Teng
-
Teng 1/2in Dr. 400mm Long Arm Ratchet 60T
Original price was: $NZ103.70.$NZ85.00Current price is: $NZ85.00.• 400mm long handle for added torque when needed
• 45 teeth giving 8 degree increments between clicks
• Twist reverse for quickly and easily changing between tightening and loosening
• Quick release for easier changing between different sockets and accessories
• Bi-material grip for extra comfort
-
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
$NZ112.601200FRP – 1/2in Drive FRP Ratchet
Teng Tools steel reinforced fibre ratchets have been designed to create a 45 teeth (8 degree increment) ratchet with quick release and flip reverse to meet or exceed all internationally recognised quality and torque specifications. The design protected ratchet (24583ROC) is not only lighter and just as strong but is also much more comfortable to use than regular ratchets. New style bi-material handles for a more comfortable grip.
Max Torque: 512Nm Length: 255mm Weight: 358gm
All Teng Tools ratchets should be cleaned and maintained on a regular basis to reduce wear and to prolong life. However, with all tools involving moving parts some wear will occur with time. Teng Tools offer a full range of complete service kits and spare parts for their ratchets – full details available from your local Teng Tools stockist.
-
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb
Torque wrench manufactured to DIN3122 spec. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
-
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
Original price was: $NZ338.30.$NZ255.00Current price is: $NZ255.00.Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
-
Teng 1/4in Dr. FRP Ratchet 45T DIN3122D
$NZ80.901400FRP – 1/4in Drive FRP Ratchet Teng Tools steel reinforced fibre ratchets have been designed to create a 45 teeth (8 degree increment) ratchet with quick release and flip reverse to meet or exceed all internationally recognised quality and torque specifications. The design protected ratchet (24583ROC) is not only lighter and just as strong but is also much more comfortable to use than regular ratchets. Bi-material handles for a more comfortable grip.
Max Torque: 62Nm Length: 150mm Weight: 96gm
All Teng Tools ratchets should be cleaned and maintained on a regular basis to reduce wear and to prolong life. However, with all tools involving moving parts some wear will occur with time. Teng Tools offer a full range of complete service kits and spare parts for their ratchets – full details available from your local Teng Tools stockist.
-
Teng 1/4in Dr. Torque Screwdriver 1-5Nm**
Torque Screwdriver
• For precision tightening of screws and bolts.
• For right hand action.
• With 1/4″ drive and adapter for 1/4″ bits.
• Suitable for e.g. fine mechanics, electronics, etc.
• Tolerance ±6%
• Supplied in plastic box.
Torque Range ISO: 1-5 Nm
Drive for Bits: 1/4 inch
-
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
$NZ140.40Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
Specification:
• Range – 5-25Nm (4-18 ft/lb)
• Scale – 0.4Nm (0.4 ft/lb)
• Overall Length – 277mm
• Weight – 580gm
** After use ALWAYS return torque setting to zero **
-
Teng 1/4in Long Ratchet Flexible Head 43 Teeth 200mm
Original price was: $NZ100.40.$NZ85.00Current price is: $NZ85.00.Features
• 200mm long handle for added torque when needed.
• Flexible ratchet head with locking mechanism for use at different angles.
• 43 teeth giving 8 degree increments between clicks.
• Twist reverse for quickly and easily changing between tightening and loosening.
• Quick release for easier changing between different sockets and accessories.
• Bi-material grip for extra comfort.
-
Teng 1/4in Ratchet Long Arm 43 Teeth 200mm
Original price was: $NZ79.50.$NZ65.00Current price is: $NZ65.00.• 200mm long handle for added torque when needed.
• 43 teeth giving 8 degree increments between clicks.
• Twist reverse for quickly and easily changing between tightening and loosening.
• Quick release for easier changing between different sockets and accessories.
• Bi-material grip for extra comfort.
-
Teng 105pc 1/2in Dr. Metric H/Duty Vehicle Tool Set
THDV105 | Teng 105pc 1/2in Dr. Metric H/Duty Vehicle Tool Set
The 105 hand tools have been selected to handle the most common maintenance tasks that are carried out on heavy machinery or heavy vehicles. Supplied in a hard wearing portable case making it easy to bring all of the tools required directly to job.
The kit consists of an FRP ratchet, extension bar, 17” flex handle, 6-point ½” drive regular sockets from 8-32 mm, ½” drive hex sockets from 5 to 19 mm, several combination spanners from 8 to 32 mm, adjustable wrenches, pliers, side cutters, bits and bits driver, hex key set, flat screwdriver and either a ball pein hammer or an engineers style hammer depending on the set that you choose.
Designed and manufactured to DIN and ISO standards.
-
Teng 10in / 250mm Wide Jaw Adjustable Wrench
Original price was: $NZ108.30.$NZ79.00Current price is: $NZ79.00.Adjustable wrenches with an extra wide jaw opening. Chrome vanadium steel, a 15° jaw angle, ergonomically designed bi-material handle grip and phosphate finish with a graduated scale on the jaws. Exceeding international standards ISO6787-1982, ASME B.107.8-1996, BS6333-1995, DIN3117-1988, JIS B4604-1976.
• Capacity – 50mm / 2in
• Weight – 440gm
-
Teng 10in Quick Set Pliers Wrench
$NZ137.30MB483-10 | Teng 10in Quick Set Pliers Wrench
The TengTools 10-inch quick set pliers wrench MB483-10 is a highly versatile tool tailored for professionals in fields such as automotive repair, plumbing, and general maintenance. This tool effectively eliminates the need for multiple sets of mm and inch spanners, making it a practical asset in any toolkit. Its design prevents surface damage when working with delicate, plated pipe fittings. The tool’s capabilities extend to gripping, holding, pressing, and bending. The parallel jaws are engineered for a firm and consistent grip, providing increased control and efficiency. • Eliminates the need for multiple spanner sets, offering a convenient all-in-one solution
• Ideal for damage-free work on plated fittings, preventing marring or scratching
• Versatile in function, capable of gripping, holding, pressing, and bending
• Parallel jaws design ensures a solid and consistent grip across various applications
Specification
• Capacity: 45mm
• Jaw depth: 35mm
• Tethering facility: No
• Length: 250mm (10in)
• Net weight: 422g
-
Teng 10in/250mm Iq Series Adjustable Wrench
Original price was: $NZ78.60.$NZ65.00Current price is: $NZ65.00.Industrial adjustable wrenches made of chrome vanadium. Exceeding international standards ISOO6787-1982, ASME B.107.8M-1996, BS6333-1995, JISB4604-1976. The 15° jaw allows the wrench to be used in narrow areas as only 30° turning is needed. The wider jaw opening increases the range of bolt sizes that can be fitted. Non protruding on the moveable jaw end gives better access where space is limited. Black phosphate finish with graduated scale and bi-material grip handle.
• Capacity – 33mm / 1-1/4in
• ISO Norm – 320Nm
• Weight – 440gm
-
Teng 11pc Screwdriver Set – Flat | Phillips | Pozi
Original price was: $NZ113.85.$NZ81.90Current price is: $NZ81.90.MD911N | Teng 11pc Screwdriver Set – Flat | Phillips | Pozi • TT-MV PLUS steel blades for added torque. • Bi-material handles for easy use with higher torque and faster speed. • Hole in the handle for hanging or for use as a T-Handle for extra torque or with a fall protection wire if needed. • Designed and manufactured to DIN5264 • Supplied in a handy carrying case.
-
Teng 11pc Screwdriver Set- Flat | Phillips | Pozi | Robinson
Original price was: $NZ103.45.$NZ84.00Current price is: $NZ84.00.MD911N1 | Teng 11pc Screwdriver Set- Flat | Phillips | Pozi | Robinson • TT-MV PLUS steel blades for added torque. • Bi-material handles for easy use with higher torque and faster speed. • Hole in the handle for hanging or for use as a T-Handle for extra torque or with a fall protection wire if needed. • Designed and manufactured to DIN5264 • Supplied in a handy carrying case.
-
Teng 12in / 300mm IQ Series Adjustable Wrench
Original price was: $NZ97.70.$NZ85.00Current price is: $NZ85.00.Industrial adjustable wrenches made of chrome vanadium. Exceeding international standards ISOO6787-1982, ASME B.107.8M-1996, BS6333-1995, JISB4604-1976. The 15° jaw allows the wrench to be used in narrow areas as only 30° turning is needed. The wider jaw opening increases the range of bolt sizes that can be fitted. Non protruding on the moveable jaw end gives better access where space is limited. Black phosphate finish with graduated scale and bi-material grip handle.
• Capacity – 38mm / 1-1/2in
• ISO Norm – 515Nm
• Weight – 660gm
-
Teng 12in/300mm Std Aluminium Frame Hacksaw
Original price was: $NZ47.10.$NZ39.00Current price is: $NZ39.00.Complete With Hss 24T Blade701 – 12IN / 300MM Hacksaw• Professional quality Aluminium hacksaw frame with soft rubber grip.• Includes facility for pre-setting at 45° & 90° cutting angle.• Includes Swedish M2 HSS 25T blade, with storage for extra blades.Overall Length: 390mm -
Teng 15pc 1/2in Dr. Metric Socket Set 10-32mm 12Pnt
Original price was: $NZ140.40.$NZ119.00Current price is: $NZ119.00.1/2” Drive Clip Rail Socket Set
15 piece regular 12-point socket set. Chrome vanadium with stain finish, supplied on metal clip rail.
M1215MM – Metric • 10, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30 & 32mm
-
Teng 16pc 3/8in Dr. mm Socket Set 7-22mm 6Pnt
Original price was: $NZ78.60.$NZ69.00Current price is: $NZ69.00.M3816 – 3/8” Drive Clip Rail Socket Set
• 16 piece regular metric 6-point sockets.
• Chrome vanadium with stain finish.
• Supplied on a clip holder with socket clips.
• Sizes: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 & 22mm
-
Teng 200mm/8in Insulated Long Nose Plier Bent
$NZ78.20MBV463-8 | Teng Insulated Long Nose Plier Bent 200mm
Teng Tools launches additional insulated tools specifically adapted for work on live circuits.
The circuits can be exposed to voltages up to 1000 volts. With standard tools, the technician risks getting bumps that cause serious injury or even death. To avoid this, it is important to use insulated tools when working on live wires and connections.
Teng Tools insulated VDE tools ensure ultimate protection even when used around live circuits with up to a 1000-volt potential. VDE insulated and tested according to the VDE regulations, tools for work in electrically live environments meet the requirements of the internationally acknowledged European IEC60900 standards.
Features
• Approved for live working up to 1,000 volts
• Long 45° offset jaws for easier access
• Jaws with a serrated grip for increased gripping power
• Chrome molybdenum alloy steel for durability and strength
• 80° cutting edge angle • TPR grip for a more secure and comfortable grip
• Design and manufactured to DIN5745 and IEC60900
Cutting Capacity
• Piano Wire: 1.5mm
• Hard Wire: 1.8mm
• Medium Hard Wire: 2.8mm
-
Teng 20pc 1/4in Dr. Socket Set 5.5-13mm
Original price was: $NZ120.10.$NZ99.00Current price is: $NZ99.00.TJ1420 | Teng 20pc 1/4in Dr. Socket Set 5.5-13mm
• 20 piece 1/4″ drive socket set
• Includes the Teng Tools reversible mini bits ratchet
• Includes all the most commonly used sizes from 5.5 to 13mm
• Regular 6 point single hexagon sockets for a better grip
• Teng Tools hip grip design for contact with the flat side of the fastening for reduced damage and use on rounded nuts and bolts • Chrome vanadium satin finish sockets • A selection of screwdriver and TX bits is included to fit a range of fastenings
• Supplied in the unique Teng Tools TJ tray
• Clear fold up lid to see which set you need to use • Sliding catch to secure the set when not in use
• Designed and manufactured to DIN and ISO standards
• Content:
• Accessories 1/4” bits ratchet 50mm magnetic bits holder 1/4”Mx1/4”Hex adaptor
• Regular sockets 6 point 5.5, 6, 7, 8, 9, 10, 13mm
• Bits 25mm Flat 0.6 x 4.5mm, 0.8 x 5.5mm, 1.2×6.5mm, PH1, PH2, PZ1, PZ2, TX10, TX15, TX20
-
Teng 250mm/10in Insulated Water Pump Plier
Features
• Approved for live working up to 1,000 volts
• Simply position the upper jaw against the work piece and press the button to close the jaw-quick, simple and time saving
• Pipe grip with serrated jaws for increased grip
• Shaped to protect the operators’ fingers
• TPR grip for a more secure and comfortable grip
• Design and manufactured to IEC60900
• Max Capacity: 50mm
-
Teng 29pc Bits Set (Flat-PH-PZ-TX-TPX-HEX-ROB)
Original price was: $NZ124.80.$NZ99.00Current price is: $NZ99.00.TJ1429 | Teng 29pc Bits Set (Flat-PH-PZ-TX-TPX-HEX-ROB)
• 29 piece 1/4″ hex bit set
• Includes all the most commonly used screwdriver, hex and TX 25mm bits to suit different applications
• Includes the Teng Tools reversible mini bits ratchet
• Supplied in the unique Teng Tools TJ tray
• Clear fold up lid to see which set you need to use
• Sliding catch to secure the set when not in use
• Content: • Accessories 1/4” Bits Ratchet 50mm Magnetic Bits Holder
-
Teng 3/4in Dr. Torque Wrench 65-450Nm / 48-330ft/lb
Original price was: $NZ504.70.$NZ379.00Current price is: $NZ379.00.Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
Specification:
• Range – 65-450Nm (48-330 ft/lb)
• Scale – 5.0Nm (5.0 ft/lb)
• Overall Length – 850mm
• Weight – 3.84kg
** After use ALWAYS return torque setting to zero **
-
Teng 3/8in Dr. FRP Ratchet 45T
Original price was: $NZ93.40.$NZ79.00Current price is: $NZ79.00.Teng Tools steel reinforced fibre ratchets have been designed to create a 45 teeth (8 degree increment) ratchet with quick release and flip reverse to meet or exceed all internationally recognised quality and torque specifications. The design protected ratchet (24583ROC) is not only lighter and just as strong but is also much more comfortable to use than regular ratchets. New style bi-material handles for a more comfortable grip.
-
Teng 3/8in Dr. Torque Wrench 20-110Nm / 15-75ft/lb
Accuracy ±4% For General Use, With Angular Gauge
3/8″ drive torque wrench which can be used for both tightening and final checking of the torque. The torque wrench is reversible with a lever but only for right hand action for torque checking. It’s equipped with an angular gauge for after tightening. Graduated in Nm and ft/lbs. It features a lockable setting and has an accuracy of +/- 4%. DIN3122 with a satin finish. Supplied with factory calibration certificate.
-
Teng 3/8in Long Ratchet Flexible Head 41 Teeth 300mm
Original price was: $NZ111.20.$NZ99.00Current price is: $NZ99.00.Features
• 300mm long handle for added torque when needed.
• Flexible ratchet head with locking mechanism for use at different angles.
• 41 teeth giving 8 degree increments between clicks.
• Twist reverse for quickly and easily changing between tightening and loosening.
• Quick release for easier changing between different sockets and accessories.
• Bi-material grip for extra comfort.
-
Teng 3/8in Ratchet Long Arm 41 Teeth 300mm
Original price was: $NZ100.40.$NZ85.00Current price is: $NZ85.00.• 300mm long handle for added torque when needed.
• 41 teeth giving 9 degree increments between clicks.
• Twist reverse for quickly and easily changing between tightening and loosening.
• Quick release for easier changing between different sockets and accessories.
• Bi-material grip for extra comfort.
-
Teng 36pc 1/4in Dr. Metric Reg/Deep Socket Set
Original price was: $NZ120.40.$NZ99.00Current price is: $NZ99.00.Set Contents:
• Regular sockets (6-point) – 4, 5, 5.5, 6, 7, 8, 10, 11, 12, 13mm
• Deep sockets (6-point) – 6, 7, 8, 10, 12, 13mm
• 1/4in drive 45T Ratchet (1400FRP)
• Universal joint
• 2in / 75mm & 4in / 100mm extensions
• Coupler adaptor
• 3/8F:1/4M T-bar adaptor
• Bits 1/4in hex – TX10, TX15, TX20, PH1, PH2, PZ1, PZ2, 5mm hex, 6mm hex, 4mm flat, 5.5mm flat
• Hex keys – 1.5, 2.0, 2.5mm
• Size – 240 x 125 x 38mm
• Weight – 900gm
-
Teng 39pc 3/8in Dr. Metric Reg/Deep Socket Set
$NZ155.20T3839 – 39pc 3/8in Drive Metric Socket Set 39 piece 3/8in drive socket set containing regular (8-22mm) and deep (8-19mm) 6-point sockets, coupler adaptor, 1/2F:3/8M adapator, 3in & 6in extensions, universal joint, 2 spark plug sockets (16 & 21mm), FRP ratchet as well as 11 driver bits. Supplied in a plastic carrying case with latch lid, retractable handle and metal pin hinges. The underside of the case is fitted with rubber feet to prevent it from sliding.
-
Teng 44pc 1/2in Dr. Metric & AF Socket Set
Original price was: $NZ403.30.$NZ349.00Current price is: $NZ349.00.T1244 | Teng 44pc 1/2in Dr. Metric & AF Socket Set 44 piece 1/2″ Drive Socket Set containing 12 point regular metric & imperial sockets, deep metric sockets, FRP ratchet, flex handle, extension bars, universal joint, T bar adaptor and spark plug sockets, screwdrivers and a double ring spanner. The set comes supplied in a plastic carrying case with a latch lid, a retractable handle specifically designed for comfort and durability, hard wearing hinges with metal pins for extended life and rubber feet to prevent the set from sliding and also to protect it from scratching. The set also has a clear and simple layout which makes it easy to see what tools are missing when the job is done.
-
Teng 48pc 3/8in Dr. Metric/AF Socket & Tool Set
Original price was: $NZ579.60.$NZ399.00Current price is: $NZ399.00.T3848 – 48 Piece 3/8in Drive MM/SAE Socket & Tool Set Need a set of tools that’s easy to store away! Then this is the set for you… great for the car, boat, Bach, workshop or around the home, contains all the basics plus some! 48 piece tool set containing 6 point regular metric and SAE sockets (10 x MM & 4 x SAE), 2 spark plug sockets, 14 combination spanners (10 x MM & 4 x SAE), 6 screwdrivers, 5 pliers, adjustable wrench, fibre reinforced ratchet, 75 mm and 150 mm extension bars, coupler adaptor and 1/2in F-3/8in M adaptor. Supplied in plastic case with latch lock in metal, retractable handle and metal pin hinges. The underside of the case is fitted with rubber feet to prevent it from sliding.
-
Teng 4pc Circlip Plier Set – External/Internal
$NZ42.30With Interchangeable Heads.480 4 Piece Circlip Plier Set• For internal and external circlips 10-50mm.• Four interchangeable heads giving eight different combinations.• The tips are magnetic.• Return spring.• Plastic covered handles. Contents: Tips (magnetic) – internal/external 90 degree tips Tips (magnetic) – internal/external 45 degree tips Tips (magnetic) – internal/external straight 1.5mm tips Tips (magnetic) – internal/external straight 1.2mm tips Handle – Reversible, spring loaded handles with locking pin -
Teng 6526MM 26pc Combination Metric Spanner Set w/Wallet 6-32mm
$NZ399.00Features
• Off set at 15° for easier use on flat surfaces
• TengTools hip grip design for contact with the flat side of the fastening
• Chrome vanadium satin finish
• Supplied in a handy tool roll style wallet
• Designed and manufactured to DIN3113A
• Sizes: 6, 7, 8, 9, 10, 11, 12,13, 14,15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 32mm
-
Teng 6in/150mm Iq Series Adjustable Wrench
Original price was: $NZ55.80.$NZ49.00Current price is: $NZ49.00.Industrial adjustable wrenches made of chrome vanadium. Exceeding international standards ISOO6787-1982, ASME B.107.8M-1996, BS6333-1995, JISB4604-1976. The 15° jaw allows the wrench to be used in narrow areas as only 30° turning is needed. The wider jaw opening increases the range of bolt sizes that can be fitted. Non protruding on the moveable jaw end gives better access where space is limited. Black phosphate finish with graduated scale and bi-material grip handle.
• Capacity – 24mm / 15/16in
• ISO Norm – 85Nm
• Weight – 140gm
-
Teng 7in Quick Set Pliers Wrench
$NZ109.90MB483-7 | Teng 7in Quick Set Pliers Wrench
The TengTools 7-inch quick set pliers wrench MB483-7 is a convenient addition to the professional’s toolkit, merging the functionality of multiple tools into one. This versatile plier wrench is engineered to replace both mm and inch spanners, providing practical functions like gripping, holding, pressing, and bending. The tool is especially advantageous for mechanical and automotive repairs, and for handling delicate or plated fittings in plumbing and electrical installations without surface damage. The parallel jaws ensure a more solid and consistent grip for a variety of tasks.
• Eliminates the need for multiple spanner sets, offering a convenient all-in-one solution
• Ideal for damage-free work on plated fittings, preventing marring or scratching
• Versatile in function, capable of gripping, holding, pressing, and bending
• Parallel jaws design ensures a solid and consistent grip across various applications Specification
• Capacity: 37mm
• Jaw depth: 25mm
• Tethering facility: No
• Length: 180mm (7in)
• Net weight: 223g
