Dust Extraction
-
FESTOOL CT-VA Cyclone Pre Separator
$NZ802.70Efficient, simple and reliable
The Festool CT Pre Separator with cyclone technology separates and collects coarse and fine dust before it reaches the mobile dust extractor. The dust heavy air that is drawn in is swirled into a spiral movement in the cyclone, causing the dust particles to hit against the wall of the cyclone and, due to the gravitational force, to fall into the collection container of the CT pre separator.
For craftsmen who work with large volumes of dust and debris, the CT Cyclone pre separator is the simplest answer for increasing the efficiency of your CT Dust Extractor and minimizing its lifetime cost of ownership all within a compact solution that fits seamlessly into the Festool Systainer modular storage system, allowing for easy storage and transportation.
Remove larger dust and debris before it fills your filter bag by using the CT Cyclone and reduce how often you need to replace filter bags and filters. Maintains a consistently high suction power as a result of reducing the dust load on the main filter.
-
FESTOOL Main Filter HEPA for CT 26/36/48
HEPA Main Filter for use with CT 26, 36 and 48 Dust Extractor. The highest standard for filtration, HEPA filters capture 99.99% of all particulate matter down to .3 microns. HEPA filters (High Efficiency Particulate Air) have quickly become the new standard for wood dust collection, both in the workshop and on the jobsite. Measured in microns, wood dust is particularly troublesome to remove from an environment once it is airborne. Eliminate the majority of the dust created at the source before it is ever released into your environment. Designed to trap particles down to .3 microns while maintaining airflow, allowing you to reach full capacity without clogging or caking.
-
FESTOOL Replacement Selfclean Filter Bags for CT 36 – 5 Pack
$NZ127.70Self cleaning filter bag for use with CTL 36, allows for optimum usage of filter bag volume and constant suction power. Caking of dust reduces effective suction power dramatically resulting in poor extraction efficiency and performance. The self cleaning Festool filter bag prevents caking with its unique pliable fleece material. This means that your Festool dust extractor continues to deliver full suction until the bag is completely full. The filter bag traps dust particles down to 5 microns, reducing wear and tear as well as the expense of frequent filter replacement. The tear resistant material and integrated closure on the bag shuts the opening to prevent spilling.
-
FESTOOL Replacement Selfclean Filter Bags for CT MIDI – 5 Pack
$NZ78.20Self cleaning filter bag for use with CTL MIDI (suits superseded CT MINI & MIDI models – not suitable for new CT MIDI-2 575839), allows for optimum usage of filter bag volume and constant suction power. Caking of dust reduces effective suction power dramatically resulting in poor extraction efficiency and performance. The self cleaning Festool filter bag prevents caking with its unique pliable fleece material. This means that your Festool dust extractor continues to deliver full suction until the bag is completely full. The filter bag traps dust particles down to 5 microns, reducing wear and tear as well as the expense of frequent filter replacement. The tear resistant material and integrated closure on the bag shuts the opening to prevent spilling.
-
FESTOOL Selfclean Filter Bag for CT SYS – 5 Pack
$NZ46.00Dust doesn’t stand a chanceSelf cleaning filter bag for use with CTL SYS, allows for optimum usage of filter bag volume and constant suction power. Caking of dust reduces effective suction power dramatically resulting in poor extraction efficiency and performance.
The self cleaning Festool filter bag prevents caking with its unique pliable fleece material. This means that your Festool dust extractor continues to deliver full suction until the bag is completely full.
The filter bag traps dust particles down to 5 microns, reducing wear and tear as well as the expense of frequent filter replacement. The tear resistant material and integrated closure on the bag shuts the opening to prevent spilling.
-
FESTOOL SELFCLEAN FILTER BAGS SC-FIS-CT15/MIDI-2 5PK
$NZ61.00Self cleaning filter bag for use with CTL MIDI 2 dust extractor (not suitable to previous models of CT MIDI), allows for optimum usage of filter bag volume and constant suction power. Caking of dust reduces effective suction power dramatically resulting in poor extraction efficiency and performance.
The self cleaning Festool filter bag prevents caking with its unique pliable fleece material. This means that your Festool dust extractor continues to deliver full suction until the bag is completely full.
The filter bag traps dust particles down to 5 microns, reducing wear and tear as well as the expense of frequent filter replacement. The tear resistant material and integrated closure on the bag shuts the opening to prevent spilling.
-
FESTOOL VACUUM REMOTE CONTROL CT-F I/M SET
$NZ235.80CT-F I/M-Set. for CT 26, 36, 48 (except EC and EC B22), retrofit set for CT 26, 36, 48, module to be installed in the spare module slot, remote operation via remote control (included in set) or via cordless tool (in combination with Bluetooth® battery pack), allows the mobile dust extractor to start automatically when the cordless tool is switched on (requires compatible Bluetooth® battery pack), receiver module (for CT 26, 36, 48)
-
FILTA WET & DRY 30LT SMS MULTI LAYERED VACUUM CLEANER BAGS 5 PACK (C020) 20072
$NZ34.90Compatible with:
Karcher, Makita, Lavor, Mezzo, Morgan, Pacvac, Ozito, Pullman, Power Force, Ryobi, Stihl, Supervac, Thomas, Truvox,Vetrella, Wertheim, Wetrok, Wirbel, Black & Decker, Bosch, Delonghi, Ghibli, Hako, Nilfisk Duravac, Duravac, Shopvac, Hoover, Milwaukee, Protool, Rupes, Stihl, Super-Works, Wallpro, WAP, Work hero
Optimum air filtration captures fine dust particles including drywall and concrete dust.Traps 99.5% of dust particles for more efficient and healthy cleaning.
-
FILTA WET & DRY 50LT SMS MULTI LAYERED VACUUM CLEANER BAGS 5 PACK (C025) 20095
$NZ44.30Filta Construction Vac bags:
SMS multi layered vacuum dust bags, for wet and dry vacuums and work shop vacuums. Filta dust bags are made tough, providing high performance dust extraction and dust retention.
Compatible with,
Karcher, Makita, Lavor, Mezzo, Morgan, Pacvac, Ozito, Pullman, Power Force, Ryobi, Stihl, Supervac, Thomas, Truvox,Vetrella, Wertheim, Wetrok, Wirbel, Black & Decker, Bosch, Delonghi, Ghibli, Hako, Nilfisk Duravac, Duravac, Shopvac, Hoover, Milwaukee, Protool, Rupes, Stihl, Super-Works, Wallpro, WAP, Work hero
Optimum air filtration captures fine dust particles including drywall and concrete dust.Traps 99.5% of dust particles for more efficient and healthy cleaning.
-
HOLER Composite EDGE Angle Grinder Dust Shroud | EU edt. | 175mm
$NZ299.00- Made of cast composite, our custom made dust shroud has been carefully developed with no compromises in design or materials used
- The built-in rubber diaphragm ensures self-levelling of the dust shroud regardless of the segment height
- Adjustable built-in air vent to reduce vacuum pressure if suction of vacuum cleaner is too strong
- Replaceable Nylon wear strips have been fitted to prolong the lifetime of shroud
- The unique flip top front allows edge grinding right up to the edge 99% dust free. No tools are required to open or close the mouth piece.
- US/Canada edition also available with special imperial threaded nuts, please enquire
175 mm
- Vacuum nozzle: ID35 mm / +OD35 mm OD50 mm
- Fits Makita, Hitachi, Bosch M14 and DeWalt
-
Holer Dust shroud | Grinder 175mm | Steel | Basic
$NZ236.90Protect your lungs and the people around you! This custom designed shroud is suitable to attach to most dry vacuum units for dust extraction when grinding concrete, sanding wood and plaster board or any other dust. The simple collar and screw adjustment means it can be fitted to most angle grinders or sanders. The featured Velcro backed skirt can be adjusted to accommodate various backing pad or diamond cup grinder heights. Designed and Made in New Zealand. CE approved, complies 2006/42/EC.
GRINDER NOT INCLUDED
-
HOLER STEEL 125mm ANG. GRINDER DUST SHROUD
$NZ169.00- This custom designed shroud is suitable to attach to most dry vacuum units for dust extraction when grinding concrete, sanding wood and plaster board or any other material creating dust
- The simple collar and screw adjustment means it can be fitted to most angle grinders or sanders
- The featured Velcro backed skirt can be adjusted to accommodate various backing pad or diamond cup grinder heights
- Designed and Made in New Zealand. CE approved, complies 2006/42/EC.
125 mm
- Collar size: 42 mm
- Vacuum nozzle: ID35 mm / OD38 mm
- Fits most angle grinders and sanders
-
MAKITA 100mm Dust collecting wheel guard
Original price was: $NZ129.80.$NZ110.00Current price is: $NZ110.00.- For 100mm models
- Adjustable depth stops for added convenience
- Plunge feature allows for maximum material removal
- Adjustable line of cut indicator
- 38 mm Ø Dust port can be adjusted 360° for added versatility
- Clear viewing window for improved visibility
Specifications:
- Max depth Cut: 23mm
- Dust Port: 38mm Ø *Size: 100mm
Includes:
1 x Allen Key 1 x Vacuum Hose Clip 1 x Allen Key Holder
-
MAKITA 125mm (5″) Dust collecting wheel guard
Original price was: $NZ141.00.$NZ119.00Current price is: $NZ119.00.- Replacement angle grinder guard allowing connection to suitable dust extraction unit for reduced airborne dust particles
- Compatible with most Makita 115mm (4½”) and 125mm (5″) cordless and mains angle grinders
- Not Compatible with XGT 125mm (5″) Grinders and GA5050
-
MAKITA 125mm (5″) Dust collecting wheel guard
$NZ177.70The Makita 125mm Dust Extracting Tuck Point Guard is designed to work with Makita 5″ 125mm Angle Grinders for tuck pointing applications. The cover features adjustable depth stops for more efficient work. The viewing window and guide make it easier for the user to make precision cuts
-
MAKITA 125mm (5″) XGT Plunge Diamond wheel guard
Original price was: $NZ177.70.$NZ159.00Current price is: $NZ159.00.The 125mm Tool-Less Dust Extraction Cutting/Tuck Point Guard is designed to work with Makita® 115mm / 125mm Angle Grinders with quick guard rotation. This guard is for use in tuck pointing applications, allowing maximum material removal and up to 25.4mm cutting depth when used with a 125mm blade. The cover features adjustable depth stops for more efficient work. The clear viewing window and guide make it easier for the user to make precision cuts. It features a tool-less design for easy installation and adjustments ( not suitable for use with X-LOCK)
-
MAKITA 180mm (7″) Dust collecting wheel guard
Original price was: $NZ208.10.$NZ189.00Current price is: $NZ189.00.- Easy-to-see adjustable guide for greater accuracy
- Dust port can be adjusted 360 degrees for added versatility
- Cover pivots open for easy wheel changes
- Attachment point on both sides for optional handle
- Durable, high quality metal construction for long life and added durability
- Base plate features a rounded lead edge for easier movement while making cuts
- Installs quickly and easily for added user convenience
- For use with Makita (7″) 180mm to (9″) 230mm Grinders
-
MAKITA 5PK VACUUM BAGS- SUIT VC4210
$NZ85.10The Makita® Fleece Filter Bag is designed for use with the Makita® Wet/Dry HEPA Filter Dust Extractor/Vacuum (VC4210, sold separately) to capture dust and debris. The bag features a fleece design for added durability. Like a first-stage pre-filter, the fleece filter bag captures larger particles and extends the life of the main flat filter. It installs quickly and easily for added user convenience.
-
MAKITA AWS Adaptor Set (199766-8)
- Auto-start Wireless System(AWS) for on demand dust extraction
- Connects via AC power input socket on 240V dust extraction systems
- Eliminates the need to manually start dust extractor for each operation
- Adjustable metal hook and strap for convenient on-board storage
- Includes Bluetooth AWS chip
- Dimensions (L x W x H) 154mm x 71mm x 57mm
- Weight: 0.41kg
-
MAKITA Cyclone attachment Set
Makita has come out with a new cyclone vacuum attachment (199491-1) that works with their cordless hand vacs, but it could also potentially be used with other vacuums
They say that it captures up to 90% of dust particles, which helps to “reduce the need to empty vacuum main canister/filter by up to 84%.”
It can be rotated or repositioned, in case you need to use the vacuum in tight spaces
- Separates 90% of dust to maintain suction power
- Dust collection capacity: 400 ml
- Weight: 0.35 kg
- One-piece mounting and removal of the dust cover
Ideal for Makita cordless vacuum’s DVC261, DVC260, DCL180, DCL181, DCL182, CL106FD, CL108F
-
MAKITA DX06 – Dust Extractor Attachment with HEPA Filter
- Impact filter cleaning mechanism – Turn the dial to impact the filter case releasing the dust from the filter
- HEPA filtration system – Captures 99.97% of concrete dust particulates 0.3 microns and larger
- 2 Stage Dust Extraction Nozzle – Stage 1 drill bits 110 mm to 165 mm / Stage 2 drill bits 210 mm to 265 mm
- Adjustable depth stop – with 5 mm increments
- DX Extractors – Powered by a separate motor allowing the rotary hammer to maintain peak drilling performance
Dust filter cleaning dial:
- Removes excess dust from filter
- Maintains vacuum efficiency and performance
-
METABO 630235000 VACUUM Start/Stop set
$NZ265.00- When starting upshutting down the cordless tool, the connected mains-powered vacuum cleaner starts/stops automatically
- Compatible with standard cordless, mains-powered tools and vacuum cleaners available on the market
- Manual starting of the vacuum cleaner is also possible with the remote button at the coupling bush of the hose
- “Vibration detection” function at the transmitter permits automatic start-up/shut-down of the vacuum cleaner by detecting vibrations
- If the vibrations are too low, the transmitter can be connected directly to to the extracting tool using the multi tape
- Multi tape to fix the transmitter to all standard hose diameters
- Start/stop cordless control replaces the function of the integrated power socket for a mains-powered tool
-
MILWAUKEE PACKOUT™ Cyclone Debris Separator
$NZ205.00Specifications
Platform PACKOUT™Capacity 9.5LDimensions 412 x 249 x 328mmWeight 3.3 kgWarranty 3 YearsCompatibility Vacuum Compatibility: Wet & Dry Vacuums | Vacuum Mounting Clips Compatibility: M18FVC23L, M18FVC34L, M18FVC45LSeparation Efficiency Up to 99% of Saw DustExpandable Hose Diameter 47.6mm (1-7/8″)Multi-Fit Hose Adaptor Diameter 31.8mm (1-1/4”), 47.6mm (1-7/8”), 63.5mm (2-1/2”)
