ACCESSORIES
-
GFB Magnetic Insert Bit Holder
Original price was: $NZ16.50.$NZ15.00Current price is: $NZ15.00.GFB Bit holders are manufactured to the highest specifications as required by top-line industries such as Aviation.
Specifications
- Type: Magnetic Bit Holder 1/4 inch hex shank
- Length: 75mm
- Fitting for 1/4 inch hex bits
- 1 Piece pack on card
-
HIKOKI 1600mm Guide Rail (Suits C3606DPA)
$NZ253.00For straight and secure guidance Splinter protection reduces breakout when sawing Adhesive coating for safe, non-slip surface contact as well as protection of the workpiece surface With holes to fix the rail to the workpiece and for hanging storage Can be extended in length with the second guide rail and FSV connector (accessory). Part Number FS160INBAG supplied by sister brand Metabo Power Tools.
-
HOLER Composite EDGE Angle Grinder Dust Shroud | EU edt. | 175mm
$NZ299.00- Made of cast composite, our custom made dust shroud has been carefully developed with no compromises in design or materials used
- The built-in rubber diaphragm ensures self-levelling of the dust shroud regardless of the segment height
- Adjustable built-in air vent to reduce vacuum pressure if suction of vacuum cleaner is too strong
- Replaceable Nylon wear strips have been fitted to prolong the lifetime of shroud
- The unique flip top front allows edge grinding right up to the edge 99% dust free. No tools are required to open or close the mouth piece.
- US/Canada edition also available with special imperial threaded nuts, please enquire
175 mm
- Vacuum nozzle: ID35 mm / +OD35 mm OD50 mm
- Fits Makita, Hitachi, Bosch M14 and DeWalt
-
HOLER DIAMOND Cup Wheel | HAMMERHEAD*** | 175mm | ORANGE | PCD
Original price was: $NZ489.50.$NZ369.00Current price is: $NZ369.00.PR Raptor: Large segment PCD diamond cup grinder for effective grinding of thick and sticky paint, glue, Vinyl, Cork, Bitumen Sealer & glue. This cup will gauge and groove the surface and is best suited for heavy duty removal or floor prep!
Thick Coatings | Vinyl & Cork | Tile Screed Suitable Angle grinders Quality Premium*** Application Wet & Dry Standard Bore 22.2 -
Holer Dust shroud | Grinder 175mm | Steel | Basic
$NZ236.90Protect your lungs and the people around you! This custom designed shroud is suitable to attach to most dry vacuum units for dust extraction when grinding concrete, sanding wood and plaster board or any other dust. The simple collar and screw adjustment means it can be fitted to most angle grinders or sanders. The featured Velcro backed skirt can be adjusted to accommodate various backing pad or diamond cup grinder heights. Designed and Made in New Zealand. CE approved, complies 2006/42/EC.
GRINDER NOT INCLUDED
-
HOLER FLUSH CUT DIAMOND BLADE 125MM M14
Original price was: $NZ119.80.$NZ99.00Current price is: $NZ99.00.Whisper Cut DCU(S)** designed for cutting Concrete & Universal material as well as Granite & Hard Stone. Features the Whisper steel core with air holes for reduced noise and extra cooling.
Enables flush cutting into masonry materials.
-
HOLER STEEL 125mm ANG. GRINDER DUST SHROUD
$NZ159.00- This custom designed shroud is suitable to attach to most dry vacuum units for dust extraction when grinding concrete, sanding wood and plaster board or any other material creating dust
- The simple collar and screw adjustment means it can be fitted to most angle grinders or sanders
- The featured Velcro backed skirt can be adjusted to accommodate various backing pad or diamond cup grinder heights
- Designed and Made in New Zealand. CE approved, complies 2006/42/EC.
125 mm
- Collar size: 42 mm
- Vacuum nozzle: ID35 mm / OD38 mm
- Fits most angle grinders and sanders
-
KANZAWA L-Shaped Angle Drill
Original price was: $NZ212.40.$NZ199.00Current price is: $NZ199.00.Features:
- L-Shaped 90-degree angle drill attachment.
- Ideal for drilling holes in tight spaces and corners.
- Used in carpentry, electrical, plumbing, and car repair work.
- 10mm chuck.
- Handle attachment on three sides for enhanced maneuverability.
- Reversible design allows easy drilling in all directions.
- Made in Japan.
Specifications:
- Length: 117mm
- Width: 89mm
- Depth: 36mm
- Handle Length: 69mm
- Angle: 90-degree
- Chuck: 10mm
- Shank: 8mm
- Weight: 446g
-
KANZAWA L-Shaped Angle Screw Driver
Original price was: $NZ176.30.$NZ159.00Current price is: $NZ159.00.Features:
- A 90-degree attachment for 18v power impact drivers.
- Ideal for screwing in narrow and hard-to-reach areas.
- Capable of driving coarse threads up to 75mm effortlessly.
- Compact design with a head depth of 50mm for tight spaces.
- Handle attachment on three sides enhances maneuverability.
- Comes with 2 PH2 x 25mm bits, one encased in the handle.
- Easy Quick-Change 6.35mm hex shank.
- Made in Japan.
Specifications:
- Length: 125mm
- Width: 26mm
- Depth: 50mm
- Handle Length: 69mm
- Angle: 90-degree
- Shank: 6.35mm
- Weight: 253g
-
LENOX 26PC BI-METAL HOLESAW KIT
Original price was: $NZ526.40.$NZ399.00Current price is: $NZ399.00.IMPROVED METAL CUTTING PERFORMANCE
Increased wall thickness improves durability and minimizes tooth loss
Optimized tooth design penetrates metal with easeFAST, EFFICIENT CUTTING IN WOOD
Larger, sharper teeth remove more wood for fast cuttingEASY PLUG REMOVAL
Speed Slot staircase design for fast, easy plug ejection*vs. Prior LENOX Generation
-
Linishall Model 036P Belt and Disc Sander Attachment
$NZ289.00Supplied with full installation instructions.
- Fits easily to most 200mm (8”) and 250mm (10″) bench grinders that have screw-on wheel guards
- Belt size: 915 mm x 50 mm (36”x2”)
- Disc size: 178 mm (7”)
- Rugged cast metal construction
- Simple assembly & adjustment
- Longer rubber contact wheel life
- Easy belt tracking with no tools required
-
MAKITA 1.0M Guide Rail (199140-0)
Original price was: $NZ141.80.$NZ119.00Current price is: $NZ119.00.The Makita 1.0M Plunge Saw Guide Rail (199140-0), when used with a Makita Plunge / Circular Saw is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge / Circular Saw (not included) to provide smooth, dead-on straight cuts
- 1.0M guide rail for use with Makita Plunge / Circular Saw models
- Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
- Ideal for ripping sheet material
- Alternate use with select routers and circular saws, must use with router guide rail adaptor (194579-2) and saw guide rail adaptor (196953-0)
-
MAKITA 1.4-1.5m Guide Rail holder (E-05664)
Original price was: $NZ133.40.$NZ109.00Current price is: $NZ109.00.- Universal size to hold both sizes of guide rails: 1,4m and 1,5m
- Protects your guide rails from scratches and shakes during transport or storage
- Strap Belt System belt included
- Designed to be durable but lightweight
- Designed to hold various sizes of guide rails safely
- Constructed of heavy-duty 1680D polyester with foam lining for extreme durability
-
MAKITA 100mm Crimped Wire Bevel Brush, M10 x 1.5 (D-77556)
$NZ16.20Makita Crimped Wire Bevel Brushes are designed to work with angle grinders for a variety of material removal applications. It is ideal for grooves, curves and corners, and for efficient action on irregular objects
- Ideal for grooves, curves, and corners
- Efficient action on irregular objects
- Ideal for side cleaning action
- rust-resistant stainless steel wire diameter 0.3mm
- Max RPM 12,500
- For use with angle grinders
-
MAKITA 100mm Dust collecting wheel guard
Original price was: $NZ129.80.$NZ110.00Current price is: $NZ110.00.- For 100mm models
- Adjustable depth stops for added convenience
- Plunge feature allows for maximum material removal
- Adjustable line of cut indicator
- 38 mm Ø Dust port can be adjusted 360° for added versatility
- Clear viewing window for improved visibility
Specifications:
- Max depth Cut: 23mm
- Dust Port: 38mm Ø *Size: 100mm
Includes:
1 x Allen Key 1 x Vacuum Hose Clip 1 x Allen Key Holder
-
MAKITA 1140mm 10T Band saw blade
Original price was: $NZ50.20.$NZ45.00Current price is: $NZ45.00.Makita® Band Saw Blades featuring bi-metal construction last longer than carbon blades for added user convenience and value. These blades are designed to cut a wide variety of materials including non-ferrous metal, mild steel, cast steel, and stainless steel. They have a wavy tooth set to make clean cuts in sheets, tubes, and pipes. These blades are for use with the Makita 18V /40V Portable Band Saw model DPB180 PB002G sold separately)
- Designed to cut Plastics, Non-ferrous metal, Mild steel, Cast steel and cast iron, Hard steel and stainless steel
- For use with the Makita 18V /40V Portable Band Saw model DPB180 PB002G
- 1140mm x 13mm x 0.5mm
-
MAKITA 115 x 1.0 x 22.23mm INOX Metal / Stainless Cut Off Disc – 25 Pack
Original price was: $NZ64.30.$NZ50.00Current price is: $NZ50.00.- 1.0mm Thin cutting for improved efficiency
- A60U-BF Grit (U denotes hardness for longer life)
- Suitable for Stainless Steel Cutting for constructors / metal workshop workers / plumbers
- For use with 115mm (5″) Angle Grinders
-
MAKITA 125mm (5″) Dust collecting wheel guard
Original price was: $NZ141.00.$NZ119.00Current price is: $NZ119.00.- Replacement angle grinder guard allowing connection to suitable dust extraction unit for reduced airborne dust particles
- Compatible with most Makita 115mm (4½”) and 125mm (5″) cordless and mains angle grinders
- Not Compatible with XGT 125mm (5″) Grinders and GA5050
-
MAKITA 125mm (5″) Dust collecting wheel guard
$NZ177.70The Makita 125mm Dust Extracting Tuck Point Guard is designed to work with Makita 5″ 125mm Angle Grinders for tuck pointing applications. The cover features adjustable depth stops for more efficient work. The viewing window and guide make it easier for the user to make precision cuts
-
MAKITA 125mm (5″) XGT Plunge Diamond wheel guard
Original price was: $NZ177.70.$NZ159.00Current price is: $NZ159.00.The 125mm Tool-Less Dust Extraction Cutting/Tuck Point Guard is designed to work with Makita® 115mm / 125mm Angle Grinders with quick guard rotation. This guard is for use in tuck pointing applications, allowing maximum material removal and up to 25.4mm cutting depth when used with a 125mm blade. The cover features adjustable depth stops for more efficient work. The clear viewing window and guide make it easier for the user to make precision cuts. It features a tool-less design for easy installation and adjustments ( not suitable for use with X-LOCK)
-
MAKITA 180mm (7″) Dust collecting wheel guard
Original price was: $NZ208.10.$NZ189.00Current price is: $NZ189.00.- Easy-to-see adjustable guide for greater accuracy
- Dust port can be adjusted 360 degrees for added versatility
- Cover pivots open for easy wheel changes
- Attachment point on both sides for optional handle
- Durable, high quality metal construction for long life and added durability
- Base plate features a rounded lead edge for easier movement while making cuts
- Installs quickly and easily for added user convenience
- For use with Makita (7″) 180mm to (9″) 230mm Grinders
-
MAKITA 3.0M guide Rail Splinter Guard
$NZ27.10The Makita Replacement Rubber Strip for 3.0M Plunge Saw Rail is a genuine Makita part that is design to replace the rubber strip commonly fitted to plunge saw rails to maintain a precise and smooth cutting motion
- Makita Genuine
- Splinter Guard guide Rail
- Length: 3.0M
-
MAKITA 5PK VACUUM BAGS- SUIT VC4210
$NZ85.10The Makita® Fleece Filter Bag is designed for use with the Makita® Wet/Dry HEPA Filter Dust Extractor/Vacuum (VC4210, sold separately) to capture dust and debris. The bag features a fleece design for added durability. Like a first-stage pre-filter, the fleece filter bag captures larger particles and extends the life of the main flat filter. It installs quickly and easily for added user convenience.
-
MAKITA 75mm Hook and Loop Foam Polishing Pad, White
$NZ29.90The 75mm Hook and Loop Foam Polishing Pad (191N91-7) is designed to finish light scratches and swirls. White foam is ideal for this application. The flat pad face allows direct and continuous contact with the surface for faster material removal and reduces patterned machine swirling for a mirror-like finish. The hook and loop backing allows for quick and easy pad changes. The compact size provides control when detailing confined spaces or tight corners. The polishing pad is designed for use with the 18V LXT Brushless Polisher/Sander (DPV300, sold separately) or the 12Vmax CXT® Brushless Polisher/Sander (PV301D, sold separately)
-
MAKITA 75mm Hook and Loop Foam Polishing Pad, Yellow
$NZ23.30The 75mm Hook and Loop Sponge Polishing Pad (191N90-9) is designed to buff scratches and swirls. Yellow foam is ideal for this application. The flat pad face allows direct and continuous contact with the surface for faster material removal and reduces patterned machine swirling for a mirror-like finish. The hook and loop backing allows for quick and easy pad changes. The compact size provides control when detailing confined spaces or tight corners. The polishing pad is designed for use with the 18V LXT Brushless Polisher/Sander (DPV300, sold separately) or the 12Vmax CXT® Brushless Polisher/Sander (PV301D, sold separately)
-
MAKITA 76mm (3″) Diamond Wheel (D-77279)
$NZ14.3076mm (3″) Diamond Wheel (D-77279) is designed for cutting porcelain, tile. It is made with high-quality materials and features a 1.4mm thickness for smooth, precise cutting
- 1.4mm Thin blade increases the cutting speed
- Outer dia. 3” (76mm), Inner dia. 3/8” (9.5mm)
- 20,150min-1
- Excellent cutting speed and clean cut surface due to thin blade design
-
MAKITA 8pc 1/4″ Hex Shank Flat Wood Spade Set
$NZ51.10Hard plastic casing allowing case stacking as an option for user. This new set which contains 8 different sized flat wood spade bits also comes with a clear hard plastic top making it easy to identify your required sized flat wood spade bit
- 8 different sizes flat wood spade bits
- 1/4″ Hex Shank
- Case designed with a clear cover making it easy to identify required size
- Case specially designed hard plastic top and bottom
- Sizes: 12, 14, 16, 18, 20, 22, 25, 32mm
-
MAKITA A-94683 115M Segmented Rim Diamond blade
$NZ26.30115MM SEGMENTED DIAMOND BLADE
- Optimum bond matrix provides a faster, longer, smoother diamond blade
- Superior quality steel core
- Laser welded to ensure strongest joint possible
- Highest quality diamonds
- Segment slots help deliver a faster, cooler cut in multiple applications
- Ideal for cutting block, brick and cured concrete
-
MAKITA A-94699 125M Segmented Rim Diamond blade
$NZ32.60- Optimum bond matrix provides a faster, longer, smoother diamond blade
- Superior quality steel core
- Laser welded to ensure strongest joint possible
- Highest quality diamonds
- Segment slots help deliver a faster, cooler cut in multiple applications
- Ideal for cutting block, brick and cured concrete
-
MAKITA AWS Adaptor Set (199766-8)
$NZ295.00- Auto-start Wireless System(AWS) for on demand dust extraction
- Connects via AC power input socket on 240V dust extraction systems
- Eliminates the need to manually start dust extractor for each operation
- Adjustable metal hook and strap for convenient on-board storage
- Includes Bluetooth AWS chip
- Dimensions (L x W x H) 154mm x 71mm x 57mm
- Weight: 0.41kg
-
MAKITA B-15534 165mm 48T TCT Wood Circular Saw Blade
$NZ101.30- Blades designed specifically for Plunge Type Saws
- Available for cutting both wood and aluminium
- They are specially designed for a smooth clean cut
- Plunge saw blades carry a similar specification to the Specialized Silencer blades with a patented technology dampening vibration. The low vibration blades run truer with less wobble, easily plunging into material with little effort
-
MAKITA B-15637 255MM ALU. SAW BLADE 80T X 25.4MM
Original price was: $NZ190.10.$NZ179.00Current price is: $NZ179.00.- Excellent cutting performance in aluminium, copper, brass, bronze and other non-ferrous metals
- Also suitable for working on plastics and laminated wood
- Precision plate tensioning for a flatter blade and truer cuts
- Excellent cut quality in non-ferrous materials
- Superior performance on laminated material
Tip: Apply blade wax to tip area frequently to prevent chip build up in blade gullets when cutting non-ferrous metals
-
MAKITA B-15643 255MM ALU. SAW BLADE 100T X 25.4MM
Original price was: $NZ209.80.$NZ180.00Current price is: $NZ180.00.- Excellent cutting performance in aluminium, copper, brass, bronze and other non-ferrous metals
- Also suitable for working on plastics and laminated wood
- Precision plate tensioning for a flatter blade and truer cuts
- Excellent cut quality in non-ferrous materials
- Superior performance on laminated material
Tip: Apply blade wax to tip area frequently to prevent chip build up in blade gullets when cutting non-ferrous metals
-
MAKITA B-20971 165MM PCD BLADE
Original price was: $NZ139.90.$NZ119.00Current price is: $NZ119.00.- Polycrystalline diamond edges have been added to the tungsten carbide tips of this range of saw blades to produce long lasting product
- Suitable for cutting all densities and thickness of Fibre Cement Sheeting
- Low / Medium / High Density – All thickness, depending on the capacity of the saw being used
-
MAKITA B-30813 SAW BLADE 210MM 24T
$NZ89.90- Tip-embedded tooth designed blades are especially tough & hard wearing
- Easily cope with knotted wood and will normally cut through nail & screw embedded timber without damaging the teeth
- Especially suitable for re-claimed timber, form-work timbers & demolition work
- Will stand the work load longer than conventional tipped blades, providing less down time, greater durability and overall cutting perfomance
-
MAKITA B-30829 SAW BLADE 210MM 40T
$NZ88.90- Tip-embedded tooth designed blades are especially tough & hard wearing
- Easily cope with knotted wood and will normally cut through nail & screw embedded timber without damaging the teeth
- Especially suitable for re-claimed timber, form-work timbers & demolition work
- Will stand the work load longer than conventional tipped blades, providing less down time, greater durability and overall cutting perfomance
-
MAKITA B-64870 Starlock Wood Cutting Multitool Blade
$NZ36.20B-64870 Makita Starlock Multi Tool Blade BiM Plunge Cut Wood 32 x 50mm 14tpi
– Japanese tooth configuration minimises heat for longer life
– Bowed cutting edge increases cutting speed
– Tapered body reduces jamming & minimises wear on blade -
MAKITA B-64886 STARLOCK 32MM WOOD CUTTING MULTITOOL BLADE
$NZ25.70B-64886 – Makita Starlock Multi Tool Blade HCS Plunge Cut Wood 32 x 50mm 14tpi
– Japanese tooth configuration minimises heat for tear-free cuts
– Bowed cutting edge allows for faster plunge cutting
– Tapered body minimises jamming & removes material faster -
MAKITA B-66232 1/2″ Impact Socket Set – 9pcs
Original price was: $NZ97.50.$NZ79.00Current price is: $NZ79.00.Makita 9pc Metric Impact Socket Set 1/2″ Square Drive B-66232
Makita B-66232 impact socket set manufactured from high quality steel and suitable for 1/2″ impact wrenches supplied with pins and O rings for each socket and in a carry case
Includes 8 x 38mm 10 x 38mm 12 x 38mm 13 x 38mm 14 x 38mm 16 x 38mm 17 x 38mm 19 x 38mm 21 x 38mm
-
MAKITA B-67371 305MM EFFICUT SAW BLADE 100T
$NZ246.80EFFICUT series TCT saw blades made specially for cordless saws Ultra-thin, perfectly tensioned steel plates for true run. This saves precious battery power and life Precision honed, high-grade carbide for easy, smooth cuts and long life mm arbour ring is added
-
MAKITA D-19180 SDS+ DRILL BIT SET
Original price was: $NZ99.40.$NZ79.00Current price is: $NZ79.00.INCLUDES
17pc. Assortment 5 x 110, 6 x 110, 6 x 160, 8 x 110, 8 x 160, 8 x 210, 10 x 110, 10 x 160, 10 x 210, 12 x 160, 12 x 260, 14 x 2610, Bull Point 140 & 250, Cold Chisel 20 x 140 & 20 x 250, Scaling Chisel 40 x 250 (1pc. each)
-
MAKITA D-75596 76mm x 3/8 Carbide Grit Wheel
$NZ21.90Makita has a deep line-up of metalworking solutions. Get the right accessory for cutting applications with Makita INOX Cutting Wheels. Its designed for cutting steel and stainless steel. Innovative design produces less noise and vibration for an improved user experience and increased efficiency. High strength bonding agent and high-quality reinforcement provide improved efficiency and durability.
Features:
- Hard Metal with Tungsten Carbide 30 grit rim for increased performance and a longer blade life
- For use in cutting joint material, tile, epoxy/fiberglass, plasterboard, etc
- Multi-material cut-off disc for a variety of applications, but not recommended for metal cutting
- Carbide grit cutting edge produces less sparks and dust
- Maintains cutting diameter for more consistent cutting results and longer life
Specifications:
Diameter 76 mm Max RPM 20,150 rpm -
MAKITA E-18954 Impact XPS ¼” x50mm Socket Adapter
$NZ8.90Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS ¼” Square 150mm Socket Adapters are designed exclusively for use with high-torque impact drivers. Chamfered edges of the square drive end allows for easy installation. The high quality steel construction provides increased durability and features a matte nickel surface for best in class corrosion resistance
- Ideal for use with high torque impact drivers and driver-drills
- Chamfered edges of square drive end allow easy installation socket
- Calibrated heat treating process for added durability
- Matte Nickel surface for best in class corrosion resistance
-
MAKITA EFFICUT 165mm Multi-Purpose Blade
Original price was: $NZ129.60.$NZ99.00Current price is: $NZ99.00.E-16776 (165mm x 20mm x 54T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.5mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 35% More Efficient compared to (B-56823)
- 35% More cuts per charge compared to (B-56823)
- Centre/Arbor – 20mm
- Bush – 15.88mm
-
MAKITA EFFICUT 185mm Multi-Purpose Blade
Original price was: $NZ123.90.$NZ105.00Current price is: $NZ105.00.E-16829 (185mm x 20mm x 60T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.7mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 100% More Efficient compared to (B-15578)
- 100% More cuts per charge compared to (B-15578)
- Centre/Arbor – 20mm
- Bush – 15.88mm
-
MAKITA EFFICUT 190mm Multi-Purpose Blade
Original price was: $NZ154.20.$NZ135.00Current price is: $NZ135.00.E-16879 (190mm x 20mm x 60T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.7mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 50% More Efficient compared to (B-15615)
- 50% More cuts per charge compared to (B-15615)
-
MAKITA EFFICUT 260mm Multi-Purpose Blade
Original price was: $NZ225.00.$NZ199.00Current price is: $NZ199.00.E-07288 (260mm x 30mm x 81T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.85mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 36% More Efficient compared to (B-15637) Aluminium Blade
- 103% More cuts per charge compared to (B-15637) Aluminium Blade
- Centre/Arbor – 30mm
- Bush – 25.4mm
-
MAKITA EFFICUT 305mm Multi-Purpose Blade
Original price was: $NZ224.10.$NZ199.00Current price is: $NZ199.00.E-13269 – 305mm x 30 x 81T
20% Faster Cut Speed compared to (B-15671) Aluminium Blade
- Centre/Arbor – 30mm
- Bush – 25.4mm
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.65mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
-
MAKITA Guide Rail 1.4M (194368-5)
Original price was: $NZ202.50.$NZ175.00Current price is: $NZ175.00.The Makita 1.4M Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts
- 1,400mm guide rail for use with Makita Plunge Saw models
- Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
- Ideal for ripping sheet material
- Alternate use with select routers and circular saws, must use with router guide rail adaptor (194579-2) and saw guide rail adaptor (196953-0)
-
MAKITA GUIDE RAIL Adaptor (198673-2) – DCC501
$NZ46.50A guide rail system is a more portable solution for precision cutting, so get the right accessories for use with your Makita 1.4M and 3.0M guide rails. The Guide Rail Adapter (198673-2) is an innovative solution for accurate cutting when used with the Makita 125mm (5″) Masonry Saw models (DCC501,4100NH2ZX, 4100NH3ZX) and Guide Rails (saw and rails sold separately). The Guide Rail Adapter installs quickly and easily, and is engineered with quality materials for long service life
- Precision design for accurate cutting
- Quick and easy to install for added user convenience
- Compatible with Makita 1.4M (194368-5), 3.0M (194367-7) as well as select competitor rails
-
MAKITA Guide Rail Connector Set Twin Pack (198885-7)
Original price was: $NZ74.20.$NZ65.00Current price is: $NZ65.00.The Makita 198885-7 Guide Rail Connectors (x2 in this twin pack) are designed to join guide rails together to allow the user to make longer cuts while maintaining the accuracy they desire. The connectors install quickly for added convenience. These versatile connectors work with Makita guide rails as well as select competitor rails (please check compatibility before purchase). Makita recommends the use of x2 joining bars to securely join x2 guiderails
-
MAKITA Guide rail Quick Clamp Set (199826-6)
Original price was: $NZ207.90.$NZ175.00Current price is: $NZ175.00.The Makita 2-Pc. Clamp Set (199826-6) is engineered for use with the Makita Corded and Cordless Plunge Circular Saws and one of the Makita Guide Rails (199140-0,194925-9, E-10936 ). The clamp set is engineered to hold the guide rail securely in place. the result is a more portable option to a table saw for ripping sheet material
- Quick fix clamps to suit SP6000, DSP600 and DSP601
- Designed to clamp material to guide rail allowing a more secure working environment
- Conveniently adjustable for securing varying sized material
- Quick fix and release system
- Easy to use ratcheting
- Adjustable Length with max 150mm clamping
-
MAKITA IMPACT X Screwdriver Bit Set – 35 PC
Original price was: $NZ46.00.$NZ30.00Current price is: $NZ30.00.MAKITA® IMPACT-X™ is a line of impact-rated insert bits and fastening accessories built specifically for the demands of the professional tradesman. Professionals require commercial duty bits and fastening accessories that can endure the force of high-volume screw driving applications with high torque impact drivers. Standard screwdriving bits are brittle and fit poorly into fasteners, and in applications with high torque impact drivers this losing combo quickly leads to broken bits.
IMPACT-X™ hits back with improved fitment and increased performance with high torque impact drivers. Precision machined (not forged) tips ensure full contact fit, while performance-optimized and heat-treated S2 steel provides more flex and more durability than standard, brittle bits.
Features
- IMPACT-X™ Bits:
-
- Precision Machined Tips with superior fitment – For full contact fit and longer life
- Performance-Optimized S2 Steel Construction – For extended life
- Calibrated Heat Treating Process – For added durability
- Manganese Phosphate Surface – For advanced corrosion resistance
- Optimal Tip Geometry – For an ideal fit and improved holding power
-
- XPAND Storage System:
-
- Removable Storage Bars – Enables customisation of contents
- Rotatable Bit Keepers – Rotate up to 90° for easier bit removal
- Centre Storage Tube – Holds additional bits (up to 50 x Insert Bits)
-
- IMPACT-X™ Bits:
-
MAKITA Impact XPS #1 Square 75mm Power Bit, 2/pk (E-18677)
$NZ11.00Precision machined tips, torque absorbing power rings, an optimized torsion zone, and high quality steel combine to deliver improved overall performance and bit life
Lasts up to 100X longer than standard impact bits
Precision machined tips provide a superior full contact fit for improved holding power and longer life
Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
Heat treating process precisely calibrated for added durability
Matte Nickel surface for best in class corrosion resistance
Premium, high-grade steel composition is masterfully engineered for extended life
Laser etched for easy size identification
Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
For use with high torque impact drivers and driver-drills -
MAKITA Impact XPS #2 Pozi x 50mm Power Bit, 3/pk (E-19370)
$NZ9.10FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
Product Type : Power Bits
Tip Size : PH2
Shank Type : 1/4″ Hex
Overall length: 50mm
Package Quantity: 3pcs -
MAKITA Impact XPS #8 Slotted x 50mm Power Bit, 3/pk (E-19342)
$NZ7.60FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
Product Type : Power Bits
Tip Size : #8
Bit Fitment : Slotted
Shank Type : 1/4″ Hex
Overall length: 50mm
Package Quantity: 3pcs -
MAKITA Impact XPS 1/2″ SQ x 50mm Socket Adaptor (E-18976)
$NZ10.30FEATURES:
Ideal for use with high torque impact drivers and driver-drills
Chamfered edges of square drive end allow easy installation socket
Retention ball helps secure the socket
Heat treating process precisely calibrated for added durabilitySPECIFICATIONS:
Tip Size : 1/2″
Bit Fitment : Square SQ
Shank Type : 1/2″ Hex
Overall Length: 50mm -
MAKITA Impact XPS 3/8″ X150mm Nutsetter (E-18948)
$NZ23.40FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer lifeSPECIFICATIONS:
Tip Size : 1/4″
Bit Fitment : Hex
Shank Type : 1/4″ Hex
Overall Length: 150 -
MAKITA Impact XPS 3/8″ x50mm Socket Adapter (E-18960)
$NZ9.90Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS ¼” Square 150mm Socket Adapters are designed exclusively for use with high-torque impact drivers. Chamfered edges of the square drive end allows for easy installation. The high quality steel construction provides increased durability and features a matte nickel surface for best in class corrosion resistance
Ideal for use with high torque impact drivers and driver-drills
Chamfered edges of square drive end allow easy installation socket
Calibrated heat treating process for added durability
Matte Nickel surface for best in class corrosion resistance -
MAKITA Impact XPS 5/16″ Magnetic 65mm Nutsetter, 2/pk (E-18873)
$NZ19.60FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer lifeSPECIFICATIONS:
Tip Size : 1/4″
Bit Fitment : Hex
Shank Type : 1/4″ Hex
Overall Length: 65mm -
MAKITA Impact XPS 5/16″ X150mm Nutsetter (E-18932)
$NZ23.40FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer lifeSPECIFICATIONS:
Tip Size : 1/4″
Bit Fitment : Hex
Shank Type : 1/4″ Hex
Overall Length: 150 -
MAKITA Impact XPS 65mm Magnetic 3/8″ Nutsetter 2/pk (E-18895)
$NZ19.60Powerful magnetisation provides convenient pick-up and retention of fasteners
Lobular design drives along flats to reduce rounding of hex fasteners
Flat edges at hex opening for full contact with flanged hex head screws
Rare earth magnet increases holding power compared to standard magnets Premium, high-grade steel composition is masterfully engineered for extended life
Heat treating process precisely calibrated for added durability
Matte Nickel surface for best in class corrosion resistance
Ideal for driving hex head nuts and self-tapping screws in a wide variety of high-demand applications
For use with high torque impact drivers and driver-drills -
MAKITA Impact XPS Hex 2.5 X50mm 3/pk (E-19392)
$NZ8.40IMPACT XPS Hex 2.5 x50mm 3PK (E-19392) is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS Hex 2.5 x50mm 3PK (E-19392) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS Hex 3 X50mm 3/pk (E-19401)
$NZ8.40IMPACT XPS Hex 3 x50mm 3PK (E-19401) is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS Hex 3 x50mm 3PK (E-19401) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS Hex 4 X50mm 3/pk (E-19417)
$NZ8.00IMPACT XPS Hex 4 x50mm 3PK (E-19417) is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS Hex 4 x50mm 3PK (E-19417) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS HEX-5 X50mm Drive bit, 3/pk (E-19423)
$NZ8.40Impact XPS HEX-5mm Drive bit, 3/pk (E-19423) is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. Impact XPS HEX-5mm Drive bit, 3/pk (E-19423) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS Impact Bit Set 29/pk (E-19261)
Original price was: $NZ98.30.$NZ75.00Current price is: $NZ75.00.Makita’s new XPS range of screwdriver bits & holders provided with pulse torsion zone technology, is the next generation of premium fastening accessories for trade use, engineered to withstand the high torque provided by current impact drivers as well as for use in drill/drivers and screwdrivers. The Impact XPS series is expertly engineered to the highest quality for exceptional product life, meaning less wasted time for trades due to broken bits. Three unique features combined together, deliver a performance life of up to 90 times longer than standard screwdriver bits – Exact Fitment, Pulse Torsion Ring and Zone, & Unique Steel Blend. These three unique features combined, deliver a performance life of up to 90 times longer than standard bits. The Impact XPS range is also provided with a matte nickel coating for increased corrosion resistance
-
MAKITA Impact XPS PH-1 x 150mm Power Bit (E-19071)
$NZ8.70FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Bit Fitment : Phillips
- Shank Type : 1/4″ Hex
- Tip Size : PH1
- Overall Length: 150mm
- Package Quantity: 1pc
-
MAKITA Impact XPS PH-2 x 150mm Power Bit (E-19087)
$NZ8.70- Precision machined tips, torque absorbing power rings, an optimised torsion zone, and high quality steel combine to deliver improved overall performance and bit life
- Lasts up to 100X longer than standard impact bits
- Precision machined tips provide a superior full contact fit for improved holding power and longer life
- Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
- Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
- Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
- Heat treating process precisely calibrated for added durability
- Matte Nickel surface for best in class corrosion resistance
- Premium, high-grade steel composition is masterfully engineered for extended life
- Laser etched for easy size identification
- Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
- For use with high torque impact drivers and driver-drills
-
MAKITA Impact XPS PH-2 x 50mm Bits 3/pk (E-18443)
$NZ7.80- Precision machined tips, torque absorbing power rings, an optimized torsion zone, and high quality steel combine to deliver improved overall performance and bit life
- Lasts up to 100X longer than standard impact bits
- Precision machined tips provide a superior full contact fit for improved holding power and longer life
- Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
- Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
- Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
- Heat treating process precisely calibrated for added durability
- Matte Nickel surface for best in class corrosion resistance
- Premium, high-grade steel composition is masterfully engineered for extended life
- Laser etched for easy size identification
- Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
- For use with high torque impact drivers and driver-drills
-
MAKITA Impact XPS PH-2 x 75mm Driver Bit 2/pk (E-18627)
$NZ11.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Bit Fitment : Phillips
- Shank Type : 1/4″ Hex
- Tip Size : PH2
- Overall Length: 75mm
- Package Quantity: 2pcs
-
MAKITA Impact XPS PH-3 x150mm 1/pk (E-19093)
$NZ8.70- Precision machined tips, torque absorbing power rings, an optimized torsion zone, and high quality steel combine to deliver improved overall performance and bit life
- Lasts up to 100X longer than standard impact bits
- Precision machined tips provide a superior full contact fit for improved holding power and longer life
- Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
- Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
- Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
- Heat treating process precisely calibrated for added durability
- Matte Nickel surface for best in class corrosion resistance
- Premium, high-grade steel composition is masterfully engineered for extended life
- Laser etched for easy size identification
- Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
- For use with high torque impact drivers and driver-drills
-
MAKITA Impact XPS SQ-1 150mm 1/pk (E-19102)
$NZ8.40FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
Size: 150mm Bits: 1pc -
MAKITA Impact XPS SQ-2 75Mm 2/pk (E-18683)
$NZ11.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Size: 75mm
- Bits: 2pk
-
MAKITA Impact XPS SQ-2 x 50mm 3/pk (E-18502)
$NZ8.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Size: 50mm
- Bits: 3pcs
-
MAKITA Impact XPS SQ-2 x150mm 1/pk (E-19118)
$NZ8.70FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Size: 150mm
- Bits: 1pk
-
MAKITA Impact XPS SQ-3 50mm 3/pk (E-18524)
$NZ8.20Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The IMPACT XPS SQ3 50mm 3PK (E-18524) are designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS SQ3 50mm 3PK (E-18524) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS SQ-3 75mm 2/pk (E-18708)
$NZ11.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Size: 75mm
- SQ3
- Bits: 2pcs
-
MAKITA Impact XPS T20 Torx 50mm Power Bit, 3/pk (E-18552)
$NZ7.80Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS T20 Torx 50mm Power Bit, 3/pk (E-18552) are designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. Impact XPS T20 Torx 50mm Power Bit, 3/pk (E-18552) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS T25 Torx 150Mm 1/pk (E-19146)
$NZ7.20Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The IMPACT XPS T25 TORX 150mm 1PK (E-19146) are designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS T25 TORX 150mm 1PK (E-19146) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
