V XR POWERSTACK Twin Kit 5Ah
- Twin kit comprising DCD805 18V XR Compact Hammer Drill Driver and DCF850 18V XR Impact Driver
- Kitted with 2 x 5Ah POWERSTACK batteries – our most powerful, most efficient and longest lifespan battery in its class
- Battery and tool covered by 3-Year Extended Warranty, subject to registration
-
DEWALT DCK2052H1T1-XE DEWALT 18V PREMIUM POWERSTACK TWIN KIT
DeWalt Cordless 18v/54v Flexvolt Advantage Hammer Drill and Impact Driver Kit
DeWalt’s ultra premium two piece kit, now with a 6/2Ah, 18/54v Battery and a 5Ah Powerstack battery!
Includes:
DCD999 – 18V XR with FLEXVOLT ADVANTAGE Next Generation Premium XRP Hammer Drill Driver
DCF850 – 18V XR 3 Speed Impact Driver
DCB546-XE – 18V/54V XR FLEXVOLT 6.0Ah Battery Pack
DCBP518-XJ -18V XR POWERSTACK 5.0Ah Battery Pack
DCB116-XE – Multi-Voltage Charger (6Amp Charge Rate)
TSTAK Case -
DEWALT DCK2094P2-XE 18V XR Li-Ion 2pc Combination Kit 5.0Ah
- This combination kit includes the industry leading Heavy Duty DCD996 18V XRP BRUSHLESS 3 Speed Hammer Drill/Driver with 820 UWO Power featuring a 60 Lumen LED Light and all metal gearbox. DCF894 18V XR Li-Ion BRUSHLESS Mid Torque Impact Wrench with 447Nm of torque, 3 modes with Precision Wrench Control for maximum versatility across all applications, DT7508-QZ ½” Square to ¼” Hex Conversion Adapter. 2 x 5.0Ah Li-Ion Batteries, Multi-Voltage Charger, Heavy Duty T-STAK Kit Box.
-
DEWALT DCK2201P1T1-XE 18V XR Premium 2 Piece Combo Kit – 5Ah & FLEXVOLT® 6Ah
- This 18V XR 2 Piece Combo Kit includes DCD1007 18V XR 3 Speed Hammer Drill Driver, DCF860 18V XR 3 Speed Impact Driver, 1 x DCB546 18V/54V XR FLEXVOLT 6.0Ah Battery Pack, 1 x DCB184 18V XR 5.0Ah Battery Pack, DCB118 18V XR 8A Fast Charger and Heavy Duty TSTAK Case.
-
DEWALT DCM562PB-XE 18V XR Blower – Bare Unit
- Professional performance guaranteed, with an air speed of 90 mph / 145 km/hr
- Variable trigger and speed lock allows for total power control, with the ability to lock speeds
- Professional performance with the added convenience of being battery powered
- Quiet design – for use in noise restricted areas
- Lightweight and compact design – at just 2.6 kg, the design minimizes stress to the users arm
- Comfort grip handle – ergonomically optimized handle size and position, with overmould for additional user comfort
-
DEWALT DCM849N-XJ 18V XR Brushless Rotary Polisher – Bare Unit
- 18V Brushless Motor delivers improved performance in demanding applications
- Variable speed dial allows for easy speed changes to suit specific applications
- Variable speed trigger allows for additional speed control by adjusting the force applied to the switch
-
DEWALT DCMHT573N-XE 54V XR FLEXVOLT Hedge Trimmer 31mm Gap – Bare Unit
- 660MM BLADE LENGTH – Covers A Large Area To Tackle Large Hedges
- CUT CAPACITY UP TO 31MM – Large Cut Capacity Ideal For Tackling Tougher, Thicker Branches
- LASER CUT, DIAMOND GROUND BLADES – Sharp Hardened Blades Resist Chipping And Provide A High Quality Cut
- BRUSHLESS MOTOR – High Output Motor Delivers 3,400 SPM For High Speed Of Cut
-
DEWALT DCS334N-XJ 18V XR Brushless Jigsaw – Bare Unit
- Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
- 4-position pendulum action controls the aggressiveness or smoothness of cuts
- Tool free adjustable shoe with anti scratch cover bevels to 45 degrees in both directions
-
DEWALT DCS335N-XJ 18V C/L JIGSAW SKIN
Intelligent variable speed trigger & lock-off switch for quick controlled cuts and enhanced work safety
4-position pendulum action controls the aggressiveness or smoothness of cuts
Tool free adjustable shoe with anti scratch cover bevels to 45 degrees in both directions
-
DEWALT DCS389N-XJ 54V XR FLEXVOLT Reciprocating Saw – Bare Unit
- 54V XR FLEXVOLT, Power of the Cord
- DEWALT Brushless Motor for power, extended run-time, reliability & durability
- Intelligent variable speed trigger and lock off switch
- Two position blade clamp allows for flush cutting and increased versability
- Lever action keyless blade clamp for tool-free blade change
- Pivoting Shoe with open top for high stability and visibility during a cut
- LED flashlight for improved visibility of the cut line
- Ergonomic handle with rubber grip for best comfort
-
DEWALT DCS438N-XJ 18V XR 76mm Cut Off Tool Skin
- 18V Brushless Motor For Extended Durability, High Efficiency & Provides Class Leading Power Levels
- Best In Class 22mm Depth Of Cut For Increased Application Capacity
- Forward & Reverse Blade Direction Allows For Quick & Simple Changes In Blade Direction, Allowing User To Divert Sparks When Working In Confided Areas
-
DEWALT DCS573N-XE 18V XR 184mm Circular Saw With FLEXVOLT ADVANTAGE – Bare Unit
- The DEWALT brushless motor ensures longer service life, reliability and durability
- PACK ID Technology allows this tool to deliver more power when paired with an XR FLEXVOLT battery
- General purpose circular saw for sawing, cross-cutting and bevelling wood and other building materials
-
DEWALT DCV100-XE 18V XR BLOWER SKIN
Features
- Variable speed slider switch with variable speed trigger for improved control
- Inflator/deflator attachments for versatile applications
- Lock-on switch for ease of use
- Compact and lightweight blower for jobsite clean-up
Batteries and charger sold separately
-
DEWALT DCV501LN-XJ 18V L-Class Stick Vac Skin
- 18V Motor for extended durability, efficiency and power delivering an incredible 1,260 L/Min of Airflow
- L-CLASS Compliant the only hand vac certified for use on EU jobsites, ensuring maximum user protection when in use
- HEPA Filter Captures 99.97% of particles larger Than 0.3 microns
-
DEWALT DCV584L-XE XR Li-Ion AC/DC, L Class Wet & Dry Vacuum
- Operates on 14.4V / 18V and 54V FLEXVOLT XR battery packs plus runs on a 240V mains supply
- On-board hose, cord and accessory storage provides convenient transport and storage
- High efficiency washable HEPA filter traps 99.97% of dust as fine as 0.3 Microns
-
DEWALT DCW200N-XJ 18V XR BRUSHLESS 1/4 SHEET PALM SANDER – BARE UNIT
Cordless technology for more user freedom
Brushless motor offering superb runtime and durability
Dust port connects directly to DEWALT‘s Airlock System forming a secure, locking connection between tool and dust extractor[cs], or std. 35mm connector
-
DEWALT DCW600N-XJ 18V XR Brushless 8mm + 1/4″ Router – Bare Unit
- Aluminium motor housing can be transitioned quickly to a fixed base attachment ( not included ) increasing the versatility of the machine
- Multiple spindle lock detents enables quick and simple router bit changes
- Variable Speed Control to set optimum cutter speed for different materials
-
DEWALT DCW604N-XJ 18V XR Brushless 8mm (1/4″) Router – Bare Unit
Includes
- (1) 8mm Collet (¼” GB)
- (1) 17 mm Spanner
- (1) Centering Cone
- (1) 17 mm Guide Bush
- (1) Router Body With Plunge Base
- (1) Fixed Base
- (1) Dust Extraction Fixed Base
- (1) Dust Extraction Plunge Base
- (1) Parallel Fence With Guide Rods (Plunge Base)
- (1) Basic Parallel Fence (Fixed Base)
-
DEWALT DWE4277-XE 125mm Angle Grinder
- No volt release switch will prevent the unit starting when plugged in, even if the switch is in the on position. Switch must be consciously reset before power is delivered
- Overload protection will prevent the unit over heating by shutting the unit off until the unit has cooled down
- Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion and tracking
-
DEWALT DWE6423-XE 125mm Random Orbit Palm Sander 280W
- 280 Watt variable speed motor adjusts from 8,000-12,000 orbits per minute, providing ideal sanding speed for all materials
- Low vibration allowing for extended usage without fatigue
- Built in dust extraction port allowing direct connection to dust extractor, or DEWALT AirLock system
-
DEWALT DWP849X-XE 150mm & 180mm variable speed polisher
- Replaceable wool ingestion shields prevent wool from being sucked into the unit and blocking the tool
- Pop off brushes protect the armature from damage at the end of brush life resulting in greater motor life
- No volt release switch will prevent the unit from starting when plugged in, even if the switch is in the on position. Switch must be consciously reset before power is delivered
-
DEWALT DWST1-75664-XE Tough System Music
Features
- TOUGHSYSTEM™ Compatible
- 6 drivers best in category, 40W RMS, 2 sub-woofers for premium sound
- IP54 – protection against dust and water jets
- Bluetooth® Technology to remotely control your music
- 3.5mm Aux. Input, 2.4 Hz USB charger
- Class D amplifier, Digital Sound processor for sound optimisation
- Wide bandwidth 30Hz to 18KHz
- Dot Matrix pixel screen
- Power: AC & 18V/14.4V DEWALT battery charger, USB charger
- DAB+ with 12 FM presets
-
DEWALT DWST83294-1 TOUGHSYSTEM 2.0 – DS300 CASE
- A high performance seal in the lid ensures they are dust tight and water jet resistant (IP65) to withstand the most severe weather
- NEW AUTO STACKING LATCHES – Intuitive, Easy To Use And Time Saving Latches For Connecting Modules Together
- NEW EASYCLOSE METAL WIRE FRONT LATCHES – Providing Easy One Handed Operation
-
DEWALT DWST83342-1 TOUGHSYSTEM 2.0 STORAGE BOX – DS400
- High performance step-shank design for optimal penetration
- High performance seal in the lid ensures they are dust tight and water jet resistant (IP65) to withstand the most severe weather
- NEW EASYCLOSE METAL WIRE FRONT LATCHES – Providing Easy One Handed Operation
-
DEWALT DWST83522-1 TOUGHSYSTEM® 22 in. Bag
- TOUGHSYSTEM® 2.0 COMPATIBLE: Connectivity to all modules enabling one storage solution
- DURABILITY: Strong Water and dirt repellent tarpaulin combined with 1680D denier and a plastic base for maximum strength durability.
- 360° ACCESS: Optimum Internal and External storage with 360° access to tools in different pockets
-
DEWALT® TOUGHSYSTEM® 2.0 Adjustable Work Light with Storage
- 2-IN-1 FUNCTIONALITY – Illuminate work areas and transport essential tools with an adjustable work light featuring 2 pivoting LED heads and a compact storage box.
- POWERFUL LIGHTING – Brighten dim spaces with up to 4,000 lumens (using both lights) of natural white light and 7 brightness levels.
- CORDLESS OPERATION – using a DEWALT® 18V or FLEXVOLT® battery†
-
Ehoma Bar Clamp & Spreader 305 x 95mm
Feature
• Removable soft pads.
• Spring loaded pressure jaw.
• Cast alloy construction.
• Release mechanism for quick action.
• Head can be placed on opposite end to create a spreader
Specification
• Span x Depth: 300 x 95mm
• Spreading Capacity: 170 – 515mm
• Clamping Force: 350kg
-
ESTWING 20oz Claw Hammer
Estwing’s Curved Claw Solid Steel Hammer provide unsurpassed balance and temper. The head and handle are fully polished and forged in one piece. Our exclusive Shock Reduction Grip® is molded on and offers the utmost in both comfort and durability; while reducing vibrations caused by impact.
Face: Smooth
Head Weight: 560 gram (20oz)
Overall Length: 343mm -
FESTOOL 18V 80mm x 133mm Orbital 1/4 Sheet Sander in Systainer – RTSC400
The ergonomic one-handed cordless orbital sander.
The new RTSC 400, DTSC 400, ETSC 125 cordless compact sanders ensure unparalleled mobility and ease of movement when working. The powerful 18 V battery pack with 3.1 Ah guarantees power similar to that of a mains-powered tool. And it is the key to an extremely compact design with balanced weight distribution and perfect ergonomics with a weight of just 1.4 kg. The integral dust extraction system, in combination with the long-life dust collection bag, enables the machine to be used flexibly – effortlessly even overhead, vertically or in hard-to-reach areas. The battery pack can be replaced with the plug it-mains adapter to achieve an unlimited running time – ideal for stationary applications and in combination with a Festool mobile dust extractor.
Main Applications
- Cable-free sanding where there is no power connection or where this is difficult to access (e.g. outdoors, on scaffolding)
- Mobile working when the power cable and suction hose are extremely disruptive to the application (e.g. vertical surfaces, overheard sanding, rendering edges, etc.)
- Ideal for vertical surfaces or overhead work
- One-handed sander for small and narrow surfaces
- Sanding off paint and varnish on window frames, door frames and eaves
- With plug it-mains adapter as a sanding machine with an unlimited running time during continuous electrical operation – ideal for use indoors in combination with a Festool mobile dust extractor
-
FESTOOL 18V HAMMER DRILL TPC18/4 Speed Li BASIC SYS
Cordless hammer drill QUADRIVE TPC 18/4
TPC 18/4 Li BASIC
- Brushless EC TEC motor for maximum service life and huge degree of efficiency, combined with lithium-ion battery (batteries sold separately). 40% enhanced torque in 2nd gear.
- 4-gear transmission with up to 3,600 rpm for fast and neat drilling. Now with superior gear shift and kick back stop
- LED lighting which can be switched on separately and battery charging status display
- The universal solution for high-torque screwdriving and drilling operations with in wood, metal and concrete with the optional axial impact.
-
FESTOOL 55mm Plunge Router in Systainer-OF1010EBQ+
Functions
Small tool for delicate tasks.
Extremely versatile. Extremely precise. Extremely easy to handle: Whether guided freely or on the guide rail, the OF 1010 router is the ideal one-handed device. Thanks to its size and low weight it can be guided along edges, lines or curves with just one hand. For routing profiles, grooves, rebates and dovetail joints – the OF 1010 impresses with a wide variety of technical solutions.
- Compact design and light weight
- Clear view of the routing area
- Quick and easy cutter changes
- Routing depth adjustment to 1/10 mm
- Torsionally rigid router table due to guide columns on both sides
- Greater safety thanks to quick-acting brake and restart protection
- MMC electronics for adaptation to the working material and temperature monitoring
- Chip extraction system integrated into the router table for hose diameters D 27 and D 36
-
FESTOOL 574351 OF2200 80mm Plunge Router in Systainer
Nothing is impossible with this powerhouse
The OF 2200 router offers the most powerful low end torque, highest routing precision, and top ergonomic comfort. Producing a massive 2200 W of power, even routing the thickest, hardest materials is performed to perfection.
The double column clamping system guarantees accurate routing height, and all important controls are within easy reach to allow both hands to remain on the machine during use.
When used with the side stop or guide rail, the offset guide rods ensure easier routing in difficult materials for long periods. Pair with a Festool Dust Extractor to get up to 99% of all chips extracted during edge routing.
Main Applications
- Rounding, trenching and profiling
- Routing large cut outs, circles and arcs
- Creating worktop corner joints
- Routing seal channels in windows and doors
-
FESTOOL 576019 GEARED SANDER RO150 FEQ 230V SYS
Technical data
Power consumption: 720 W ROTEX rotary motion speed: 320-660 min-1 Eccentric motion speed: 3300-6800 min-1 Sanding stroke: 5 mm FastFix sanding pad Ø: 150 mm Connection Ø d/e: 27 mm Weight: 2.3 kg Items included
FastFix sanding pad Ø 150 mm (soft HT), Festool PROTECTOR, in a SYSTAINER -
FESTOOL 576031 GEARED SANDER RO125 FEQ 230V SYS
- Three machines in one: aggressive material removal when coarse sanding, extra-fine sanding pattern when fine sanding and perfect gleaming surfaces when polishing
- A powerful motor and combination of eccentric and orbital motion remove material three times faster than conventional eccentric sanders
- FastFix sanding pad system, tool-less
- Healthy, efficient dust extraction with the Jetstream principle
-
FESTOOL 576055 80 x 133mm Orbital 1/4 Sheet Sander in Systainer RTS400REQ
Compact one-handed sander.
Makes sanding overhead for sustained periods of time effortless. The RUTSCHER orbital sander, delta sander and eccentric sander are equipped with maximum flexibility for individual task requirements: The new generation RTS, DTS and ETS 125.
They are characterised by compact design, with a weight of just 1.2 kg and the recently developed MMC control electronics that guarantee up to 25% greater removal capacity at constant powerful speed.
These sophisticated details may not sound spectacular – but they are certainly convincing. The integrated long-life chip collection bag for dust-free work, the aesthetically pleasing soft grip inserts, through to the PROTECTOR edge protection for less reworking.
The new generation RTS, DTS and ETS compact sanders: A visible, perceptible and even audible improvement.
Main applications
- Ideal for vertical surfaces or overhead work
- One-handed sander for small and narrow surfaces
- Sanding off paint and varnishes on window frames
- Sanding natural wood surfaces and veneering prior to varnishing – particularly furniture
- Sanding close to edges on different materials
-
FESTOOL 576076 ETS 150mm Random Orbital 3mm Sander in Systainer
Perfect finishing sander.
The ETS 150/3 eccentric sander is the favourite when it comes to fine and extra-fine sanding. As the lightweight in its class, its 3 mm sanding stroke achieves an excellent surface quality while providing high power thanks to the MMC electronics. Whether it’s horizontal, vertical or overhead, the combination of soft grip and ergonomic rod handle means that the ETS 150/3 can adapt to all hand movements. Extremely smooth running, infinite speed adjustment, even during sanding, and the safe sanding pad brake make the ETS ideal for perfect surfaces.
Main applications
- Finish sanding on paintwork, wood and plastic
- Pre-sanding for polishing
- Final sanding of mineral materials
- Sanding high-gloss surfaces ready for polishing
- Sanding wooden surfaces ready for waxing
- Final sanding of fillers
-
FESTOOL 576084 ETS150/5 150mm Random Orbital 5mm Sander in Systainer
Ideal intermediate sander.
The ETS 150/5 eccentric sander is the ideal intermediate sander and, with a 5 mm sanding stroke, achieves an optimum surface quality with a high material removal capacity. Suitable for large surfaces as well as working in detail – from primary to intermediate sanding. Whether it’s coats of paint, window frames or natural wood, sanding or surface-grinding metal surfaces, filled areas on plasterboard panels or adjoining wood grains in corners – even in critical areas the ETS 150/5 eccentric sander is in its element.
If you need any help to choose the right sander, check out our helpful guide with tips and videos on our range of 150mm sanders.
Main applications
- Intermediate and coarse sanding of clear coats and fillers
- For flat and curved surfaces
- Final sanding of fillers
-
FESTOOL 576211 70mm Plunge Router in Systainer OF1400
Functions
Power and ease of operation in perfect harmony
The handy multi-talent: The OF 1400 router weighs just 4.5 kg – one of the lowest machine weights in its class.
The 70 mm routing stroke is impressive when making recesses for fittings or routing with templates. It also has a comprehensive set of equipment that enables it to master virtually any routing task.
Main applications
- Rounding, chamfering, rebating and profiling edges
- Routing circles and cut-outs with the multi-routing template
- Grooving rear panels or recessing dovetail batons with the guide system
- Routing with the routing aid to fit Schallex, draft excluders or espagnolettes
- Routing mineral material (max. cutter Ø 45 mm)
-
FESTOOL 576249 EHL65E 65mm Single Handed Planer in Systainer
Modified slightly. Improved decisively.
Weighing just 2.4 kg and with a compact design, the EHL 65 electric planer is not only the lightest and lowest one-handed planer in its class, but also the most powerful.
4 mm planing and 23 mm rebate depth and excellent surface finish thanks to the unique spiral blade with pulling cut.
With SoftGrip handle and cutting depth adjustment, single-button operation and non-slip ridges on the housing for a secure hold. This means that the planer can be guided effortlessly, whether it’s horizontally or vertically, with one or two hands, with the left hand or right hand. In short: It’s ergonomic. Fast. Precise.
The one-handed planer for professionals.
-
FESTOOL 576264 GEARED SANDER RO90DXFEQ
ROTEX RO 90 DX PLUS
- Four machines in one: High material removal capacity in coarse sanding mode with ROTEX rotary motion, extra-fine sanding pattern in intermediate sanding and fine sanding stages, cleaner corners with the delta sanding pad and shiny results when polishing
- Durable eccentric bearings, a double-sealed gear unit and a dustproof switch extend the service life of the machine
- ROTEX rotary motion for convenient polishing – the reduced speed keeps the temperature low and prevents the polish from clouding or spraying off
- FastFix sanding pad system, tool-less
-
FESTOOL 576324 ETS EC150/3 150mm Brushless Random Orbital 3mm Sander in Systainer
The perfect finishing sander in the compact class
The Festool ETS EC 150/3 random orbital sander is the ideal sander for fine and extra fine sanding. It’s compact and lightweight design makes all day work tireless. With an EC-TEC brushless motor, the tool uses power more efficiently and requires less maintenance. A Softgrip surface enables you to sand horizontal, vertical or overhead without exerting excess force. Vibration and extraction detection provides maximum safety. Used optimally with Festool Multi-Jetstream pads and abrasives, and a Festool Dust Extractor, the perfect, dust free finish is guaranteed with every job.
Main Applications
- Pre sanding of flat and curved surfaces
- Finish sanding on paintwork, wood and plastic
- Final sanding of fillers
- Fine sanding of mineral materials
-
FESTOOL 576333 ETS EC150/5 150mm Brushless Random Orbital 5mm Sander in Systainer
The ideal intermediate sander in the compact class.
Perfectly built for manual operation. For reduced fatigue when carrying out overhead sanding work and a good feeling on edges, as well as convenient operation in any position. The ETS EC 150. At just 116 mm high and with a brushless EC-TEC motor and ergonomic housing geometry with perfectly balanced centre of gravity. And with additional innovative details such as automatic dust control, integrated sanding pad brake and the unique Vibration Control System for added health benefits.
Main Applications
- Intermediate and coarse sanding of clear coats and fillers
- For flat and curved surfaces
- Final sanding of fillers
-
FESTOOL 576732 PLUNGE SAW TSV60 KEBQ-PLUS With Scoring Function
Plunge Cut Saw TSV 60
TSV 60 KEBQ-Plus with scoring function
Technical data
Power consumption: 1500 W no load speed: 3000 – 6800 min-1 no load speed scorer: 16000 – 22000 min-1 Saw blade / scorer diameter: 168 / 47 mm Angular range: -1 to 47 ° Cutting depth: 0-62 mm Weight: 6 kg Items included
Splinterguard, viewing window, Allen key 5mm, fine tooth saw blade WD42, diamond scoring blade, in a SYSTAINER SYS3 M 337 -
FESTOOL CT-VA Cyclone Pre Separator
Efficient, simple and reliable
The Festool CT Pre Separator with cyclone technology separates and collects coarse and fine dust before it reaches the mobile dust extractor. The dust heavy air that is drawn in is swirled into a spiral movement in the cyclone, causing the dust particles to hit against the wall of the cyclone and, due to the gravitational force, to fall into the collection container of the CT pre separator.
For craftsmen who work with large volumes of dust and debris, the CT Cyclone pre separator is the simplest answer for increasing the efficiency of your CT Dust Extractor and minimizing its lifetime cost of ownership all within a compact solution that fits seamlessly into the Festool Systainer modular storage system, allowing for easy storage and transportation.
Remove larger dust and debris before it fills your filter bag by using the CT Cyclone and reduce how often you need to replace filter bags and filters. Maintains a consistently high suction power as a result of reducing the dust load on the main filter.
-
FESTOOL Systainer3 Rack
Making small Systainers even more mobile: The Rack system.
For all Systainer³ S 76 variants not suitable for Systainer³ S 147
Organisation and overview for small Systainers: The Systainer³ Rack is a mobile organisation system that can flexibly expand to fit your individual requirements. It is arranged like a shelf in the Systainer format, and offers space for six MINI-Systainer³ S 76 products. This allows you to neatly stow your MINI-Systainers and also to transport them as part of the bott vario3 vehicle equipment. The Rack system simply grows along with your requirements. You can build your own shelving system for your workshop or combine the Rack with other Systainers in any number of ways – for maximum organisation and a complete overview at your workplace.
- Clearly organised: Shelf module with space for six Systainer³ S 76 products
- Modular: Can be combined with one another to form a flexible storage system in the workshop.
- Perfectly stowed: Spring mechanism for easily removing the MINI-Systainers with a press of your finger.
- Handy: Contents are accessible at all times, even when the Systainers are stacked.
- More mobile: Thanks to the SYS-RB roll board or the SYS-Roll transport trolley.
- Compatible: Fits the entire Festool Systainer system – easy to connect and transport.
Main applications
- Transport and storage of all Systainer³ S 76 variants
- Compatible with all Systainer generations, mobile dust extractors and many other system accessories
-
GEARWRENCH 10 Piece SAE Ball End T-Handle Hex Key Set
The GEARWRENCH 10 Piece SAE t-handle and bell end hex key set includes hex keys made from alloy steel to deliver maximum strength and resist rotational distortion. Ball end design provides increased access at 25 degrees, and t-handles offer a comfort grip for non-slip use and greater torque.
-
GEARWRENCH 8 piece Metric T-Handle Ball End Hex Key Set
The GEARWRENCH 8-Piece Metric T-handle ball end hex key set includes hex keys made from alloy steel to deliver maximum strength and resist rotational distortion. Ball end design provides increased access at 25°. T-handles offer a comfort grip for non-slip use and greater torque.
Highlights
- Ball end design provides increased access, increasing entry angle to 250°
- Keys made with alloy steel for maximum strength and to resist rotational distortion
- Chamfered edges on both ends help guide the key into the fastener smoothly and quickly
- Comfort dual material grip allows for added torque and non-slip use
- Keys can be used as short or long arm, providing access in all situations
- Size markings clearly identified at base of T-handle
- Includes metal stand for storage and organization
- Sizes include: 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm, 8 mm, and 10 mm
-
GrizzlyPRO LED Work Light Edge 6500Lm
Fun fact: Putting the GrizzlyPRO Edge LED work light too close to you would not be the brightest idea! Its cool white light is no match for your eyes but is ideal for painters and plasterers when working or screening workmanship. With long-lasting integrated SMD LED technology, the Grizzly Edge shines at the best colour temperature of 5700K (daylight) ensuring you have the best colour of light to work with at all times.
GrizzlyPRO lights project a wash light. A “wash” will bathe an area with light and have soft edges on the beam. Washes are great for evenly lighting up large like architecture, walls, workshops and construction sites.
Grizzly has incorporated a clean slimline design for the Edge series, allowing it to look slick when placed outdoors or indoors or to save space when stored. The Edge work light is easy to use. Simply place it down on its base, hang it, or secure it to a tripod and plug in the power cord and switch it on.
The heavy-duty cast aluminium and industrial ABS housing provide strength and durability, with an industrial powder-coated aluminium frame & padded carry handle, you can easily adjust the frame to the desired light angled for your application.
GrizzlyPRO makes sure your toughest, dirtiest jobs are well-lit and safe.
-
GrizzlyPRO LED Work Light Edge 8000Lm
Bright and light. The GrizzlyPRO 8000 Lumen Edge LED work light will for sure light up your life. It shines a cool white light making it an ideal solution for painters and plasterers when working or inspecting. With long-lasting integrated SMD LED technology, the Grizzly Edge shines at the best colour temperature of 5700K (daylight) ensuring you have the best colour of light to work with at all times.
GrizzlyPRO lights project a wash light. A “wash” will bathe an area with light and have soft edges on the beam. Washes are great for evenly lighting up large like architecture, walls, workshops and construction sites.
GrizzlyPROs slimline Edge design makes it light and easy to carry from place to place, also saving space when stored. The Edge work light is easy to use. Simply place it down on its base, hang it, or secure it to a tripod and plug in the power cord and switch it on.
The heavy-duty cast aluminium and industrial ABS housing provide strength and durability, with an industrial powder-coated aluminium frame & padded carry handle, you can easily adjust the frame to the desired light angled for your application.
GrizzlyPRO makes sure your toughest, dirtiest jobs are well-lit and safe.
-
HIKOKI 1050W Heavy Duty Sabre Saw CR13VB(G1Z)
- Powerful 1050W motor
- Unique ‘swing’ action for faster cutting of most materials
- Tool-less blade changing and shoe plate adjustment
- Speed controlled by both a pre-set dial and the trigger switch
- Rubber, non-slip, front and rear hand grips
- Blades can be mounted upside down to perform pocket cuts
- Accepts standard sabre saw blades
-
HIKOKI 1600mm Guide Rail (Suits C3606DPA)
For straight and secure guidance Splinter protection reduces breakout when sawing Adhesive coating for safe, non-slip surface contact as well as protection of the workpiece surface With holes to fix the rail to the workpiece and for hanging storage Can be extended in length with the second guide rail and FSV connector (accessory). Part Number FS160INBAG supplied by sister brand Metabo Power Tools.
-
HIKOKI 36V 1,100Nm 3/4″ Impact Wrench Bare Tool
Product Specs
Capacity Bolt M12 – M30 High Tension Bolt M10 – M24 Square Drive 19mm (3/4″) Tightening Torque 1,100Nm Nut Busting Torque 1,800Nm Voltage 36V Multi Volt No Load Speed High Mode 0 – 1,500/min Medium Mode 0 – 1,200/min Low Mode 2 0 – 900/min Low Mode 1 0 – 600/min Full Impact Rate High Mode 0 – 2,900/min Medium Mode 0 – 2,300/min Low Mode 2 0 – 1,800/min Low Mode 1 0 – 1,200/min Approximate Tightening Torque High Mode 1,100Nm Medium Mode 800Nm Low Mode 2 600Nm Low Mode 1 400Nm Overall Length 221mm Weight 3.7kg (BSL36A18) Standard Accessories Belt Hook. Supplied without batteries and charger. -
HIKOKI 36V 20mm Heavy Duty Impact Drill Bare Tool
Capacity
Drill Chuck 13mm (Keyless) Capacity Core Bit 160mm Masonry 20mm Steel 16mm Wood 40mm Battery Voltage 36V No Load Speed High 0-1,4000/min Low 0-1,000/min Impact Mode High 18,200/min Low 13,000/min Motor Type Brushless Overall Length 340mm Weight 3.3kg (BSL36A18) Standard Accessories Supplied without battery and charger -
HIKOKI 36V Brushless 76mm Belt Sander Bare Tool
Product Specs
Belt Size 76mm x 533mm Belt Speed 122 – 450m/min Speed Modes 5 Speeds + AUTOmode Switch Type Trigger Tracking System Tool-free Belt-changing System Tool-free (Lever) Battery Voltage 36V Multi Volt Motor Type Brushless Length 330mm Weight 4.5kg (BSL36B18) Standard Accessories Includes Dust Bag, 1x #80 Sanding Paper. Supplied without batteries and changer -
HIKOKI 36V High Powered Brushless Sabre Saw Bare Tool
Product Specs
Capacity Pipe 130mm Steel Plate 19mm Wood 300mm Voltage 36V Multi Volt No Load Speed Slow Speed 0 – 1,700/min Medium Speed 0 – 2,000/min High Speed 0 – 2,500/min Fastest Speed 0 – 3,000/min Stroke Length 32mm Orbital Cutting Yes Speed Control 4 Stage Counterweight System Twin-rotating system Length 457mm Weight 4.8kg (BSL36A18) Standard Accessories Curve Blade. Supplied without batteries or charger.
