Makita
-
MAKITA DMC300 18V LXT Brushless 76mm Compact Cut Off Saw Skin
- Active feedback sensors shut down the tool in the event of a kickback
- Forward and reverse rotation for push or pull cutting
- Rapid cutting speed with 20,000rpm for cutting a wide variety of materials
- Advanced safety protection with electric brake and anti-restart
- XPT technology that protects against dust & moisture
-
MAKITA DML807 14.4/18V LXT Dual Purpose LED Lantern Flashlight
- 360 degree illumination with 20 bright white LED’s
- Up to 23hrs runtime on a 5.0Ah battery
- 1 x 2W LED produces 710lm of brightness
- USB output port, able to charge mobile devices with 2.1A max
- 3 stage LED brightness switch, full, half or single LED
-
MAKITA DML810 18V LXT / AC Wobble light 5,500lm
- Rounded base design to ensure light remains upright even when knocked
- 3 stage brightness settings with Max. 5,500lm LED brightness
- Increased runtime with 2x 18V terminals, up to 18 hours using 2x 6.0Ah batteries
- IP54 rated for protection against dust and moisture*
- Powered by either 18V Li-ion batteries or AC power
*Only when being used with 18V batteries not AC power
-
MAKITA DMP181Z 18V LXT 161psi Inflator
- 161psi maximum air pressure for inflating a wide variety of equipment
- Large digital backlit display, shows current and target air pressure
- Decompression function for reducing the current air pressure
- High discharge volume at 22L/min for fast inflation times
- Auto-stop function, inflator shuts down once target pressure is achieved
*Duty cycle 10 minutes ON / 5 minutes OFF
-
MAKITA DMR057 18V LXT Bluetooth Radio Lantern Flashlight
Specifications
Lumens – Hi 310lm – Low 155lm – With battery BL1860B – Worklight 19hrs – Radio 63hrs – Worklight & Radio 14hrs Frequency band – AM – – FM 87.5-108 MHz – DAB – Overall dimensions 289mm (BL1860B) Net weight (skin) 0.98kg Max power output 3.0W Voltage 18V -
MAKITA DPJ180Z 18V LXT Plate Joiner tool only
NO BATTERY SUPPLIED, TOOL ONLY
- 20mm max cut capacity with 6 pre-set cutting depths
- Angle adjustable fence lockable in any position between 0 and 90
- 6,500rpm no load speed delivers high performance cutting
- Electronic current limiter for overload protection
- Anti-restart function with warning lamp for safety
- Connects directly to Makita extractors VC2510/VC3210
-
MAKITA DPO600Z 18V LXT Brushless 150mm (6″) Random Orbit Polisher
- Dual mode: random orbit with forced rotation / random orbit
- Elastomer bumper on gear housing for work piece protection
- Brushless motor provides 0-6,800opm with a 5.5mm orbit diameter
- Variable speed control via trigger and pre-set dial
- Constant speed control and soft start for smooth operation
-
MAKITA DPV300Z 18V LXT Brushless Sander & Polisher skin
- Large capacity of 80mm for polishing and 50mm for sanding
- Compact design for comfortable use in narrow work spaces
- XPT technology enhanced protection against dust & moisture
- 2 speed selection Polishing: 0 – 2800 and Sanding: 0 – 9500
- Elastomer bumper on gear housing for work piece protection
-
MAKITA DSD180Z 18V LXT Drywall Saw
- Variable speed control trigger
- Excellent manoeuvrability acheived by the well balance design, allows for easy overhead application
- Base cover protects material from damage
- Dust box is designed to catch dust in overhead application or be connected to dust extraction
- LED joblight
-
MAKITA DSP601ZJ 18Vx2 (36V) LXT Brushless 165mm (6-½”) Plunge Cut Saw skin
- Maximum cutting capacity of 56mm with a -1° to 48° bevel capacity
- Automatic torque drive increases torque to power through any cut
- Smooth cutting performance with up to 6,300rpm no load speed
- Variable speed with soft start and electric brake
- Auto-start Wireless System (AWS) for on demand dust extraction
- note: AWS Chip not included
-
MAKITA DTD171Z 18V LXT Brushless 4-Stage Impact Driver skin
- 4 stage impact selection plus two T-modes, A-mode and bolt mode
- On the go single hand impact selection button
- Impressive 180Nm of max. fastening torque
- XPT technology enhances dust and moisture protection
- Ultra compact design with twin dual side LEDs
-
MAKITA DTM51Z 18V LXT Multi Tool
- Tool-less accessory clamp for quick installation and replacement
- 12 angle setting of accessories at every 30°from 0°to 360°
- Variable speed control by dial
- Battery capacity warning lamp
- Anti-restart function prevents accidental start-up
- Accepts OIS – Makita & Bosch accessories
-
MAKITA DTM52ZX3 18V LXT Brushless Multi Tool StarlockMax
- Tool-less accessory changes with lever locking system
- Compatible with STARLOCK / StarlockMax
- Variable speed dial 10,000 – 20,000 OPM no load speed for versatile performance
- 12 angle settings of accessories at every 30° from 0° to 360°
- 2.5m/s² or less of vibration thanks to AVT (Anti-Vibration Technology)
- Small and easy to grip 169mm diametre barrel grip for comfortable and improved handling
-
MAKITA DTW1002Z 18V LXT Brushless ½” Impact Wrench skin
- Unique rubber joint suppress vibration to battery terminals
- 3 Stage power selection for optimum rpm and fastening torque
- Most powerful in its class with 1,600Nm of nut busting torque
- Twin LED job light with pre glow and after glow function
- Durable hammer case for maximum reliability
Included accessories
Belt hook (346949-3)
-
MAKITA DTW700Z 18V LXT Brushless ½” Impact Wrench
- Compact design for comfortable handling at only 170mm in length
- 4 Stage power selection for optimum rpm and fastening torque
- Maximum nut busting torque of 1,000Nm with 700Nm max. fastening -, Hard: 320Nm, Med: 200Nm, Soft: 150Nm
- Unique rubber joint suppress vibration to battery terminals
- Forward & reverse auto stop function, optimised for fastening applications
-
MAKITA DUB184RT 18V LXT Brushless Blower Kit
Specifications
Max air volume 459 CFM – Max 13.0m³/min Max velocity – Max 187km/h Max blowing force 11N No load speed 0-18,000rpm Overall dimensions 824mm Net weight (skin) 2.4kg Sound Level 96dB(A) Voltage 18V Continuous Run-time Up to 12 minutes with 6.0Ah battery -
MAKITA DUN500WZ 18V LXT Brushless 500mm Articulating Pole Hedge Trimmer skin
- 3-speed Brushless motor delivers 4,400 SPM for faster cutting
- Easy and quick adjustment to 45° tilt-up to 70° tilt-down, with 6 angle settings and can be folded 180° for easy transport and storage
- The triple-edged / Double sided cutting blades allows for optimum smooth cutting performance
- Well balanced design and lightweight at 4.3 kgs* (1 x 6.0Ah)
