heavy
-
DEWALT 18V XR 55CM HEDGE TRIMMER – BARE UNIT
$315.00- POWER & RUN TIME – Power to do the Job, Run time for the day. 55cm blade & 75 minutes runtime
- CUT CAPACITY – 25 mm blade gap will guaranty higher performance and less jams
- EASE OF USE & ERGONOMICS – Lightweight and balanced to reduce user fatigue. 2.9 Kg, Overmould for higher comfort and better grip.
-
DEWALT 54V XR FLEXVOLT 254MM MITRE SAW – BARE UNIT
$1,615.00- Base and fence designed, machined and checked to the highest standards of accuracy to deliver 0.1° accuracy in key applications
- Cam action mitre lock function makes mitre setting faster and easier allowing the user to quickly adjust angles between 0° – 50° left and 0° – 60° right
- Compact and lightweight design characteristics deliver a saw with application focused capacities which is easy to transport around the jobsite
- The innovative grooving stop allows the adjustment of the cutting depth for grooving and rebating applications
- The large dual sliding fence gives maximum support in large material cuts at any angle or combination of angles
- Linear 32mm horizontal rails with roller bearings provide maximum precision when cutting materials up to 305 mm wide
-
DEWALT 54V XR FLEXVOLT BRUSHLESS 3 MODE DEDICATED CORDLESS HAMMER BARE UNIT
$880.00Category-leading high speed drilling performance at more than 66 holes (18mm Ø x 80mm) per charge
Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
Brushless motor for extreme runtime and reduced maintenance
-
DEWALT DCC1054N-XJ 54V XR FLEXVOLT Compressor – Bare Unit
$525.00- First ever 54V Cordless Air Compressor with OneTurn™ Regulator for fast, straightforward set-up and operation
- Powered by the DEWALT® 54V XR® FLEXVOLT battery platform, delivering outstanding cordless power
- Up to 1,220 nails per charge with an 18GA brad finish nailer for a full day’s fastening work with one battery*
-
DEWALT DCD1623N-XJ 18V XR MAGNETIC DRILL WITH PERMANENT MAGNET – Bare Unit
$2,595.00- Maximum drilling capacity of 50 mm with annual cutters
- Brushless Motor provide corded drill performance and can complete 40x20mm Holes on 12 mm Steel per battery Charge (9 AH)
- 2 speed mechanical transmission along with 5 electronic variable speed in order to achieve optimal drilling speed for small and large diameter bits
-
DEWALT DCD470N-XJ 54V XR FLEXVOLT Right Angle Drill – Bare Unit
$835.00- 54V Brushless Motor for increased power and runtime
- Adjustable bail handle and 2-position side handle for safety, leverage and control
- E-Clutch is a Perform and Protect™ feature that detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained.
-
DEWALT DCMPW1600N-XE 2X18V XR BRUSHLESS PRESSURE WASHER
Original price was: $805.00.$749.00Current price is: $749.00.- Completely Cordless cleaning solution – No access to power or mains water required. Powered by 2 x 18V XR Batteries, Self priming functionality means water can be drawn from a bucket or water butt.
- Suitable for cleaning tools, vehicles and site clean ups.
- Brushless motor provides improved run time and durability.
-
DEWALT DCS691X2-XE 54V XR FLEXVOLT 230mm Cut Off Saw Kit
$1,635.00- SUPPLIED WITH 2 X 9AH BATTERIES, CHARGER
- 54V FLEXVOLT Li-Ion battery enables corded performance from a cordless tool
- Durable high power Brushless motor for the toughest applications
- Rotatable guard gives 5 position for improved visibility when cutting in tight spots
-
DEWALT DCS777N-XJ 54V XR FLEXVOLT 216mm Mitre Saw – Bare Unit
$1,139.00- XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity
- 54V motor provides power and runtime for demanding construction applications
- Built on classic pull saw design improved and updated for the modern user
-
DEWALT DW735-XE 330mm Three Knife, Two Speed Portable Thicknesser
$1,729.00- Powerful 1800W motor handles larger cuts in wider materials with ease
- Three knife cutter-head with 10,000 RPM cutter head speed delivers 30% longer knife life and makes knife change faster and easier
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 4m – 8m/min
-
DEWALT DWS777-XE 216mm (8 1/2″) Cross Cut Mitre Saw (XPS)
Original price was: $1,379.00.$1,265.00Current price is: $1,265.00.- The classic saw design improved and updated for the modern user
- New 1800 Watt motor for powerful cutting in all materials
- XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity no adjustment required
-
FESTOOL 168mm Plunge Cut Saw in Systainer with 1400mm Rail-TS60K
$1,587.00Functions
Festool plunge-cut saws have been setting the standard for saws for decades. The TS 60 K is redefining this yet again. In the blink of an eye, the unique KickbackStop protects your workpiece and minimises the risk of injury. Perfectly coordinated with the entire Festool saw system and with a cutting depth of 60 mm.
The most versatile saw of its kind guarantees you premium work results. Of course, this is also the case for mitre cuts and solid worktops.
The TS 60 K now offers the unrivalled opportunity to combine it with the cross-cutting guide rail. In just a few steps, this produces a portable and easy-to-use compound mitre saw system for accurate angle cutting.
Thanks to the latest-generation brushless EC-TEC motor, the compact plunge-cut saw is extremely robust and powerful. It saws like a hot knife through butter, combining precision, flexibility and the highest cutting quality – whilst also offering enhanced safety. The TS 60 K: Worlds apart.
- Safer: The unique KickbackStop reduces the risk of injury caused by kickback during sawing or plunge-cutting into the workpiece
- Dive deeper: Greater cutting depth, at the same size and weight as the TS 55 F
- Versatile: Option to combine with the tried-and-tested guide rails and now with the FSK cross-cutting guide rails too
- Constant: EC-TEC motor in combination with the thin kerf saw blades ensures work progresses quickly whilst requiring less effort
- Precise: Simple, precise and repeatable mitre cuts can be achieved by setting mitre angles from -1° to 47°
- Convenient: The FastFix spindle stop and sophisticated design make it extremely easy to change the saw blade
- Best orientation: A transparent sliding viewing window provides a good view of the saw blade
-
FESTOOL 18V MITRE SAW KSC60 EB Li BASIC Slide Compound In Carton
$2,622.00Cordless Sliding compound saw KAPEX KSC 60
KAPEX KSC 60 E Li BASIC
Technical data
Battery reqd: 18/36V and min 5.2Ah Idle engine speed: 1300-1800/3500 min-1 Saw blade diameter: 216 mm Inclination angle: 47 °/47 ° Cutting depth 90°/90°: 305 x 60 mm Weight:with 2 batteries 18.5 kg Items included
KSC60, HW universal saw blade W36, workpiece clamp, LED spotlight, smart bevel, increase, dust catcher, Allen key 6mm, in a carton