Makita
-
MAKITA DCF301Z 18V LXT 330mm (13″) Jobsite Fan
$NZ245.00- Automatic oscillating fan increases airflow dispersion
- Powered by either 18V LXT batteries or AC power
- Automatic off timer adjustable in 3 stages, 4,2 or 1 hour
- 220m/min maximum wind speed for increased airflow
- Tough design built to withstand conditions on the construction site
- 13.5 hours on low settings when using BL1860B
-
MAKITA DCM501Z 12Vmax CXT / 14.4V / 18V LXT Coffee Maker
$NZ185.00- Powered by either 12V Max or 18V battery
- Compatible with Cafe Pod / Ground Coffee Beans
- Brewing is easy with preground coffee
- Continuous 300W brews a 160mL shot in approximately 5 minutes
- Dedicated sealed coffee cup Also compatible with other mug (up to 90mm height)
- Terminal protection cover
-
MAKITA DCS553Z 18V LXT Brushless 150mm (5-7/8″) Metal Cutter
$NZ499.00- 150mm TCT saw blade delivering 57.5mm cutting depth
- Self-Dust collecting housing reduces scatter of metal chips
- High performance cutting with 4,100rpm no load speed
- Automatic Torque Drive increases torque to power through any cut
- Electric brake for fast yet gentle stopping of blade rotation
-
MAKITA DDA450Z 18V LXT Brushless 13mm Angle Drill
$NZ525.00- Compact and lightweight design at only 434mm in length and 2.9kg skin weight
- Mechanical 2 speed gear box able to drill up to 65mm self feed bits in low speed
- High power brushless motor produces 70Nm max torque in low speed
- High durability 13mm keyed chuck for secure bit retention
- XPT technology that provides increased protection against dust & moisture
-
MAKITA DDF083Z 18V LXT Brushless ¼” Hex Chuck Driver Drill
$NZ259.00- Ultra compact design at just 1.3kg with battery
- Mechanical 2 speed gearing
- 1,700rpm no load speed motor delivers fast driving performance
- XPT technology that protects against dust & moisture
- Twin LED job light with pre glow and after glow function
-
MAKITA DFN350Z 18V LXT 18 Gauge 35mm Brad Nailer
$NZ675.00- Ultra compact and lightweight at only 2.4kg in weight with the 6.0Ah battery
- Counterweight mechanism offsets rebound force for a high quality finish
- Spring drive motor delivers over 4,000 nails runtime on a 6.0Ah battery
- Depth driving adjustment for ideal sinking depth
- 100 nail magazine capacity with remaining nail window
-
MAKITA DFR552Z 18V Brushless Collated Screwdriver skin
$NZ609.00- Brushless Motor delivers 0-4,500rpm with increased torque to handle high demand applications such as fibre cement sheets
- Push Drive Technology -motor starts only when the fastener engages for longer run time and noise reduction
- Adjustable screw length between 25-55mm with fine depth adjustment
- eXtreme Protection Technology (XPT) technology that protects against dust & moisture
- Auto feed housing is designed with a screwless one-touch hook for effortless attachment and removal
-
MAKITA DG001GZ06 40Vmax XGT Brushless Earth Auger skin
$NZ979.00Included accessories
Hex Socket head bolt M8X30 (922453-2), Chuck key S-13 (763251-3), Hex wrench 6 (783204-6), Hex wrench 10 (783207-0), Hex wrench 5 (783232-1), Type B: For Makita BBA520 auger bit (327685-0), Type D: For Husqvarna, Oleo-Mac auger bit (327687-6)
-
MAKITA DGA452Z 18V LXT 115mm (4-½”) Angle Grinder skin
$NZ245.00- Cordless convenience for grinding & cutting applications
- Small circumference motor housing with soft grip for enhanced comfort and control
- Electronic current limiter protects the motor from overload
- Warning lamp turns on to warn of impending overload and also warns of low battery
- Anti-restart function for safety Motor will not start if charged battery is inserted with switch on
DOES NOT INCLUDE BATTERY OR CHARGER
-
Makita DHG181 18V LXT Cordless Heat Gun
$NZ275.00- Temperature control dial with a maximum temperature of 550°C
- 2 stage Air volume settings, High producing 200L/min and low 120L/min
- Lock on trigger switch for easy hands-free operation
- Quick release nozzles, eject hot nozzles without the need to handle hot parts
- Standard nozzles: Glass Protection, Wide Slot, Reflector, and Reduction Nozzles
-
MAKITA DHR171Z 18V LXT Brushless 17mm Rotary Hammer Skin
$NZ285.00- Sub-Compact design ideal for working in tight spaces and overhead applications
- Vibration absorbing handle moves independently of the motor for increased operator comfort
- Brushless motor delivers 1.2J* of impact energy with a maximum 17mm hole capacity
- 2-Mode operation for “Rotation Only” or “Hammering with Rotation” for multiple applications
- Weighs only 2.4kg with battery (battery not included) for reduced operator fatigue
-
MAKITA DHR183Z 18V LXT Brushless 18mm Rotary Hammer – SDS-Plus – SKIN
$NZ345.00- Compact and lightweight for reduced operator fatigue
- 7.7m/s² of vibration thanks to AVT (Anti-Vibration Technology)
- Brushless motor delivers 1.7J* of impact energy with a maximum 18mm hole capacity
- 2-Mode operation for “Rotation Only” or “Hammering with Rotation” for multiple applications
- Compatible with DX16 optional HEPA dust extractor
*Rating in accordance with EPTA 05/2009
-
MAKITA DHR242Z 18V LXT Brushless 24mm Rotary Hammer Skin
$NZ475.00- Dust Extraction adaptor keeps the jobsite clean as you work
- 3-Mode operation: for both drilling and chipping in masonry material
- 2.0J of impact energy for efficient drilling of masonry
- Unique rubber joint suppresses vibration to battery
-
MAKITA DHS680Z 18V LXT Brushless 165mm Circular Saw Skin
$NZ485.00- Max cut capacity of 57mm with up to 50° bevel capacity
- Automatic Torque Drive increases torque to power through any cut
- High cutting performance with up to 5,000rpm no load speed
- Electric brake rapidly slows the blade for added safety
- Blower function blows dust away from cut line for greater visibility
-
MAKITA DJS131Z 18V LXT Brushless 18 Gauge 1.3mm Offset Shear
$NZ805.00- Designed for curved cuts and corrugated roofing in steel up to 1.3mm (18Ga)
- Cutting head is 360° rotatable with 12 stops for comfortable use
- Brushless motor provides increased power and cutting speed at 3,000spm
- XPT provides advanced protection against dust and moisture
- Lock on button for comfortable operation during extended cutting
-
MAKITA DJS200Z 18V LXT Brushless 14 Gauge 2mm Straight Shear
$NZ665.00- Cuts up to 2.0mm (14 gauge) steel and 1.6mm (16 gauge) stainless steel 360° swivel shear head for increased cutting convenience
- Makita built brushless motor delivers 3,000 strokes per minute for faster cutting
- Compact and ergonomic design at only 345mm long
-
MAKITA DJS800Z 18V LXT Brushless 13mm Fibre Cement Shears
$NZ725.00- Cuts up to 13mm (1/2″) cement fiber siding
- 360° swivel shear head for increased cutting convenience
- Makita built BL brushless motor delivers 3,000 strokes per minute for faster cutting
- Compact and ergonomic design at only 379mm long
-
MAKITA DJV180Z 18V LXT D-Handle Jig Saw Skin
$NZ355.00- Tool-less blade change for quick and convenient blade changes
- Variable speed control by trigger for more accurate cutting
- 26mm stroke length at 2,600rpm for rapid cutting
- Blower function blows saw dust off the cutting line
- 3 orbital cut settings & straight cutting to suit each specific application
-
MAKITA DK0209G101 40Vmax Brushless 10-Pc.Combo (4.0Ah) Kit
$NZ4,615.00INSTORE ONLY – NOT ABLE TO BE SHIPPED
INCLUDES:
- HP001GÂ 40Vmax XGT Brushless Hammer Driver Drill
- TD003GÂ 40Vmax XGT Brushless Impact Driver
- HS012G 40Vmax XGT Brushless 165mm (6- ½”) Circular Saw
- GA013GÂ 40Vmax XGT Brushless 125mm (5″) Paddle switch Angle Grinder
- JR001GÂ 40Vmax XGT Brushless Recipro Saw
- AS001GÂ 40Vmax XGT Brushless Dust Blower
- KP001GÂ 40Vmax XGT Brushless 82mm Planer
- RT001GÂ 40Vmax XGT Brushless AWS Laminate Trimmer
- JV001GÂ 40Vmax XGT Brushless Barrel Handle Jigsaw
- HR010GÂ Brushless 20mm Rotary Hammer
- 2x 40Vmax 4.0Ah Battery (BL4040), 40Vmax Dual Rapid Charger (DC40RB), 6-Pc tool bag
-
MAKITA DK0210G801 40Vmax Brushless 8-Pc.Combo (4.0Ah) Kit
$NZ4,139.00AVAILABLE IN STORE ONLY – NOT ABLE TO BE SHIPPED
- HP001GÂ 40Vmax XGT Brushless Hammer Driver Drill
- TD003GÂ 40Vmax XGT Brushless Impact Driver
- HS012G 40Vmax XGT Brushless 165mm (6- ½”) Circular Saw
- GA013GÂ 40Vmax XGT Brushless 125mm (5″) Paddle switch Angle Grinder
- JR001GÂ 40Vmax XGT Brushless Recipro Saw
- AS001GÂ 40Vmax XGT Brushless Dust Blower
- KP001GÂ 40Vmax XGT Brushless 82mm Planer
- RT001GÂ 40Vmax XGT Brushless AWS Laminate Trimmer
-
Makita DKP181 18V LXT Brushless 82mm Planer
$NZ506.00- High powered motor allows maximum 3mm cutting depth Auto-start Wireless System (AWS) for on demand dust extraction *12,000rpm no load speed with Automatic Torque Drive performance *Left or right side chip ejection *Electric brake & foot on base plate protect workpiece from damage
-
MAKITA DLM464PT2 18Vx2 (36V) LXT Brushless 460mm (18″) Metal Deck Lawn Mower kit
$NZ939.00INSTORE ONLY – ITEM NOT ABLE TO BE SHIPPED
DLM464PT2
supplied with 2x 5.0Ah batteries (BL1850) & Dual rapid charger (DC18RD)Included accessories
Box Wrench 17 (782210-8), Grass Catcher (127697-1), Start Key (643535-4), Bar Blade Set and (199367-2) Mulching Plug (671 005 177)
-
MAKITA DLM535PT2 18Vx2 (36V) LXT Brushless 534mm (21″) Metal Deck Lawn Mower kit
$NZ1,579.00INSTORE ONLY – ITEM NOT ABLE TO BE SHIPPED
DLM535PT2
supplied with 2x 5.0Ah batteries (BL1850) & Dual charger (DC18RD)Included accessories
Bar Blade (191D52-7), Mulching Plug (127546-2), Rod (327589-6), Socket Wrench 17 (782210-8), Socket wrench 13 (782212-4), Side Discharge Chute (459887-1)
-
MAKITA DLX2507T 18V LXT Brushless 2-Pc Hammer Drill Driver / Impact Driver (5.0Ah) Kit
$NZ869.00The 18V LXT Brushless 2-Piece Combo Kit (DLX2507T) delivers two premium brushless tools for drilling, driving, and fastening. The Kit includes two 18V LXT 5.0Ah batteries, which are compatible with the full range of Makita tools and products
-
MAKITA DMC300 18V LXT Brushless 76mm Compact Cut Off Saw Skin
$NZ299.00- Active feedback sensors shut down the tool in the event of a kickback
- Forward and reverse rotation for push or pull cutting
- Rapid cutting speed with 20,000rpm for cutting a wide variety of materials
- Advanced safety protection with electric brake and anti-restart
- XPT technology that protects against dust & moisture
-
MAKITA DML807 14.4/18V LXT Dual Purpose LED Lantern Flashlight
$NZ155.00- 360 degree illumination with 20 bright white LED’s
- Up to 23hrs runtime on a 5.0Ah battery
- 1 x 2W LED produces 710lm of brightness
- USB output port, able to charge mobile devices with 2.1A max
- 3 stage LED brightness switch, full, half or single LED
-
MAKITA DML810 18V LXT / AC Wobble light 5,500lm
Original price was: $NZ569.00.$NZ495.00Current price is: $NZ495.00.- Rounded base design to ensure light remains upright even when knocked
- 3 stage brightness settings with Max. 5,500lm LED brightness
- Increased runtime with 2x 18V terminals, up to 18 hours using 2x 6.0Ah batteries
- IP54 rated for protection against dust and moisture*
- Powered by either 18V Li-ion batteries or AC power
*Only when being used with 18V batteries not AC power
-
MAKITA DMP181Z 18V LXT 161psi Inflator
$NZ305.00- 161psi maximum air pressure for inflating a wide variety of equipment
- Large digital backlit display, shows current and target air pressure
- Decompression function for reducing the current air pressure
- High discharge volume at 22L/min for fast inflation times
- Auto-stop function, inflator shuts down once target pressure is achieved
*Duty cycle 10 minutes ON / 5 minutes OFF
-
MAKITA DMR057 18V LXT Bluetooth Radio Lantern Flashlight
$NZ255.00Specifications
Lumens – Hi 310lm – Low 155lm – With battery BL1860B – Worklight 19hrs – Radio 63hrs – Worklight & Radio 14hrs Frequency band – AM – – FM 87.5-108 MHz – DAB – Overall dimensions 289mm (BL1860B) Net weight (skin) 0.98kg Max power output 3.0W Voltage 18V -
MAKITA DPJ180Z 18V LXT Plate Joiner tool only
$NZ395.00NO BATTERY SUPPLIED, TOOL ONLY
- 20mm max cut capacity with 6 pre-set cutting depths
- Angle adjustable fence lockable in any position between 0 and 90
- 6,500rpm no load speed delivers high performance cutting
- Electronic current limiter for overload protection
- Anti-restart function with warning lamp for safety
- Connects directly to Makita extractors VC2510/VC3210
-
MAKITA DPO600Z 18V LXT Brushless 150mm (6″) Random Orbit Polisher
$NZ645.00- Dual mode: random orbit with forced rotation / random orbit
- Elastomer bumper on gear housing for work piece protection
- Brushless motor provides 0-6,800opm with a 5.5mm orbit diameter
- Variable speed control via trigger and pre-set dial
- Constant speed control and soft start for smooth operation
-
MAKITA DPV300Z 18V LXT Brushless Sander & Polisher skin
$NZ385.00- Large capacity of 80mm for polishing and 50mm for sanding
- Compact design for comfortable use in narrow work spaces
- XPT technology enhanced protection against dust & moisture
- 2 speed selection Polishing: 0 – 2800 and Sanding: 0 – 9500
- Elastomer bumper on gear housing for work piece protection
-
MAKITA DSD180Z 18V LXT Drywall Saw
$NZ405.00- Variable speed control trigger
- Excellent manoeuvrability acheived by the well balance design, allows for easy overhead application
- Base cover protects material from damage
- Dust box is designed to catch dust in overhead application or be connected to dust extraction
- LED joblight
-
MAKITA DSP601ZJ 18Vx2 (36V) LXT Brushless 165mm (6-½”) Plunge Cut Saw skin
$NZ1,089.00- Maximum cutting capacity of 56mm with a -1° to 48° bevel capacity
- Automatic torque drive increases torque to power through any cut
- Smooth cutting performance with up to 6,300rpm no load speed
- Variable speed with soft start and electric brake
- Auto-start Wireless System (AWS) for on demand dust extraction
- note: AWS Chip not included
-
MAKITA DTD171Z 18V LXT Brushless 4-Stage Impact Driver skin
$NZ459.00- 4 stage impact selection plus two T-modes, A-mode and bolt mode
- On the go single hand impact selection button
- Impressive 180Nm of max. fastening torque
- XPT technology enhances dust and moisture protection
- Ultra compact design with twin dual side LEDs
-
MAKITA DTM51Z 18V LXT Multi Tool
$NZ379.00- Tool-less accessory clamp for quick installation and replacement
- 12 angle setting of accessories at every 30°from 0°to 360°
- Variable speed control by dial
- Battery capacity warning lamp
- Anti-restart function prevents accidental start-up
- Accepts OIS – Makita & Bosch accessories
-
MAKITA DTM52ZX3 18V LXT Brushless Multi Tool StarlockMax
$NZ429.00- Tool-less accessory changes with lever locking system
- Compatible with STARLOCK / StarlockMax
- Variable speed dial 10,000 – 20,000 OPM no load speed for versatile performance
- 12 angle settings of accessories at every 30° from 0° to 360°
- 2.5m/s² or less of vibration thanks to AVT (Anti-Vibration Technology)
- Small and easy to grip 169mm diametre barrel grip for comfortable and improved handling
-
MAKITA DTW1002Z 18V LXT Brushless ½” Impact Wrench skin
$NZ605.00- Unique rubber joint suppress vibration to battery terminals
- 3 Stage power selection for optimum rpm and fastening torque
- Most powerful in its class with 1,600Nm of nut busting torque
- Twin LED job light with pre glow and after glow function
- Durable hammer case for maximum reliability
Included accessories
Belt hook (346949-3)
-
MAKITA DTW700Z 18V LXT Brushless ½” Impact Wrench
$NZ505.00- Compact design for comfortable handling at only 170mm in length
- 4 Stage power selection for optimum rpm and fastening torque
- Maximum nut busting torque of 1,000Nm with 700Nm max. fastening -, Hard: 320Nm, Med: 200Nm, Soft: 150Nm
- Unique rubber joint suppress vibration to battery terminals
- Forward & reverse auto stop function, optimised for fastening applications
-
MAKITA DUB184RT 18V LXT Brushless Blower Kit
$NZ535.00Specifications
Max air volume  459 CFM – Max 13.0m³/min Max velocity – Max 187km/h Max blowing force 11N No load speed 0-18,000rpm Overall dimensions 824mm Net weight (skin) 2.4kg Sound Level 96dB(A) Voltage 18V Continuous Run-time Up to 12 minutes with 6.0Ah battery -
MAKITA DUN500WZ 18V LXT Brushless 500mm Articulating Pole Hedge Trimmer skin
$NZ655.00- 3-speed Brushless motor delivers 4,400 SPM for faster cutting
- Easy and quick adjustment to 45° tilt-up to 70° tilt-down, with 6 angle settings and can be folded 180° for easy transport and storage
- The triple-edged / Double sided cutting blades allows for optimum smooth cutting performance
- Well balanced design and lightweight at 4.3 kgs* (1 x 6.0Ah)
-
MAKITA DUS108Z 18V LXT 10L Backpack Sprayer skin
$NZ429.00- 10L tank with ergonomic backpack design
- 600mm lance with dual cone and flat fan nozzles
- Up to 335mins continuous operation on a 5.0Ah battery*
- Lock on lever for minimal hand fatigue
- Battery fuel gauge to monitor remaining capacity
*5.5 hours Dual nozzle, 7.6 hours Fan nozzle
-
MAKITA DUS158Z 18V LXT 15L Backpack Sprayer skin
$NZ469.00- 15L tank with ergonomic backpack design
- 600mm lance with dual cone and flat fan nozzles
- Up to 4.5 hours continuous operation on a 3.0Ah battery*
- Lock on lever for minimal hand fatigue
- Battery fuel gauge to monitor remaining capacity
*4.5 hours Dual nozzle, 3.3 hours Fan nozzle
-
MAKITA DVC750LZX1 18V LXT Brushless Wet/Dry Dust Extractor
$NZ395.00- 2 Stage power selection for optimum suction performance
- Approved for dust class L of EC regulation
- 7.5L Tank capacity with HEPA filter
- 6.7kPa Max sealed air suction
- Compact and lightweight at 4.6kg with battery
- Up to 35 minutes runtime on high power selection
-
MAKITA E-05169 3 Pouch Tool Belt Set
Original price was: $NZ216.30.$NZ179.00Current price is: $NZ179.00.- Three Pouches, five pockets, thirty holders
- Pouches retain their shape thanks to 3L Technology
- Keeps all your fixings and tools accessible – just around your waist
- Five capacious pockets for all your stuff
- Six leather holders for real strength and durability
- Two Belt Loop Holders included
- Ten elastic loops for easy access to tools and additional screwdrivers outside the pockets
Length: 640mm Width: 145mm Height: 270mm Weight: 1.34kg
-
MAKITA E-18954 Impact XPS ¼” x50mm Socket Adapter
$NZ8.90Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS ¼” Square 150mm Socket Adapters are designed exclusively for use with high-torque impact drivers. Chamfered edges of the square drive end allows for easy installation. The high quality steel construction provides increased durability and features a matte nickel surface for best in class corrosion resistance
- Ideal for use with high torque impact drivers and driver-drills
- Chamfered edges of square drive end allow easy installation socket
- Calibrated heat treating process for added durability
- Matte Nickel surface for best in class corrosion resistance
-
MAKITA EFFICUT 165mm Multi-Purpose Blade
Original price was: $NZ129.60.$NZ99.00Current price is: $NZ99.00.E-16776 (165mm x 20mm x 54T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.5mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 35% More Efficient compared to (B-56823)
- 35% More cuts per charge compared to (B-56823)
- Centre/Arbor – 20mm
- Bush – 15.88mm
-
MAKITA EFFICUT 185mm Multi-Purpose Blade
Original price was: $NZ123.90.$NZ105.00Current price is: $NZ105.00.E-16829 (185mm x 20mm x 60T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.7mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 100% More Efficient compared to (B-15578)
- 100% More cuts per charge compared to (B-15578)
- Centre/Arbor – 20mm
- Bush – 15.88mm
-
MAKITA EFFICUT 190mm Multi-Purpose Blade
Original price was: $NZ154.20.$NZ135.00Current price is: $NZ135.00.E-16879 (190mm x 20mm x 60T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.7mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 50% More Efficient compared to (B-15615)
- 50% More cuts per charge compared to (B-15615)
-
MAKITA EFFICUT 260mm Multi-Purpose Blade
Original price was: $NZ225.00.$NZ199.00Current price is: $NZ199.00.E-07288 (260mm x 30mm x 81T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.85mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 36% More Efficient compared to (B-15637) Aluminium Blade
- 103% More cuts per charge compared to (B-15637) Aluminium Blade
- Centre/Arbor – 30mm
- Bush – 25.4mm
-
MAKITA EFFICUT 305mm Multi-Purpose Blade
Original price was: $NZ224.10.$NZ199.00Current price is: $NZ199.00.E-13269 – 305mm x 30 x 81T
20% Faster Cut Speed compared to (B-15671) Aluminium Blade
- Centre/Arbor – 30mm
- Bush – 25.4mm
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.65mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
-
MAKITA FN001GZ 40Vmax XGT Brushless 18 Gauge Brad Nailer skin
$NZ725.00Included accessories
Hex wrench (783201-2), Nose adaptor S (422665-2), Clip (346317-0), Screw M4x12 (251314-2)
Optional accessories
18Ga C1 Brad Nail 15mm Length (F-31867)
18Ga C1 Brad Nail 20mm Length (F-31870)
18Ga C1 Brad Nail 25mm Length (F-31883)
18Ga C1 Brad Nail 30mm Length (F-31896) -
MAKITA GA5040C 125mm 1,400W Variable Speed Angle Grinder
$NZ345.00- Super Joint System II developed for effective vibration absorption
- Electronic current limiter, speed control and soft start
- Anti-restart function
- Re-designed durable gear housing
- Ergonomically best possible barrel grip
- Variable speed
-
MAKITA GA9040SK01 230mm (9″) 2,300W Angle Grinder
$NZ525.00- Low vibration rear handle & rubberised soft-grip enhances operator comfort and control
- Superior anti-dust, and labyrinthal bearing-protective construction
- Powerful 2,300W motor
- Quality machined bevel gears
- Increased heat resistance with increased varnish to windings
-
MAKITA Guide Rail 1.4M (194368-5)
Original price was: $NZ202.50.$NZ175.00Current price is: $NZ175.00.The Makita 1.4M Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts
- 1,400mm guide rail for use with Makita Plunge Saw models
- Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
- Ideal for ripping sheet material
- Alternate use with select routers and circular saws, must use with router guide rail adaptor (194579-2) and saw guide rail adaptor (196953-0)
-
MAKITA GUIDE RAIL Adaptor (198673-2) – DCC501
$NZ46.50A guide rail system is a more portable solution for precision cutting, so get the right accessories for use with your Makita 1.4M and 3.0M guide rails. The Guide Rail Adapter (198673-2) is an innovative solution for accurate cutting when used with the Makita 125mm (5″) Masonry Saw models (DCC501,4100NH2ZX, 4100NH3ZX) and Guide Rails (saw and rails sold separately). The Guide Rail Adapter installs quickly and easily, and is engineered with quality materials for long service life
- Precision design for accurate cutting
- Quick and easy to install for added user convenience
- Compatible with Makita 1.4M (194368-5), 3.0M (194367-7) as well as select competitor rails
-
MAKITA Guide Rail Connector Set Twin Pack (198885-7)
Original price was: $NZ74.20.$NZ65.00Current price is: $NZ65.00.The Makita 198885-7 Guide Rail Connectors (x2 in this twin pack) are designed to join guide rails together to allow the user to make longer cuts while maintaining the accuracy they desire. The connectors install quickly for added convenience. These versatile connectors work with Makita guide rails as well as select competitor rails (please check compatibility before purchase). Makita recommends the use of x2 joining bars to securely join x2 guiderails
-
MAKITA Guide rail Quick Clamp Set (199826-6)
Original price was: $NZ207.90.$NZ175.00Current price is: $NZ175.00.The Makita 2-Pc. Clamp Set (199826-6) is engineered for use with the Makita Corded and Cordless Plunge Circular Saws and one of the Makita Guide Rails (199140-0,194925-9, E-10936 ). The clamp set is engineered to hold the guide rail securely in place. the result is a more portable option to a table saw for ripping sheet material
- Quick fix clamps to suit SP6000, DSP600 and DSP601
- Designed to clamp material to guide rail allowing a more secure working environment
- Conveniently adjustable for securing varying sized material
- Quick fix and release system
- Easy to use ratcheting
- Adjustable Length with max 150mm clamping
-
MAKITA HP001GZ 40Vmax XGT Brushless Hammer Drill Driver
$NZ469.00- Heavy duty power with 141Nm peak torque
- Active Feedback Technology – sensors shut down the tool in the event of a kickback
- Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
- 35% faster drilling speed compared with the equivalent 18V model
- Electronic clutch for selecting between 41 torque range settings
-
MAKITA HR010GZ 40Vmax XGT Brushless 20mm Rotary Hammer skin
$NZ485.00- Compact & lightweight design ideal for working in tight and overhead applications
- Anti-Vibration Technology (AVT) provides extremely low vibration
- 2.1J* of impact energy deliver rapid drilling speeds
- Constant speed control maintains drilling speed under load
- 3-Mode operation for “Rotation Only” or “Hammering with Rotation” or “Hammer Only” for multiple applications
- AWS receiver and Dust extraction adapter sold separately **Rating in accordance with EPTA 05/2009
-
MAKITA HR2652 26mm SDS-Plus HEPA Rotary Hammer
$NZ615.00- 3 mode operation: Rotation only, Rotation and Hammering
- Built in dust extractor equipt with HEPA filter
- 800W motor providing 2.2J** of hitting energy
- 12.5m/s² of vibration Hammer Drilling into Concrete
- ** Rating in accordance with EPTA 05/2009
-
MAKITA HR3011FC 30mm SDS-Plus Rotary Hammer with DX10
$NZ859.00- 3 mode operation: Rotation only, Rotation and Hammering, Hammering
- Only 9.5m/s² of vibration thanks to AVT (Anti-Vibration Technology)
- High 1,050W* motor provides 3.9J * of hitting energy
- Variable speed by dial with constant speed control
- Torque limiter protects tool and operator if the bit should jam
-
MAKITA HS012GZ 40Vmax XGT Brushless 165mm (6- ½”) Circular Saw
$NZ549.00- Heavy duty power cutting 40% faster than the 18V equivalent model
- Max cut capacity of up to 57mm with 50° bevel capacity, 22.5°, 45° positive stops
- Constant speed control maintains cutting speed under heavy load
- Compatible with AWS* for wireless connectivity with compatible dust extraction
- Die-cast magnesium base, blade guard, and blade cover provide a lightweight design
*Requires optional wireless transmitter
-
MAKITA IMPACT X Screwdriver Bit Set – 35 PC
Original price was: $NZ46.00.$NZ30.00Current price is: $NZ30.00.MAKITA® IMPACT-X™ is a line of impact-rated insert bits and fastening accessories built specifically for the demands of the professional tradesman. Professionals require commercial duty bits and fastening accessories that can endure the force of high-volume screw driving applications with high torque impact drivers. Standard screwdriving bits are brittle and fit poorly into fasteners, and in applications with high torque impact drivers this losing combo quickly leads to broken bits.
IMPACT-Xâ„¢ hits back with improved fitment and increased performance with high torque impact drivers. Precision machined (not forged) tips ensure full contact fit, while performance-optimized and heat-treated S2 steel provides more flex and more durability than standard, brittle bits.
Features
- IMPACT-Xâ„¢ Bits:
-
- Precision Machined Tips with superior fitment – For full contact fit and longer life
- Performance-Optimized S2 Steel Construction – For extended life
- Calibrated Heat Treating Process – For added durability
- Manganese Phosphate Surface – For advanced corrosion resistance
- Optimal Tip Geometry – For an ideal fit and improved holding power
-
- XPANDÂ Storage System:
-
- Removable Storage Bars – Enables customisation of contents
- Rotatable Bit Keepers – Rotate up to 90° for easier bit removal
- Centre Storage Tube – Holds additional bits (up to 50 x Insert Bits)
-
- IMPACT-Xâ„¢ Bits:
-
MAKITA Impact XPS #1 Square 75mm Power Bit, 2/pk (E-18677)
$NZ11.00Precision machined tips, torque absorbing power rings, an optimized torsion zone, and high quality steel combine to deliver improved overall performance and bit life
Lasts up to 100X longer than standard impact bits
Precision machined tips provide a superior full contact fit for improved holding power and longer life
Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
Heat treating process precisely calibrated for added durability
Matte Nickel surface for best in class corrosion resistance
Premium, high-grade steel composition is masterfully engineered for extended life
Laser etched for easy size identification
Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
For use with high torque impact drivers and driver-drills -
MAKITA Impact XPS #2 Pozi x 50mm Power Bit, 3/pk (E-19370)
$NZ9.10FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
Product Type : Power Bits
Tip Size : PH2
Shank Type : 1/4″ Hex
Overall length: 50mm
Package Quantity: 3pcs -
MAKITA Impact XPS #8 Slotted x 50mm Power Bit, 3/pk (E-19342)
$NZ7.60FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
Product Type : Power Bits
Tip Size : #8
Bit Fitment : Slotted
Shank Type : 1/4″ Hex
Overall length: 50mm
Package Quantity: 3pcs
