Stanley
-
STANLEY STHT55139 5pc Pry Bar Set
Original price was: $NZ37.30.$NZ28.00Current price is: $NZ28.00.- One-piece forged steel construction for strength and durability.
- Hi-visibility powder coat finish resists corrosion.
- Tear-drop nail pullers for easy nail removal.
- Precision ground ends for sharpness.
- Versatile assortment is ideal for basic demolition work.
-
STANLEY® 1-94-745 SORTMASTER® Organiser
Original price was: $NZ54.60.$NZ49.00Current price is: $NZ49.00.- REMOVABLE DIVIDERS: For organising small parts and tools. Round compartment edges make it easier to take out parts.
- SEE THROUGH LID: Provides full visibility of organiser contents.
- LID DESIGN: Interlocks with the dividers to prevents contents spilling and mixing into other compartments.
-
STANLEY® 1-97-517 FATMAX® Pro Shallow Organiser With Metal Latches
- 10 CUPS: Removable and stackable storage cups for organising small parts, components and accessories.
- IP53 WATERSEAL: For resistance to dust and water spray.
- TRANSPARENT LID: Virtually unbreakable lid provides clear visibility of organiser contents.
-
STANLEY® 1-97-518 FATMAX® 10 Cup Deep Professional Organiser with Metal Latches
- 10 CUPS: Removable and stackable storage cups for organising small parts, components and accessories.
- IP53 WATERSEAL: For resistance to dust and water spray.
- TRANSPARENT LID: Virtually unbreakable lid provides clear and un-obstructed visibility of organiser contents.
-
STANLEY® 1991 Utility Blade (Pack Of 5)
$NZ5.70- STANLEY® Original 1991 utility knife blade for every-day, general purpose use.
- EVERY DAY GENERAL USE: The 1991 blade is suitable for cutting most light sheet materials, paper and cardboard.
- SHARP, DURABLE DESIGN: Hardened and tempered for high sharpness and long life.
-
STANLEY® 58-230 Nail Punch 3 Piece Set
Original price was: $NZ22.30.$NZ19.00Current price is: $NZ19.00.- STANLEY® Nail Punches/ Sets are used to finish driving nails or pins flush with, or slightly below, a surface
- Square head prevents rolling when set down
- Fully hardened, precision-milled steel for long life
-
STANLEY® 60 1/2 Low Angle Block Plane (150mm x 35mm)
Original price was: $NZ147.90.$NZ125.00Current price is: $NZ125.00.- Base and sides machined smooth and true
- Comes with pouch
- Fine grey cast iron base
- Low angle cutter for end grain and plastic laminates
- Fully adjustable for depth of cut, cutter alignment and mouth opening
-
STANLEY® 99E Classic Retractable Blade Utility Knife
Original price was: $NZ19.20.$NZ15.00Current price is: $NZ15.00.- STANLEY® 99E Classic Retractable Blade Utility Knife – STANLEY’s original retractable utility knife since 1952.
- DURABLE DESIGN: Precision die cast zinc body both strong and lightweight
- ACCURATE CUTTING: InterLock® nose firmly secures the blade into the knife for safe, accurate cuts
-
STANLEY® DYNAGRIP® Combination Pliers (200mm)
Original price was: $NZ32.70.$NZ29.00Current price is: $NZ29.00.- HEAVY DUTY CONSTRUCTION: Manufactured from drop-forged steel for strength and durability
- CORROSION-RESISTANT: Black oxide finish helps resist corrosion for extended product life
- THREE-ZONE HANDLE: Ergonomically designed Three-Zone Bi-material grips for comfort and control
-
STANLEY® DYNAGRIP® Nail Punch With Handle 3 Piece Set
Original price was: $NZ39.90.$NZ35.00Current price is: $NZ35.00.- STANLEY® DYNAGRIP™ Nail Punches/ Sets are used to finish driving nails or pins flush with, or slightly below, a surface
- Induction heat treated for safety and improved performance
- Long length allows for setting nails in hard to reach places
-
STANLEY® DYNAGRIP® Wood Chisel 3 Piece Set (12,18,25mm)
Original price was: $NZ90.70.$NZ79.00Current price is: $NZ79.00.- STANLEY® DYNAGRIP™ Wood Chisels are Hardened, tempered chrome carbon-steel blades for superior edge retention
- Short series blade for strength and control
- Ergonomic Bi-Material soft grip handle – for maximum grip and control
-
STANLEY® FATMAX® Automatic Wire Stripper
Original price was: $NZ57.90.$NZ49.00Current price is: $NZ49.00.- AUTOMATIC WIRE STRIPPER: For copper or aluminum cables up to 10mm² (multiple cables) and up to 6mm² (single cables)
- ERGONOMIC GRIP AND MORE EFFICIENCY: Possibility of stripping wires with a diameter of 0.2 to 6mm² – The pliers automatically adjust their jaws to the diameter of the wire
- ADJUSTABLE WIRE STOP: Adjustments via fine adjustment screw
-
STANLEY® FATMAX® BladeArmor™ 10M (32mm wide) Tape Measure
Original price was: $NZ69.90.$NZ59.00Current price is: $NZ59.00.- DURABLE BLADE: Abrasion resistant polyester film coated blade coating provides up to 10 times more resistance to abrasion than a standard lacquered blade, increasing the life of the tape and reducing wear on most heavily used sections of the blade.
- BladeArmor™ Coating: reinforces the first 7.5cm of the blade, the section most vulnerable to wear.
- GREATER REACH: 32mm blade width and extended reach of 4.2 metres to help you measure confidently from a distance, even when working alone.
-
STANLEY® FATMAX® BladeArmor™ 8M (32mm wide) Tape Measure
Original price was: $NZ66.40.$NZ55.00Current price is: $NZ55.00.- DURABLE BLADE: Abrasion resistant polyester film coated blade coating provides up to 10 times more resistance to abrasion than a standard lacquered blade, increasing the life of the tape and reducing wear on most heavily used sections of the blade.
- BladeArmor™ Coating: reinforces the first 7.5cm of the blade, the section most vulnerable to wear.
- GREATER REACH: 32mm blade width and extended reach of 4.2 metres to help you measure confidently from a distance, even when working alone.
-
STANLEY® FATMAX® BladeArmor™ Magnetic 8M (32mm wide) Tape Measure
Original price was: $NZ68.50.$NZ59.00Current price is: $NZ59.00.- DURABLE BLADE: Abrasion resistant polyester film coated blade coating provides up to 10 times more resistance to abrasion than a standard lacquered blade, increasing the life of the tape and reducing wear on most heavily used sections of the blade.
- BladeArmor™ Coating: reinforces the first 7.5cm of the blade, the section most vulnerable to wear.
- GREATER REACH: 32mm blade width and extended reach of 4.2 metres to help you measure confidently from a distance, even when working alone.
-
STANLEY® FATMAX® End Cut Compound Action Pliers (190mm/7-1/2in)
Original price was: $NZ56.00.$NZ49.00Current price is: $NZ49.00.- Meet or Exceed ANSI Specs
- COMFORT: Bi-material handle ensures comfort and minimum risk of fatigue
- FINISH: Carbon Steel Forged Construction and heat treated jaws with ground Finish
-
STANLEY® FATMAX® Hammer Tacker
Original price was: $NZ155.90.$NZ139.00Current price is: $NZ139.00.- LONG LIFE: Driver mechanism delivers more than 500,000 cycles for long-life performance
- ANTI-JAM MECHANISM: For continuous use and reliable operation
- CHROME-PLATED STEEL CONSTRUCTION: For corrosion resistance and durability
-
STANLEY® FATMAX® Left Cut Aviation Snips
Original price was: $NZ44.40.$NZ39.00Current price is: $NZ39.00.- STANLEY® FATMAX® Left Cut Aviation Snips with compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- FORGED CHROME MOLYBDENUM STEEL CUTTING BLADES: For strength and durability
-
STANLEY® FATMAX® Left Cut Offset Aviation Snips
$NZ55.70- STANLEY® FATMAX® Left Cut Offset Aviation Snips with compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- OFFSET ANGLED BLADES: Provide clearance between the handles and the cutting material
-
STANLEY® FATMAX® Right Cut Aviation Snips
Original price was: $NZ44.40.$NZ39.00Current price is: $NZ39.00.- RIGHT CUT AVIATION SNIPS: With compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- FORGED CHROME MOLYBDENUM STEEL CUTTING BLADES: For strength and durability
-
STANLEY® FATMAX® Right Cut Offset Aviation Snips (Green)
$NZ55.70- RIGHT CUT OFFSET AVIATION SNIPS: With compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- OFFSET ANGLED BLADES: Provide clearance between the handles and the cutting material
-
STANLEY® FATMAX® Screwdriver Regular Ratchet with 12 Bits
$NZ39.30- FINE 45-TOOTH RATCHET: Delivers extremely high torque with a 9° working arc
- BI-MATERIAL HANDLE: For grip, comfort and high torque loads
- INTERNAL BIT STORAGE: For safe and easy bit storage – keeps bits close to hand
- MAGNETIC HEAD: Enables efficient bit retention and rapid changing of accessories and prevents bit loss
- 3 POSITION RATCHET: Enables clockwise, anti-clockwise and locked ratcheting positions with left, right and central fixed options
- ROBUST FROSTED BAR: Ensures outstanding product life
-
STANLEY® FATMAX® Side Strike Wood Chisel (25mm)
$NZ36.30- STANLEY® FATMAX® Sidestrike Wood Chisel features NEW cutting edge on side of the blade for demolition Work, also allowing the chisel to double as a spokeshave
- Hardened, tempered carbon chrome steel blade for edge retention
- Sharpened side edge for chopping out, cutting, shaving and shaping
- Hardened strike cap and strike surface for durability
- Bi-Material handle for grip and comfort
- Steel core for strength & durability
-
STANLEY® FATMAX® Straight Cut Aviation Snips
Original price was: $NZ44.40.$NZ39.00Current price is: $NZ39.00.- STANLEY® FATMAX® Straight Cut Aviation Snips with compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- FORGED CHROME MOLYBDENUM STEEL CUTTING BLADES: For strength and durability
-
STANLEY® FATMAX® Thru Tang Wood Chisel 6 Piece Set (6,12,18,25,32,38mm)
Original price was: $NZ248.90.$NZ209.00Current price is: $NZ209.00.- STANLEY® FATMAX® Thru-Tang Wood Chisels are 50% stronger than old DynaGrip Pro Chisel on handle side impact test
- Hardened, tempered high-chrome carbon alloy steel blade for edge retention
- Ergonomic Bi-Material soft grip handle – for maximum grip and control
-
STANLEY® FATMAX® TradeLift™
- GET MORE DONE – SOLO: Ideal for jobs where one person isn’t quite enough, with heavy-duty performance delivering up to 150kg lifting force with up to 220mm lifting capacity
- MULTIPLE TRADE APPLICATIONS: Lifts, levels, holds and spreads easily and safely for multiple applications across kitchen, floor, door and window fitting, carpentry, joinery, drywall and general construction work
- FOOT OPERATION FOR EASY HANDS-FREE LIFTING: Safe and easy to use, reducing the risk of injury and accidents when levelling and holding heavy or awkward items such as sheet materials, doors and large appliances
-
STANLEY® FATMAX® Xtreme™ 8M (32mm Wide) Tape Measure
- ABRASION RESISTANT POLYESTER FILM COATED BLADE provides up to 10 times more resistance to abrasion than a standard lacquered blade, increasing the life of the tape and reducing wear on most heavily used sections of the blade.
- BLADEARMOR™ COATING reinforces the first 7.5cm of the blade, the section most vulnerable to wear.
- TRU-ZERO™ HOOK for precise inner and outer measurements, moving back and forth along the securing rivets to account for the hook thickness.
-
STANLEY® Heavy-duty Hammer Tacker
Original price was: $NZ132.30.$NZ119.00Current price is: $NZ119.00.- HEAVY-DUTY: Designed to withstand thick, rugged materials and suitable for applications such as carpeting, insulation, felting and plastic wrapping
- STEEL HOUSING: For added durability and prolonged usability
- FITS 2 STICKS OF STAPLES: To reduce re-load times
-
STANLEY® Heavy-duty Riveter
Original price was: $NZ71.40.$NZ59.00Current price is: $NZ59.00.- BUILT IN NOSE PIECE AND WRENCH STORAGE: 4 interchangeable nose pieces and wrench stored in the handle for easy access and transportation
- STEEL AND ALUMINIUM RIVET COMPATIBLE: For wide range of applications
- LONG HANDLES: Make the riveter easier to squeeze
-
STANLEY® Sharpening System Kit 3 Piece Set (Guide, Oilstone, Oil)
Original price was: $NZ43.00.$NZ39.00Current price is: $NZ39.00.- STANLEY® Sharpening Kit is a must in order to maintain your chisels for superior longevity
- Angle setting gauge with preset markings – 25°, 30° or 35°
- Contains Honing Guide, oilstone and white oil
