ACCESSORIES
- You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart. View cart
-
GFB Adjustable Countersink Bit for 8g Screws
$NZ59.10ADJUSTABLE COUNTERSINK BIT FOR 8g SCREWS
Designed for the effective countersinking of hard wood, soft wood and pine, MDF, particle board and cement sheets./p>
Features
- Ball Bearing depth stop prevents marking of material
- Tungsten carbide tipped for a cleaner cutting edge
- Extra wide clearance to stop jamming
- 1/8″ Pilot drill
- 3/8″ Countersink
- Bonus replacement drill bit included
-
GFB Magnetic Insert Bit Holder
Original price was: $NZ16.50.$NZ15.00Current price is: $NZ15.00.GFB Bit holders are manufactured to the highest specifications as required by top-line industries such as Aviation.
Specifications
- Type: Magnetic Bit Holder 1/4 inch hex shank
- Length: 75mm
- Fitting for 1/4 inch hex bits
- 1 Piece pack on card
-
HIKOKI 1600mm Guide Rail (Suits C3606DPA)
$NZ253.00For straight and secure guidance Splinter protection reduces breakout when sawing Adhesive coating for safe, non-slip surface contact as well as protection of the workpiece surface With holes to fix the rail to the workpiece and for hanging storage Can be extended in length with the second guide rail and FSV connector (accessory). Part Number FS160INBAG supplied by sister brand Metabo Power Tools.
-
HOLER Composite EDGE Angle Grinder Dust Shroud | EU edt. | 175mm
$NZ299.00- Made of cast composite, our custom made dust shroud has been carefully developed with no compromises in design or materials used
- The built-in rubber diaphragm ensures self-levelling of the dust shroud regardless of the segment height
- Adjustable built-in air vent to reduce vacuum pressure if suction of vacuum cleaner is too strong
- Replaceable Nylon wear strips have been fitted to prolong the lifetime of shroud
- The unique flip top front allows edge grinding right up to the edge 99% dust free. No tools are required to open or close the mouth piece.
- US/Canada edition also available with special imperial threaded nuts, please enquire
175 mm
- Vacuum nozzle: ID35 mm / +OD35 mm OD50 mm
- Fits Makita, Hitachi, Bosch M14 and DeWalt
-
HOLER DIAMOND Cup Wheel | HAMMERHEAD*** | 175mm | ORANGE | PCD
Original price was: $NZ489.50.$NZ369.00Current price is: $NZ369.00.PR Raptor: Large segment PCD diamond cup grinder for effective grinding of thick and sticky paint, glue, Vinyl, Cork, Bitumen Sealer & glue. This cup will gauge and groove the surface and is best suited for heavy duty removal or floor prep!
Thick Coatings | Vinyl & Cork | Tile Screed Suitable Angle grinders Quality Premium*** Application Wet & Dry Standard Bore 22.2 -
Holer Dust shroud | Grinder 175mm | Steel | Basic
$NZ236.90Protect your lungs and the people around you! This custom designed shroud is suitable to attach to most dry vacuum units for dust extraction when grinding concrete, sanding wood and plaster board or any other dust. The simple collar and screw adjustment means it can be fitted to most angle grinders or sanders. The featured Velcro backed skirt can be adjusted to accommodate various backing pad or diamond cup grinder heights. Designed and Made in New Zealand. CE approved, complies 2006/42/EC.
GRINDER NOT INCLUDED
-
HOLER FLUSH CUT DIAMOND BLADE 125MM M14
Original price was: $NZ119.80.$NZ99.00Current price is: $NZ99.00.Whisper Cut DCU(S)** designed for cutting Concrete & Universal material as well as Granite & Hard Stone. Features the Whisper steel core with air holes for reduced noise and extra cooling.
Enables flush cutting into masonry materials.
-
HOLER STEEL 125mm ANG. GRINDER DUST SHROUD
$NZ159.00- This custom designed shroud is suitable to attach to most dry vacuum units for dust extraction when grinding concrete, sanding wood and plaster board or any other material creating dust
- The simple collar and screw adjustment means it can be fitted to most angle grinders or sanders
- The featured Velcro backed skirt can be adjusted to accommodate various backing pad or diamond cup grinder heights
- Designed and Made in New Zealand. CE approved, complies 2006/42/EC.
125 mm
- Collar size: 42 mm
- Vacuum nozzle: ID35 mm / OD38 mm
- Fits most angle grinders and sanders
-
KANZAWA L-Shaped Angle Drill
Original price was: $NZ212.40.$NZ199.00Current price is: $NZ199.00.Features:
- L-Shaped 90-degree angle drill attachment.
- Ideal for drilling holes in tight spaces and corners.
- Used in carpentry, electrical, plumbing, and car repair work.
- 10mm chuck.
- Handle attachment on three sides for enhanced maneuverability.
- Reversible design allows easy drilling in all directions.
- Made in Japan.
Specifications:
- Length: 117mm
- Width: 89mm
- Depth: 36mm
- Handle Length: 69mm
- Angle: 90-degree
- Chuck: 10mm
- Shank: 8mm
- Weight: 446g
-
KANZAWA L-Shaped Angle Screw Driver
Original price was: $NZ176.30.$NZ159.00Current price is: $NZ159.00.Features:
- A 90-degree attachment for 18v power impact drivers.
- Ideal for screwing in narrow and hard-to-reach areas.
- Capable of driving coarse threads up to 75mm effortlessly.
- Compact design with a head depth of 50mm for tight spaces.
- Handle attachment on three sides enhances maneuverability.
- Comes with 2 PH2 x 25mm bits, one encased in the handle.
- Easy Quick-Change 6.35mm hex shank.
- Made in Japan.
Specifications:
- Length: 125mm
- Width: 26mm
- Depth: 50mm
- Handle Length: 69mm
- Angle: 90-degree
- Shank: 6.35mm
- Weight: 253g
-
LENOX 26PC BI-METAL HOLESAW KIT
Original price was: $NZ526.40.$NZ399.00Current price is: $NZ399.00.IMPROVED METAL CUTTING PERFORMANCE
Increased wall thickness improves durability and minimizes tooth loss
Optimized tooth design penetrates metal with easeFAST, EFFICIENT CUTTING IN WOOD
Larger, sharper teeth remove more wood for fast cuttingEASY PLUG REMOVAL
Speed Slot staircase design for fast, easy plug ejection*vs. Prior LENOX Generation
-
Linishall Model 036P Belt and Disc Sander Attachment
$NZ289.00Supplied with full installation instructions.
- Fits easily to most 200mm (8”) and 250mm (10″) bench grinders that have screw-on wheel guards
- Belt size: 915 mm x 50 mm (36”x2”)
- Disc size: 178 mm (7”)
- Rugged cast metal construction
- Simple assembly & adjustment
- Longer rubber contact wheel life
- Easy belt tracking with no tools required
-
MAKITA 1.0M Guide Rail (199140-0)
Original price was: $NZ141.80.$NZ119.00Current price is: $NZ119.00.The Makita 1.0M Plunge Saw Guide Rail (199140-0), when used with a Makita Plunge / Circular Saw is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge / Circular Saw (not included) to provide smooth, dead-on straight cuts
- 1.0M guide rail for use with Makita Plunge / Circular Saw models
- Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
- Ideal for ripping sheet material
- Alternate use with select routers and circular saws, must use with router guide rail adaptor (194579-2) and saw guide rail adaptor (196953-0)
-
MAKITA 1.4-1.5m Guide Rail holder (E-05664)
Original price was: $NZ133.40.$NZ109.00Current price is: $NZ109.00.- Universal size to hold both sizes of guide rails: 1,4m and 1,5m
- Protects your guide rails from scratches and shakes during transport or storage
- Strap Belt System belt included
- Designed to be durable but lightweight
- Designed to hold various sizes of guide rails safely
- Constructed of heavy-duty 1680D polyester with foam lining for extreme durability
-
MAKITA 100mm Crimped Wire Bevel Brush, M10 x 1.5 (D-77556)
$NZ16.20Makita Crimped Wire Bevel Brushes are designed to work with angle grinders for a variety of material removal applications. It is ideal for grooves, curves and corners, and for efficient action on irregular objects
- Ideal for grooves, curves, and corners
- Efficient action on irregular objects
- Ideal for side cleaning action
- rust-resistant stainless steel wire diameter 0.3mm
- Max RPM 12,500
- For use with angle grinders
-
MAKITA 100mm Dust collecting wheel guard
Original price was: $NZ129.80.$NZ110.00Current price is: $NZ110.00.- For 100mm models
- Adjustable depth stops for added convenience
- Plunge feature allows for maximum material removal
- Adjustable line of cut indicator
- 38 mm Ø Dust port can be adjusted 360° for added versatility
- Clear viewing window for improved visibility
Specifications:
- Max depth Cut: 23mm
- Dust Port: 38mm Ø *Size: 100mm
Includes:
1 x Allen Key 1 x Vacuum Hose Clip 1 x Allen Key Holder
-
MAKITA 1140mm 10T Band saw blade
Original price was: $NZ50.20.$NZ45.00Current price is: $NZ45.00.Makita® Band Saw Blades featuring bi-metal construction last longer than carbon blades for added user convenience and value. These blades are designed to cut a wide variety of materials including non-ferrous metal, mild steel, cast steel, and stainless steel. They have a wavy tooth set to make clean cuts in sheets, tubes, and pipes. These blades are for use with the Makita 18V /40V Portable Band Saw model DPB180 PB002G sold separately)
- Designed to cut Plastics, Non-ferrous metal, Mild steel, Cast steel and cast iron, Hard steel and stainless steel
- For use with the Makita 18V /40V Portable Band Saw model DPB180 PB002G
- 1140mm x 13mm x 0.5mm
-
MAKITA 115 x 1.0 x 22.23mm INOX Metal / Stainless Cut Off Disc – 25 Pack
Original price was: $NZ64.30.$NZ50.00Current price is: $NZ50.00.- 1.0mm Thin cutting for improved efficiency
- A60U-BF Grit (U denotes hardness for longer life)
- Suitable for Stainless Steel Cutting for constructors / metal workshop workers / plumbers
- For use with 115mm (5″) Angle Grinders
-
MAKITA 125mm (5″) Dust collecting wheel guard
Original price was: $NZ141.00.$NZ119.00Current price is: $NZ119.00.- Replacement angle grinder guard allowing connection to suitable dust extraction unit for reduced airborne dust particles
- Compatible with most Makita 115mm (4½”) and 125mm (5″) cordless and mains angle grinders
- Not Compatible with XGT 125mm (5″) Grinders and GA5050
-
MAKITA 125mm (5″) Dust collecting wheel guard
$NZ177.70The Makita 125mm Dust Extracting Tuck Point Guard is designed to work with Makita 5″ 125mm Angle Grinders for tuck pointing applications. The cover features adjustable depth stops for more efficient work. The viewing window and guide make it easier for the user to make precision cuts
-
MAKITA 125mm (5″) XGT Plunge Diamond wheel guard
Original price was: $NZ177.70.$NZ159.00Current price is: $NZ159.00.The 125mm Tool-Less Dust Extraction Cutting/Tuck Point Guard is designed to work with Makita® 115mm / 125mm Angle Grinders with quick guard rotation. This guard is for use in tuck pointing applications, allowing maximum material removal and up to 25.4mm cutting depth when used with a 125mm blade. The cover features adjustable depth stops for more efficient work. The clear viewing window and guide make it easier for the user to make precision cuts. It features a tool-less design for easy installation and adjustments ( not suitable for use with X-LOCK)
-
MAKITA 180mm (7″) Dust collecting wheel guard
Original price was: $NZ208.10.$NZ189.00Current price is: $NZ189.00.- Easy-to-see adjustable guide for greater accuracy
- Dust port can be adjusted 360 degrees for added versatility
- Cover pivots open for easy wheel changes
- Attachment point on both sides for optional handle
- Durable, high quality metal construction for long life and added durability
- Base plate features a rounded lead edge for easier movement while making cuts
- Installs quickly and easily for added user convenience
- For use with Makita (7″) 180mm to (9″) 230mm Grinders
-
MAKITA 1910U0-9 1 Litre Chainsaw Biotop Bar Oil
$NZ15.60Bar guard saw chain oil brings high technology to chain saw lubrication. It’s unique formula resists flinging and provides superb lubrication to both the bar and chain. Special adhesive properties ensure excellent fling resistance and low maintenance
- Biological chain saw oil
- Fast bio-degradable
- Not harmful to ground water
- Good adhesion
- Universal use all year round from summer or winter
- Durable for at least 2 years from filling when stored in dry conditions
- Good corrosion protection
-
MAKITA 250mm (10″) Saw Chain, 3/8″ LP, .043″ (191H00-0)
$NZ31.30The Makita® (191H00-0) 10″ 250mm Saw Chain, 3/8″ LP, .043″ Saw Chain is ideal for professional, commercial or occasional users. This low-vibration saw chain is designed for improved comfort when cutting. Twin cutting corners provide improved cutting performance and durability. Oil holes help carry oil around the full length of the guide bar for improved lubrication. It installs quickly for operator convenience
-
MAKITA 3.0M guide Rail Splinter Guard
$NZ27.10The Makita Replacement Rubber Strip for 3.0M Plunge Saw Rail is a genuine Makita part that is design to replace the rubber strip commonly fitted to plunge saw rails to maintain a precise and smooth cutting motion
- Makita Genuine
- Splinter Guard guide Rail
- Length: 3.0M
-
MAKITA 5PK VACUUM BAGS- SUIT VC4210
$NZ85.10The Makita® Fleece Filter Bag is designed for use with the Makita® Wet/Dry HEPA Filter Dust Extractor/Vacuum (VC4210, sold separately) to capture dust and debris. The bag features a fleece design for added durability. Like a first-stage pre-filter, the fleece filter bag captures larger particles and extends the life of the main flat filter. It installs quickly and easily for added user convenience.
-
MAKITA 75mm Hook and Loop Foam Polishing Pad, White
$NZ29.90The 75mm Hook and Loop Foam Polishing Pad (191N91-7) is designed to finish light scratches and swirls. White foam is ideal for this application. The flat pad face allows direct and continuous contact with the surface for faster material removal and reduces patterned machine swirling for a mirror-like finish. The hook and loop backing allows for quick and easy pad changes. The compact size provides control when detailing confined spaces or tight corners. The polishing pad is designed for use with the 18V LXT Brushless Polisher/Sander (DPV300, sold separately) or the 12Vmax CXT® Brushless Polisher/Sander (PV301D, sold separately)
-
MAKITA 75mm Hook and Loop Foam Polishing Pad, Yellow
$NZ23.30The 75mm Hook and Loop Sponge Polishing Pad (191N90-9) is designed to buff scratches and swirls. Yellow foam is ideal for this application. The flat pad face allows direct and continuous contact with the surface for faster material removal and reduces patterned machine swirling for a mirror-like finish. The hook and loop backing allows for quick and easy pad changes. The compact size provides control when detailing confined spaces or tight corners. The polishing pad is designed for use with the 18V LXT Brushless Polisher/Sander (DPV300, sold separately) or the 12Vmax CXT® Brushless Polisher/Sander (PV301D, sold separately)
-
MAKITA 76mm (3″) Diamond Wheel (D-77279)
$NZ14.3076mm (3″) Diamond Wheel (D-77279) is designed for cutting porcelain, tile. It is made with high-quality materials and features a 1.4mm thickness for smooth, precise cutting
- 1.4mm Thin blade increases the cutting speed
- Outer dia. 3” (76mm), Inner dia. 3/8” (9.5mm)
- 20,150min-1
- Excellent cutting speed and clean cut surface due to thin blade design
-
MAKITA 8pc 1/4″ Hex Shank Flat Wood Spade Set
$NZ51.10Hard plastic casing allowing case stacking as an option for user. This new set which contains 8 different sized flat wood spade bits also comes with a clear hard plastic top making it easy to identify your required sized flat wood spade bit
- 8 different sizes flat wood spade bits
- 1/4″ Hex Shank
- Case designed with a clear cover making it easy to identify required size
- Case specially designed hard plastic top and bottom
- Sizes: 12, 14, 16, 18, 20, 22, 25, 32mm
