HANDTOOLS
-
PICA VISOR LONGLIFE BOARD MARKER RED
VISOR Longlife Board Marker “DRY-ERASE Crayon” for Industry and Office. THE MARKER, WHICH NEVER DRIES OUT. For industrial use, especially for temporary marking on all glossy material surfaces. For office-use, especially on whiteboard and flip chart at the same time.
-
POWERBUILT 1/2” Dr 30pc 6pt Metric Standard Dual Impact Socket Sets
Thin wall design, impact rated
Use with both impact and hand tools
Chrome molybdenum steel, black finish
Offers Z-Drive contacting the flat walls of fasteners for stronger grip
Packaged in a metal storage case
½” Dr Industrial Gear to Gear Ratchet (45T)
Sockets (6pt) 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm, 29mm, 30mm, 32mm, 33mm, 34mm, 35mm, 36mm
Extension bars 75mm & 150mm -
RENNSTEIG PARALLEL PIN PUNCH -150 X 4MM
- Used for removing pins in parallel holes. Designed to punch holes when struck by a hammer
- High bending resilience for longer service life and higher elasticity
- Ground and polished surface
- Rennsteig punches are made of chrome vanadium steel
- Forged, quenched and tempered as a whole to guarantee good resiliency and long service life
- Made in Germany
-PICTURE SHOWN NOT ACTUAL SIZE
-
RENNSTEIG PARALLEL PIN PUNCH -150 X 6MM
- Used for removing pins in parallel holes. Designed to punch holes when struck by a hammer
- High bending resilience for longer service life and higher elasticity
- Ground and polished surface
- Rennsteig punches are made of chrome vanadium steel
- Forged, quenched and tempered as a whole to guarantee good resiliency and long service life
- Made in Germany
-
STABILA 96-2-1200 1200MM SPIRIT LEVEL
On site a level can get dropped and has to take a lot of hard wear. So, it’s important that the level stays accurate job after job. With two vertical vials it helps you take a reading in any position. The tough reinforced aluminum profile, together with the STABILA locked vial system is the ideal combination on any harsh building site. Because the purpose of our levels is to be accurate and stay accurate.
-
STABILA 96-2-600 600MM SPIRIT LEVEL
On site a level can get dropped and has to take a lot of hard wear. So, it’s important that the level stays accurate job after job. With two vertical vials it helps you take a reading in any position. The tough reinforced aluminum profile, together with the STABILA locked vial system is the ideal combination on any harsh building site. Because the purpose of our levels is to be accurate and stay accurate.
-
STANLEY® 1991 Utility Blade (Pack Of 5)
- STANLEY® Original 1991 utility knife blade for every-day, general purpose use.
- EVERY DAY GENERAL USE: The 1991 blade is suitable for cutting most light sheet materials, paper and cardboard.
- SHARP, DURABLE DESIGN: Hardened and tempered for high sharpness and long life.
-
STANLEY® 99E Classic Retractable Blade Utility Knife
- STANLEY® 99E Classic Retractable Blade Utility Knife – STANLEY’s original retractable utility knife since 1952.
- DURABLE DESIGN: Precision die cast zinc body both strong and lightweight
- ACCURATE CUTTING: InterLock® nose firmly secures the blade into the knife for safe, accurate cuts
-
STANLEY® DYNAGRIP® Combination Pliers (200mm)
- HEAVY DUTY CONSTRUCTION: Manufactured from drop-forged steel for strength and durability
- CORROSION-RESISTANT: Black oxide finish helps resist corrosion for extended product life
- THREE-ZONE HANDLE: Ergonomically designed Three-Zone Bi-material grips for comfort and control
-
STANLEY® FATMAX® Automatic Wire Stripper
- AUTOMATIC WIRE STRIPPER: For copper or aluminum cables up to 10mm² (multiple cables) and up to 6mm² (single cables)
- ERGONOMIC GRIP AND MORE EFFICIENCY: Possibility of stripping wires with a diameter of 0.2 to 6mm² – The pliers automatically adjust their jaws to the diameter of the wire
- ADJUSTABLE WIRE STOP: Adjustments via fine adjustment screw
-
STANLEY® FATMAX® BladeArmor™ 10M (32mm wide) Tape Measure
- DURABLE BLADE: Abrasion resistant polyester film coated blade coating provides up to 10 times more resistance to abrasion than a standard lacquered blade, increasing the life of the tape and reducing wear on most heavily used sections of the blade.
- BladeArmor™ Coating: reinforces the first 7.5cm of the blade, the section most vulnerable to wear.
- GREATER REACH: 32mm blade width and extended reach of 4.2 metres to help you measure confidently from a distance, even when working alone.
-
STANLEY® FATMAX® BladeArmor™ 8M (32mm wide) Tape Measure
- DURABLE BLADE: Abrasion resistant polyester film coated blade coating provides up to 10 times more resistance to abrasion than a standard lacquered blade, increasing the life of the tape and reducing wear on most heavily used sections of the blade.
- BladeArmor™ Coating: reinforces the first 7.5cm of the blade, the section most vulnerable to wear.
- GREATER REACH: 32mm blade width and extended reach of 4.2 metres to help you measure confidently from a distance, even when working alone.
-
STANLEY® FATMAX® BladeArmor™ Magnetic 8M (32mm wide) Tape Measure
- DURABLE BLADE: Abrasion resistant polyester film coated blade coating provides up to 10 times more resistance to abrasion than a standard lacquered blade, increasing the life of the tape and reducing wear on most heavily used sections of the blade.
- BladeArmor™ Coating: reinforces the first 7.5cm of the blade, the section most vulnerable to wear.
- GREATER REACH: 32mm blade width and extended reach of 4.2 metres to help you measure confidently from a distance, even when working alone.
-
STANLEY® FATMAX® Left Cut Aviation Snips
- STANLEY® FATMAX® Left Cut Aviation Snips with compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- FORGED CHROME MOLYBDENUM STEEL CUTTING BLADES: For strength and durability
-
STANLEY® FATMAX® Left Cut Offset Aviation Snips
- STANLEY® FATMAX® Left Cut Offset Aviation Snips with compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- OFFSET ANGLED BLADES: Provide clearance between the handles and the cutting material
-
STANLEY® FATMAX® Right Cut Aviation Snips
- RIGHT CUT AVIATION SNIPS: With compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- FORGED CHROME MOLYBDENUM STEEL CUTTING BLADES: For strength and durability
-
STANLEY® FATMAX® Right Cut Offset Aviation Snips (Green)
- RIGHT CUT OFFSET AVIATION SNIPS: With compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- OFFSET ANGLED BLADES: Provide clearance between the handles and the cutting material
-
STANLEY® FATMAX® Screwdriver Regular Ratchet with 12 Bits
- FINE 45-TOOTH RATCHET: Delivers extremely high torque with a 9° working arc
- BI-MATERIAL HANDLE: For grip, comfort and high torque loads
- INTERNAL BIT STORAGE: For safe and easy bit storage – keeps bits close to hand
- MAGNETIC HEAD: Enables efficient bit retention and rapid changing of accessories and prevents bit loss
- 3 POSITION RATCHET: Enables clockwise, anti-clockwise and locked ratcheting positions with left, right and central fixed options
- ROBUST FROSTED BAR: Ensures outstanding product life
-
STANLEY® FATMAX® Side Strike Wood Chisel (25mm)
- STANLEY® FATMAX® Sidestrike Wood Chisel features NEW cutting edge on side of the blade for demolition Work, also allowing the chisel to double as a spokeshave
- Hardened, tempered carbon chrome steel blade for edge retention
- Sharpened side edge for chopping out, cutting, shaving and shaping
- Hardened strike cap and strike surface for durability
- Bi-Material handle for grip and comfort
- Steel core for strength & durability
-
STANLEY® FATMAX® Straight Cut Aviation Snips
- STANLEY® FATMAX® Straight Cut Aviation Snips with compound cutting action and serrated cutting blades cut up to 18-gauge cold rolled or 23-gauge stainless steel
- DOUBLE PIVOT ACTION: Higher cutting power
- FORGED CHROME MOLYBDENUM STEEL CUTTING BLADES: For strength and durability
-
STANLEY® FATMAX® Thru Tang Wood Chisel 6 Piece Set (6,12,18,25,32,38mm)
- STANLEY® FATMAX® Thru-Tang Wood Chisels are 50% stronger than old DynaGrip Pro Chisel on handle side impact test
- Hardened, tempered high-chrome carbon alloy steel blade for edge retention
- Ergonomic Bi-Material soft grip handle – for maximum grip and control
-
STANLEY® FATMAX® TradeLift™
- GET MORE DONE – SOLO: Ideal for jobs where one person isn’t quite enough, with heavy-duty performance delivering up to 150kg lifting force with up to 220mm lifting capacity
- MULTIPLE TRADE APPLICATIONS: Lifts, levels, holds and spreads easily and safely for multiple applications across kitchen, floor, door and window fitting, carpentry, joinery, drywall and general construction work
- FOOT OPERATION FOR EASY HANDS-FREE LIFTING: Safe and easy to use, reducing the risk of injury and accidents when levelling and holding heavy or awkward items such as sheet materials, doors and large appliances
-
STANWAY 180mm Aluminium Rafter Square
This trade quality 180mm Stanway Aluminium Rafter Square is precision designed and made from aluminium to ensure strength, durability, and long life. CNC machined edges for guaranteed accuracy. This rafter square has a anodized matte black protective finish with easy-to-read laser etched bold white markings. This square uses metric millimetre markings/measurements. A common rafter conversion table is included on rafter square which has been laser etched on one side. Suitable for all trades people and the serious DIY users.
-
STANWAY 250mm Flat Bastard Cut File
Flat file type with bastard cut used for general purpose deburring, sharpening and shaping. For use on iron and steel. Double cut on sides and Single cut on edges.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 24mm
- Blade Depth: 5.5mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 250mm Half Round Bastard Cut File
Used for flat, convex and concave surfaces. Double cut used with slightly heavier pressure that removes material faster. Bastard cut for general purpose deburring, sharpening and shaping.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 24mm
- Blade Depth: 7mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 250mm Half Round Wood Rasp File
Half round in shape for flat, convex and concave surfaces. Used on materials such as wood and soft metals. Has a much coarser rasp-type surface, for rapid removal and shaping.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 24.5mm
- Blade Depth: 7mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 250mm Mill Bastard File One Round Edge
Used for sharpening mill or circular saws. Has one round edge used for rounding gullets. Single cut used with light pressure for more precision. Has a bastard coarseness; teeth spaced apart.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 24mm
- Blade Depth: 4.5mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 250mm Round Bastard File
Round in cross-section, primarily used for enlarging holes, and scalloping concave surfaces. Bastard cut for general purpose deburring, sharpening and shaping.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 9mm
- Blade Depth: 9mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 300mm Aluminium Rafter Square
This trade quality 300mm Stanway Aluminium Rafter Square is precision designed and made from aluminium to ensure strength, durability, and long life. CNC machined edges for guaranteed accuracy. This rafter square has a anodized matte black protective finish with easy-to-read laser etched bold white markings. This square uses metric millimetre markings/measurements. A common rafter conversion table is included on rafter square which has been laser etched on one side. Suitable for all trades people and the serious DIY users.
-
STANWAY 300mm Heavy Duty Combination Square
The Stanway Heavy Duty Combination Square is the perfect tool for your next woodworking, stonemasonry, or metalworking job! This square is designed for many uses such as an outside or inside try square, a mitre square or a depth and marking gauge. Very accurate, reliable, and easy to use. Features a ruler adjustment locking nut, a spirit level and a built-in scriber for surface marking. Durably etched, heavy-duty cast iron ruler is rust resistant and built to last. Blade is marked with metric 1mm graduations on each side of ruler. Suitable for all trades people and the serious DIY users.
-
STANWAY 30m Long Steel Tape
The Stanway Long Steel Tape Measure is engineered with a heavy-duty, impact and shock resistant ABS casing with a protective rubber bumper and a yellow steel blade, protected with a nylon coating. This tape measure is ergonomically designed for high usability due to its strong grip and its 3:1 winding mechanism for faster blade retraction. This tape also features a reinforced hook with a rubberised plastic ring, 31: geared non-finger nipping winding handle, and a fixed hook and ring. Suitable for all trades people and the serious DIY users.
-
STANWAY White Folding Rule (1m x 18mm)
The Stanway White Folding Rule is a versatile and durable tool crafted from hard-wearing ABS plastic. Its clever 4-fold compact design makes it incredibly convenient for storage, fitting easily into toolboxes or pockets when not in use. When unfolded, this rule extends to an impressive 1 meter in length, providing ample reach for various measuring tasks. The 18mm wide blade boasts a bevelled edge, ensuring precise marking on surfaces. Millimeter graduations further enhance its accuracy, making it indispensable for carpenters, craftsmen, and DIY enthusiasts alike. Whether you’re building furniture or tackling home improvement projects, the Stanway White Folding Rule is the ideal companion for accurate and efficient measurements.
-
STARRETT 505A-12 300mm (12″) Aluminium Mitre Protractor
The popular Pro-Site™ 505 protractor family consists of two 300mm (12″) combination protractors, a 300mm (12″) mitre protractor and two 175mm (7″) mitre protractors. The combination protractors take the guesswork out of these functions: mitre cuts, single cuts, compound mitre cuts, included conversion table, protractor and roof pitches. The mitre protractors are ideal for carpenters, plumbers and all building trades that require the measuring and transferring of angles.
-
STARRETT 505P-7 175mm (7″) Plastic Mitre Protractor
The 175mm (7″) Plastic Mitre Protractor takes error-prone calculations out of the process of mitre cuts. This tool is ideal for carpenters, plumbers and all building trades that require the measuring and transferring of angles, plus is invaluable for home use. This hardened plastic mitre protractor offers all the same functionality as the 505A-7 aluminium protractor.
-
Sterling Ultimax Tape Measure 8M x 25mm Metric
Sterling Ultimax Tape Measure 8m x 25mm Metric
Premium rubber grip
Double sided blade printing
High impact resistant ABS casing with non-slip grip
Reinforced 4 rivet dual-hook
25mm wide blade for super standout
Superior internal mechanism for smooth operation
Layered nylon blade for maximum durability
-
STILETTO FB11G 11-1/2″ Titanium Glazer Bar
The STILETTO® 11-1/2″ Titanium Glazer Bar is strong and lightweight. It is recommended for setting windows and doors, moderate prying, and scraping. This Glazer Bar features a 180° side nail puller that allows you to pull 6D-16D nails with ease.
- 8.5oz Solid Titanium Bar with Strong Arch Design
- Staple Puller Grabs 3/16″ Pre-Hung Door Staples Easily
- Two “Multi-Fulcrum” Nail Pullers Designed to Increase Leverage
- Built-In Bottle Opener
-
STILETTO FH10C 10oz Smooth/Curved Hickory Hammer
The STILETTO® 10oz Titanium Hickory Finish Hammer with Smooth Face and 14.5″ Curved Handle is made with shock-absorbing USA Hickory. This 10oz titanium hammer hits like a 16oz steel hammer with 45% less weight and 10x less recoil shock. It is recommended for finish carpentry, remodeling, and light framing. The Titanium Hickory Finish Hammer includes a magnetic nail starter and replaceable handle.
- 10oz Titanium Head Hits Like a 16oz Steel Head
- Replaceable USA Made Hickory Handle
- Magnetic Nail Starter
- Straight Claw Design
-
STILETTO TB3SC TIBONE™ III Smooth/Curve Titanium
The STILETTO® 15oz TIBONE™ III Hammer with Smooth Steel Face and 18″ Curved Handle is our most powerful and most durable hammer. This 15oz full titanium hammer hits like a 28oz steel hammer, with 45% less weight and 10x less recoil shock. It is recommended for rough framing, remodeling, and pole barn construction. The TIBONE™ III features a 180° side nail puller that allows you to pull 6D-16D nails with ease and includes a magnetic nail starter.
-
STILETTO TBRG-G Green Replacement Grip
The STILETTO® Green Replacement Grip extends the life of your hammer while providing a personal touch. It is easy to install and remove on the jobsite with minimal tools. The STILETTO® Replacement Grip is available in 5 colors and includes a Black Oxide T25 Bolt, Nylon Locking Nut, and External Tooth Lock Washer.
