Makita
-
MAKITA DLX2507T 18V LXT Brushless 2-Pc Hammer Drill Driver / Impact Driver (5.0Ah) Kit
The 18V LXT Brushless 2-Piece Combo Kit (DLX2507T) delivers two premium brushless tools for drilling, driving, and fastening. The Kit includes two 18V LXT 5.0Ah batteries, which are compatible with the full range of Makita tools and products
-
MAKITA DMC300 18V LXT Brushless 76mm Compact Cut Off Saw Skin
- Active feedback sensors shut down the tool in the event of a kickback
- Forward and reverse rotation for push or pull cutting
- Rapid cutting speed with 20,000rpm for cutting a wide variety of materials
- Advanced safety protection with electric brake and anti-restart
- XPT technology that protects against dust & moisture
-
MAKITA DML807 14.4/18V LXT Dual Purpose LED Lantern Flashlight
- 360 degree illumination with 20 bright white LED’s
- Up to 23hrs runtime on a 5.0Ah battery
- 1 x 2W LED produces 710lm of brightness
- USB output port, able to charge mobile devices with 2.1A max
- 3 stage LED brightness switch, full, half or single LED
-
MAKITA DML810 18V LXT / AC Wobble light 5,500lm
- Rounded base design to ensure light remains upright even when knocked
- 3 stage brightness settings with Max. 5,500lm LED brightness
- Increased runtime with 2x 18V terminals, up to 18 hours using 2x 6.0Ah batteries
- IP54 rated for protection against dust and moisture*
- Powered by either 18V Li-ion batteries or AC power
*Only when being used with 18V batteries not AC power
-
MAKITA DMP181Z 18V LXT 161psi Inflator
- 161psi maximum air pressure for inflating a wide variety of equipment
- Large digital backlit display, shows current and target air pressure
- Decompression function for reducing the current air pressure
- High discharge volume at 22L/min for fast inflation times
- Auto-stop function, inflator shuts down once target pressure is achieved
*Duty cycle 10 minutes ON / 5 minutes OFF
-
MAKITA DMR057 18V LXT Bluetooth Radio Lantern Flashlight
Specifications
Lumens – Hi 310lm – Low 155lm – With battery BL1860B – Worklight 19hrs – Radio 63hrs – Worklight & Radio 14hrs Frequency band – AM – – FM 87.5-108 MHz – DAB – Overall dimensions 289mm (BL1860B) Net weight (skin) 0.98kg Max power output 3.0W Voltage 18V -
MAKITA DPJ180Z 18V LXT Plate Joiner tool only
NO BATTERY SUPPLIED, TOOL ONLY
- 20mm max cut capacity with 6 pre-set cutting depths
- Angle adjustable fence lockable in any position between 0 and 90
- 6,500rpm no load speed delivers high performance cutting
- Electronic current limiter for overload protection
- Anti-restart function with warning lamp for safety
- Connects directly to Makita extractors VC2510/VC3210
-
MAKITA DPO600Z 18V LXT Brushless 150mm (6″) Random Orbit Polisher
- Dual mode: random orbit with forced rotation / random orbit
- Elastomer bumper on gear housing for work piece protection
- Brushless motor provides 0-6,800opm with a 5.5mm orbit diameter
- Variable speed control via trigger and pre-set dial
- Constant speed control and soft start for smooth operation
-
MAKITA DPV300Z 18V LXT Brushless Sander & Polisher skin
- Large capacity of 80mm for polishing and 50mm for sanding
- Compact design for comfortable use in narrow work spaces
- XPT technology enhanced protection against dust & moisture
- 2 speed selection Polishing: 0 – 2800 and Sanding: 0 – 9500
- Elastomer bumper on gear housing for work piece protection
-
MAKITA DSD180Z 18V LXT Drywall Saw
- Variable speed control trigger
- Excellent manoeuvrability acheived by the well balance design, allows for easy overhead application
- Base cover protects material from damage
- Dust box is designed to catch dust in overhead application or be connected to dust extraction
- LED joblight
-
MAKITA DSP601ZJ 18Vx2 (36V) LXT Brushless 165mm (6-½”) Plunge Cut Saw skin
- Maximum cutting capacity of 56mm with a -1° to 48° bevel capacity
- Automatic torque drive increases torque to power through any cut
- Smooth cutting performance with up to 6,300rpm no load speed
- Variable speed with soft start and electric brake
- Auto-start Wireless System (AWS) for on demand dust extraction
- note: AWS Chip not included
-
MAKITA DTD171Z 18V LXT Brushless 4-Stage Impact Driver skin
- 4 stage impact selection plus two T-modes, A-mode and bolt mode
- On the go single hand impact selection button
- Impressive 180Nm of max. fastening torque
- XPT technology enhances dust and moisture protection
- Ultra compact design with twin dual side LEDs
-
MAKITA DTD173Z 18V LXT Brushless 4-Speed Impact Driver Skin
- LED ring light behind collet for maximum workpiece illumination
- 180Nm max. torque
- 3,600 max RPM and 3,800 max IPM
- 4 stage impact selection plus two Tek Screw modes, Wood mode and Bolt mode
- XPT technology enhances dust and moisture protection
-
MAKITA DTM51Z 18V LXT Multi Tool
- Tool-less accessory clamp for quick installation and replacement
- 12 angle setting of accessories at every 30°from 0°to 360°
- Variable speed control by dial
- Battery capacity warning lamp
- Anti-restart function prevents accidental start-up
- Accepts OIS – Makita & Bosch accessories
-
MAKITA DTM52ZX3 18V LXT Brushless Multi Tool StarlockMax
- Tool-less accessory changes with lever locking system
- Compatible with STARLOCK / StarlockMax
- Variable speed dial 10,000 – 20,000 OPM no load speed for versatile performance
- 12 angle settings of accessories at every 30° from 0° to 360°
- 2.5m/s² or less of vibration thanks to AVT (Anti-Vibration Technology)
- Small and easy to grip 169mm diametre barrel grip for comfortable and improved handling
-
MAKITA DTW1002Z 18V LXT Brushless ½” Impact Wrench skin
- Unique rubber joint suppress vibration to battery terminals
- 3 Stage power selection for optimum rpm and fastening torque
- Most powerful in its class with 1,600Nm of nut busting torque
- Twin LED job light with pre glow and after glow function
- Durable hammer case for maximum reliability
Included accessories
Belt hook (346949-3)
-
MAKITA DTW700Z 18V LXT Brushless ½” Impact Wrench
- Compact design for comfortable handling at only 170mm in length
- 4 Stage power selection for optimum rpm and fastening torque
- Maximum nut busting torque of 1,000Nm with 700Nm max. fastening -, Hard: 320Nm, Med: 200Nm, Soft: 150Nm
- Unique rubber joint suppress vibration to battery terminals
- Forward & reverse auto stop function, optimised for fastening applications
-
MAKITA DUB184RT 18V LXT Brushless Blower Kit
Specifications
Max air volume 459 CFM – Max 13.0m³/min Max velocity – Max 187km/h Max blowing force 11N No load speed 0-18,000rpm Overall dimensions 824mm Net weight (skin) 2.4kg Sound Level 96dB(A) Voltage 18V Continuous Run-time Up to 12 minutes with 6.0Ah battery -
MAKITA DUN500WZ 18V LXT Brushless 500mm Articulating Pole Hedge Trimmer skin
- 3-speed Brushless motor delivers 4,400 SPM for faster cutting
- Easy and quick adjustment to 45° tilt-up to 70° tilt-down, with 6 angle settings and can be folded 180° for easy transport and storage
- The triple-edged / Double sided cutting blades allows for optimum smooth cutting performance
- Well balanced design and lightweight at 4.3 kgs* (1 x 6.0Ah)
-
MAKITA DUS108Z 18V LXT 10L Backpack Sprayer skin
- 10L tank with ergonomic backpack design
- 600mm lance with dual cone and flat fan nozzles
- Up to 335mins continuous operation on a 5.0Ah battery*
- Lock on lever for minimal hand fatigue
- Battery fuel gauge to monitor remaining capacity
*5.5 hours Dual nozzle, 7.6 hours Fan nozzle
-
MAKITA DUS158Z 18V LXT 15L Backpack Sprayer skin
- 15L tank with ergonomic backpack design
- 600mm lance with dual cone and flat fan nozzles
- Up to 4.5 hours continuous operation on a 3.0Ah battery*
- Lock on lever for minimal hand fatigue
- Battery fuel gauge to monitor remaining capacity
*4.5 hours Dual nozzle, 3.3 hours Fan nozzle
-
MAKITA DVC750LZX1 18V LXT Brushless Wet/Dry Dust Extractor
- 2 Stage power selection for optimum suction performance
- Approved for dust class L of EC regulation
- 7.5L Tank capacity with HEPA filter
- 6.7kPa Max sealed air suction
- Compact and lightweight at 4.6kg with battery
- Up to 35 minutes runtime on high power selection
-
MAKITA E-05169 3 Pouch Tool Belt Set
- Three Pouches, five pockets, thirty holders
- Pouches retain their shape thanks to 3L Technology
- Keeps all your fixings and tools accessible – just around your waist
- Five capacious pockets for all your stuff
- Six leather holders for real strength and durability
- Two Belt Loop Holders included
- Ten elastic loops for easy access to tools and additional screwdrivers outside the pockets
Length: 640mm Width: 145mm Height: 270mm Weight: 1.34kg
-
MAKITA E-18954 Impact XPS ¼” x50mm Socket Adapter
Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS ¼” Square 150mm Socket Adapters are designed exclusively for use with high-torque impact drivers. Chamfered edges of the square drive end allows for easy installation. The high quality steel construction provides increased durability and features a matte nickel surface for best in class corrosion resistance
- Ideal for use with high torque impact drivers and driver-drills
- Chamfered edges of square drive end allow easy installation socket
- Calibrated heat treating process for added durability
- Matte Nickel surface for best in class corrosion resistance
-
MAKITA EFFICUT 165mm Multi-Purpose Blade
E-16776 (165mm x 20mm x 54T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.5mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 35% More Efficient compared to (B-56823)
- 35% More cuts per charge compared to (B-56823)
- Centre/Arbor – 20mm
- Bush – 15.88mm
-
MAKITA EFFICUT 185mm Multi-Purpose Blade
E-16829 (185mm x 20mm x 60T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.7mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 100% More Efficient compared to (B-15578)
- 100% More cuts per charge compared to (B-15578)
- Centre/Arbor – 20mm
- Bush – 15.88mm
-
MAKITA EFFICUT 190mm Multi-Purpose Blade
E-16879 (190mm x 20mm x 60T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.7mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 50% More Efficient compared to (B-15615)
- 50% More cuts per charge compared to (B-15615)
-
MAKITA EFFICUT 260mm Multi-Purpose Blade
E-07288 (260mm x 30mm x 81T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.85mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 36% More Efficient compared to (B-15637) Aluminium Blade
- 103% More cuts per charge compared to (B-15637) Aluminium Blade
- Centre/Arbor – 30mm
- Bush – 25.4mm
-
MAKITA EFFICUT 305mm Multi-Purpose Blade
E-13269 – 305mm x 30 x 81T
20% Faster Cut Speed compared to (B-15671) Aluminium Blade
- Centre/Arbor – 30mm
- Bush – 25.4mm
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.65mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
-
MAKITA FN001GZ 40Vmax XGT Brushless 18 Gauge Brad Nailer skin
Included accessories
Hex wrench (783201-2), Nose adaptor S (422665-2), Clip (346317-0), Screw M4x12 (251314-2)
Optional accessories
18Ga C1 Brad Nail 15mm Length (F-31867)
18Ga C1 Brad Nail 20mm Length (F-31870)
18Ga C1 Brad Nail 25mm Length (F-31883)
18Ga C1 Brad Nail 30mm Length (F-31896) -
MAKITA GA9040SK01 230mm (9″) 2,300W Angle Grinder
- Low vibration rear handle & rubberised soft-grip enhances operator comfort and control
- Superior anti-dust, and labyrinthal bearing-protective construction
- Powerful 2,300W motor
- Quality machined bevel gears
- Increased heat resistance with increased varnish to windings
-
MAKITA Guide Rail 1.4M (194368-5)
The Makita 1.4M Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts
- 1,400mm guide rail for use with Makita Plunge Saw models
- Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
- Ideal for ripping sheet material
- Alternate use with select routers and circular saws, must use with router guide rail adaptor (194579-2) and saw guide rail adaptor (196953-0)
-
MAKITA GUIDE RAIL Adaptor (198673-2) – DCC501
A guide rail system is a more portable solution for precision cutting, so get the right accessories for use with your Makita 1.4M and 3.0M guide rails. The Guide Rail Adapter (198673-2) is an innovative solution for accurate cutting when used with the Makita 125mm (5″) Masonry Saw models (DCC501,4100NH2ZX, 4100NH3ZX) and Guide Rails (saw and rails sold separately). The Guide Rail Adapter installs quickly and easily, and is engineered with quality materials for long service life
- Precision design for accurate cutting
- Quick and easy to install for added user convenience
- Compatible with Makita 1.4M (194368-5), 3.0M (194367-7) as well as select competitor rails
-
MAKITA Guide Rail Connector Set Twin Pack (198885-7)
The Makita 198885-7 Guide Rail Connectors (x2 in this twin pack) are designed to join guide rails together to allow the user to make longer cuts while maintaining the accuracy they desire. The connectors install quickly for added convenience. These versatile connectors work with Makita guide rails as well as select competitor rails (please check compatibility before purchase). Makita recommends the use of x2 joining bars to securely join x2 guiderails
-
MAKITA Guide rail Quick Clamp Set (199826-6)
The Makita 2-Pc. Clamp Set (199826-6) is engineered for use with the Makita Corded and Cordless Plunge Circular Saws and one of the Makita Guide Rails (199140-0,194925-9, E-10936 ). The clamp set is engineered to hold the guide rail securely in place. the result is a more portable option to a table saw for ripping sheet material
- Quick fix clamps to suit SP6000, DSP600 and DSP601
- Designed to clamp material to guide rail allowing a more secure working environment
- Conveniently adjustable for securing varying sized material
- Quick fix and release system
- Easy to use ratcheting
- Adjustable Length with max 150mm clamping
-
MAKITA HP001GZ 40Vmax XGT Brushless Hammer Drill Driver
- Heavy duty power with 141Nm peak torque
- Active Feedback Technology – sensors shut down the tool in the event of a kickback
- Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
- 35% faster drilling speed compared with the equivalent 18V model
- Electronic clutch for selecting between 41 torque range settings
-
MAKITA HR010GZ 40Vmax XGT Brushless 20mm Rotary Hammer skin
- Compact & lightweight design ideal for working in tight and overhead applications
- Anti-Vibration Technology (AVT) provides extremely low vibration
- 2.1J* of impact energy deliver rapid drilling speeds
- Constant speed control maintains drilling speed under load
- 3-Mode operation for “Rotation Only” or “Hammering with Rotation” or “Hammer Only” for multiple applications
- AWS receiver and Dust extraction adapter sold separately **Rating in accordance with EPTA 05/2009
-
MAKITA HR3011FC 30mm SDS-Plus Rotary Hammer with DX10
- 3 mode operation: Rotation only, Rotation and Hammering, Hammering
- Only 9.5m/s² of vibration thanks to AVT (Anti-Vibration Technology)
- High 1,050W* motor provides 3.9J * of hitting energy
- Variable speed by dial with constant speed control
- Torque limiter protects tool and operator if the bit should jam
-
MAKITA HS012GZ 40Vmax XGT Brushless 165mm (6- ½”) Circular Saw
- Heavy duty power cutting 40% faster than the 18V equivalent model
- Max cut capacity of up to 57mm with 50° bevel capacity, 22.5°, 45° positive stops
- Constant speed control maintains cutting speed under heavy load
- Compatible with AWS* for wireless connectivity with compatible dust extraction
- Die-cast magnesium base, blade guard, and blade cover provide a lightweight design
*Requires optional wireless transmitter
