HANDTOOLS
-
Teng MD TT-MV+ Screwdriver ROB#1 x 100mm
$NZ16.20TengTools Screwdriver – Robertson (Square Type)
For internal square holes as per Robertson type. Round shaft of TT-MV PLUS steel. Phosphated black tip. Ergonomically designed two component handle with hanging hole.
• For Square Recessed Heads: No. 1
• For Screw: M6
• Max Head Width: 2.31mm
• Blade Length: 100mm
• Handle Length: 116mm
-
Teng MD TT-MV+ Screwdriver ROB#2 x 100mm
$NZ16.50TengTools Screwdriver – Robertson (Square Type)
For internal square holes as per Robertson type. Round shaft of TT-MV PLUS steel. Phosphated black tip. Ergonomically designed two component handle with hanging hole.
• For Square Recessed Heads: No. 2
• For Screw: M8
• Max Head Width: 2.74mm
• Blade Length: 100mm
• Handle Length: 116mm
-
Teng MD TT-MV+ Screwdriver ROB#3 x 100mm
$NZ14.30TengTools Screwdriver – Robertson (Square Type)
For internal square holes as per Robertson type. Round shaft of TT-MV PLUS steel. Phosphated black tip. Ergonomically designed two component handle with hanging hole.
• For Square Recessed Heads: No. 3
• For Screw: M10
• Max Head Width: 3.27mm
• Blade Length: 100mm
• Handle Length: 116mm
-
Teng Ratchet Extendable 1/2 inch Drive 45 teeth
Original price was: $NZ152.20.$NZ129.00Current price is: $NZ129.00.• With an extendable ratchet the user has several lengths to choose from without going back to the tool box for another tool saving space in their storage.
• The extendable handle can be adjusted in five fixed steps where the extended length gives better reach in confined spaces and increased leverage on stubborn bolts and nuts when needed. • Made from chrome vanadium steel, equipped with a twist reverse for quick and easy change of direction. Quick release function makes it easy to change between different sockets and accessories and a ball lock secures the grip of the socket.
• Extendable handle in 5 steps, 356–508mm
• 45 teeth | 8° Increments
-
Teng T1221 21pc 1/2in Dr. Metric Reg. Socket Set 12Pnt
$NZ185.00T1221 – 21pc 1/2in Drive Metric Socket Set (12pnt) 21 piece 1/2in drive socket set covering 10-32mm with regular 12-point sockets, the TengTools ‘FRP’ ratchet and socket accessories. Supplied in hard wearing storage case with retractable handle, metal pin hinges & rubber feet. Set Contents: • Socket sizes (12pnt): 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24, 27, 30 & 32mm • Universal Joint • Extension bars: 2-1/2in (60mm) & 6in (150mm) • T-Bar Adaptor: 3/8F:1/2M Case size (L x W x H): 369 x 198 x 62mm Net Weight: 3.1kg
-
Teng T1268 68pc 1/2in Dr. Metric Socket & Tool Set 12Pnt
$NZ499.00T1268 – 1/2in Drive Metric Socket & Tool Set 68 piece 1/2in drive tool set, containing 16 regular 12 point metric sockets, FRP ratchet, universal joint, 2-1/2in and 6in extension bars, adaptor 3/8F:1/2M, bits holder with magnetic bits holder, 10 combination spanners, 6 screwdrivers, 4 pliers as well as 26 bits. Supplied in a plastic carrying case with latch lid, retractable handle and metal pin hinges. The underside of the case is fitted with rubber feet to prevent it from sliding.
-
Teng TM095 95pc 1/4 & 1/2in Dr. Metric Socket & Tool Set
95 piece 1/4in & 1/2in drive socket set containing regular and deep 1/4in drive metric sockets, 1/2in drive regular 6 point sockets (4-32mm), FRP ratchets, universal joints, extension bars, 1/2in drive spark plug socket plus other socket accessories and screwdriver bits. The set also includes combination spanners (8, 10, 12, 13, 14 & 17mm), screwdrivers and an array of 1/4in hex screwdriver bits with drive. Supplied in a plastic carrying case with latch lid, retractable handle and metal pin hinges. The underside of the case is fitted with rubber feet to prevent it from sliding.
-
Teng TT1435 35pc 1/4in Dr. Skt & Acc Set 4-13mm – TC-Tray
$NZ186.90• Set containing 11 short 6-point sockets, 6 deep 6-point sockets, 11 screwdriver bits, ratchet handle, universal joint, 2 extension bars, 1/4″ bit socket, adaptor drive 3/8″-1/4″ and 1/4″ screwdriver handle. • Supplied in a plastic TC tray with removable lid. • Fits in Teng Tools tool boxes and roller cabinets.
-
Teng TT3819 19pc 3/8in Dr. Skt & Acc Set 8-22mm – TC-Tray
Original price was: $NZ216.50.$NZ149.00Current price is: $NZ149.00.• Set containing 13 sockets 6-point, ratchet handle, universal joint, extension bar 75mm, screwdriver handle 250mm long with 3/8″ square-drive at both ends, adaptor drive 1/2″-3/8″ and 1/4″ bit socket.
• Supplied in a plastic TC tray with removable cover.
• The case fits in Teng Tools tool boxes and roller cabinets.
-
Teng TT440 4pc MB Vinyl Grip Plier Set – TC-Tray
Original price was: $NZ214.80.$NZ139.00Current price is: $NZ139.00.• Set of 4 pliers, water pump pliers, combination pliers, side cutters and long nose pliers.
• Made of chrome molybdenum steel. With VINYL GRIP handles.
• Supplied in a plastic TC tray with removable lid.
• Fits in Teng Tools tool boxes and roller cabinets.
-
Teng TT440-T 4pc MB TPR Grip Plier Set – TC-Tray
Original price was: $NZ232.60.$NZ149.00Current price is: $NZ149.00.• Set of 4 pliers, water pump pliers, combination pliers, side cutters and long nose pliers.
• Made of chrome molybdenum steel. With ergonomically designed two component TPR GRIP handles.
• Supplied in a plastic TC tray with removable lid.
• Fits in Teng Tools tool boxes and roller cabinets.
-
Teng TT917N 7pc MD Screwdriver Set – TC-Tray Teng 7pc MD Screwdriver Set – TC-Tray
$NZ117.60• Set of 7 screwdrivers including flat as well as Phillips and Pozidriv tips.
• With shaft of TT-MV PLUS steel.
• Ergonomically designed two component handles with hanging hole.
• Supplied in a plastic TC tray with removable lid.
• Fits in Teng Tools tool boxes and roller cabinets.
-
Teng TTMD74 74pc MD Ratchet S/Driver Bits Set – TC-Tray
Original price was: $NZ139.50.$NZ95.00Current price is: $NZ95.00.• Consists of a ratcheting bit driver, 6″ flexible extension, 4″ extension bar, external square 1/4″Mx1/4″ hexagonal external adaptor, internal square 1/4F”x1/4F” hexagonal internal adaptor and 69 bits.
• Supplied in a plastic TC tray with removable lid.
• Fits in Teng Tools tool boxes and roller cabinets.
-
Teng TTTX7 7pc T-Handle TX/TPX Set 10-40 – TC-Tray
Original price was: $NZ100.10.$NZ89.00Current price is: $NZ89.00.TX/TPX -Spanners in Set Teng Tools TTTX7 TC-Tray™ Modular System – GET ORGANISED WITH TENG!
Tray Size: 265 x 142 x 50mm Tray Weight: 0.7kg
• TX/TPX-keys with T-handle. TX/TPX: 10, 15, 20, 25, 27, 30, 40
• For internal TX/TPX heads (long key ends also for tamper proof screws).
• Supplied in a plastic TC tray with removable lid.
• Fits in Teng Tools tool boxes and roller cabinets.
-
Teng TV18N 18pc 1000V VDE Plier & Screwdriver Set
$NZ449.00TV18N | Teng 18pc 1000V VDE Plier & Screwdriver Set
• Approved for live working up to 1,000 volts
• Screwdrivers with Integrated protective insulation with two colours to clearly indicate if there is any damage to the insulation
• TPR grip on the pliers and bi-material handles on the screwdrivers for a more secure and comfortable grip
• Hard wearing case with tools laid out to easily identify where tools belong
• Secure lock system to ensure that the lid is closed correctly
• Designed and manufactured to IEC 60900
• Case Size: 466 x 258 x 103mm
• Net Weight: 4.7kg
-
TOLEDO 30012 – STAINLESS STEEL RULE DOUBLE SIDED METRIC & IMPERIAL – 300MM
Original price was: $NZ26.20.$NZ20.00Current price is: $NZ20.00.Description – Short Stainless steel double sided rule with metric on front and imperial on back
Graduations on both upper and lower edges with numerical markings in centre
One square end and one rounded end with hanging hole
Length: 300mm
Width: 28mm
Made in Japan -
TOLEDO 301065 – THREAD FILE – METRIC
Original price was: $NZ70.90.$NZ55.00Current price is: $NZ55.00.- Designed to restore damaged, worn or corroded threads
- Suitable for left and right handed threads of almost any diameter
- Features 8 internal thread repairers (thread identifiers) and 8 external thread files
- Manufactured from heat treated plated steel
- Overall length: 230mm
- Thread type: Metric
- Thread pitch range: 0.80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00 (mm)
-
TOLEDO 301066 – THREAD FILE – SAE
Original price was: $NZ70.90.$NZ55.00Current price is: $NZ55.00.- Designed to restore damaged, worn or corroded threads
- Suitable for left and right handed threads of almost any diameter
- Features 8 internal thread repairers (thread identifiers) and 8 external thread files
- Manufactured from heat treated plated steel
- Overall length: 230mm
- Thread type: SAE
- Thread pitch range: 10, 11, 12, 14, 16, 18, 20, 24 (TPI)
-
TOLEDO 301070 – JUMBO PRY BAR – 800MM
Original price was: $NZ99.30.$NZ79.00Current price is: $NZ79.00.- Features square shanked shaft with flat blade end and plastic grip handle with impact head
- Suitable for automotive, industrial and hardware applications
- Manufactured from high quality alloy steel for strength and durability
- Bar thickness: 13.5mm
- Overall length: 800mm
-
TOLEDO 301080 – Dead Blow Hammer – 20oz (0.6kg)
$NZ50.40- Featuring hollowed cylindrical heads containing steel pellets offering a dead blow and significant impact with the rise and fall of the hammer
- Non sparking and marring
- Shockless and non-bound
- Manufactured from nitrile chemical resistance rubber material with a moulded handle for superior comfort and grip
- Face diameter: 45mm
- Face length: 90mm
- Overall length: 300mm
- Weight: 20oz (0.6kg)
-
TOLEDO 301083 – PRY BAR SET – STANDARD 4 PC.
Original price was: $NZ62.90.$NZ49.00Current price is: $NZ49.00.- Features square shanked bars with angled heads and plastic grip handles
- Suitable for automotive, industrial and hardware applications
- Manufactured from high quality alloy steel with industrial black finish for strength and durability
-
TOLEDO 301097 – TORQUE WRENCH – 1/4″ SQ. DR. 2-24NM/17-212IN. LBS
Original price was: $NZ123.70.$NZ99.00Current price is: $NZ99.00.Click-stop design with heavy duty cam for superior strength and durability
Micrometer style adjuster enables precise torque setting
Reversable thumb switch with 24 tooth ratchet head
Supplied with calibration certificate and storage case
1/4″ Sq. Dr.
Dual Scale: 2 – 24Nm/17 – 212In. Lbs. -
TOLEDO 301098 – TORQUE WRENCH – 3/8″ SQ. DR. 7-108NM/5-80FT. LBS
Original price was: $NZ118.70.$NZ99.00Current price is: $NZ99.00.Click-stop design with heavy duty cam for superior strength and durability
Micrometer style adjuster enables precise torque setting
Reversable thumb switch with 24 tooth ratchet head
Supplied with calibration certificate and storage case
3/8″ Sq. Dr.
Dual Scale: 7 – 108Nm/5 – 80Ft. Lbs. -
TOLEDO 301099 – TORQUE WRENCH – 1/2″ SQ. DR. 14-203NM/10-150FT. LBS
Original price was: $NZ119.50.$NZ99.00Current price is: $NZ99.00.Click-stop design with heavy duty cam for superior strength and durability
Micrometer style adjuster enables precise torque setting
Reversible thumb switch with 24 tooth ratchet head
Supplied with calibration certificate and storage case
1/2″Sq, Dr.
Dual scale: 14 – 203Nm/10 – 150Ft. Lbs. -
TOLEDO 301176 – Universal Joint Socket Set (3/8” Sq. Dr.) Torx T20-T50 10 Pc.
Original price was: $NZ227.40.$NZ179.00Current price is: $NZ179.00.- Universal joint sockets for use on Torx fasteners used in modern automotive applications
- Socket set features 3/8” square drive with universal joint design, extension bar, sliding T-Handle and ratchet adaptor
- Manufactured from drop forged vanadium steel for maximum strength and longevity
- 10 piece sets supplied in blow mould storage case
-
TOLEDO 301186 – PRY BAR – ADJUSTABLE
Original price was: $NZ121.30.$NZ109.00Current price is: $NZ109.00.Features heavy duty pry bar and podger design with adjustable locking pry bar shaft
Tapered podger end ideal for alignment of bolt holes
Suitable for automotive, industrial and hardware applications
Solid steel construction
Length: 540–810mm -
TOLEDO 301800 – CIRCLIP PLIER SET – HEAVY DUTY 270MM 18 PC
Original price was: $NZ149.20.$NZ105.00Current price is: $NZ105.00.ITEM CONTENTS
Code Name Qty 301801 Straight Tip – 2.8m 1 301802 15° Tip – 2.8mm 1 301803 45° Tip – 2.8mm 1 301804 90° Tip – 2.8mm 1 301805 Straight Tip – 3.0mm 1 301806 15° Tip – 3.0mm 1 301807 45° Tip – 3.0mm 1 301808 90° Tip – 3.0mm 1 -
TOLEDO 301822 – BREAKER BAR STANDARD HEAD – 3/4″ SQ. DR. 1000MM EXTRA HD
Original price was: $NZ157.50.$NZ119.00Current price is: $NZ119.00.- Manufactured from heat treated drop forged chrome vanadium steel with corrosion resistant mirror-chrome finish
- Square drive design with 180° rotating head for increased versatility
- This breaker bar features an extra heavy duty design with a much thicker neck and robust bar compared to normal breaker bars
-
TOLEDO 301956 – STAINLESS STEEL SINGLE SIDED EASY PICK-UP RULE METRIC – 150MM
Original price was: $NZ12.60.$NZ10.00Current price is: $NZ10.00.- Graduations on both upper and lower edges with numerical markings in centre only
- Easy pick-up rules feature a bent edge at one end to enable user to easily pick-up the rule from flat surfaces
- One square end and one round end with hanging hole
- Manufactured from stainless steel
- Length: 150mm
- Width: 15mm
- Thickness: 1.0mm
- Graduation upper: 1mm
- Graduation lower: 0.5mm
-
TOLEDO 302014 – CIRCUIT TESTER – COMPUTER SAFE LED 3-12 VOLT
Original price was: $NZ39.40.$NZ35.00Current price is: $NZ35.00.- Professional quality LED computer safe testing tool
- Suitable for testing injector pulse, automotive computer circuits and all primary automotive electrical circuits
- High impact transparent acetate handle, stainless steel probe, LED polarity indicator, long lead and crocodile clip
- Handle illuminates red when circuit is active in positive polarity and green when in negative polarity
- Ideal for use on circuits where sensitive testing is required
- High impedance protects computer
- Voltage Range: 3-12V
- Lead Length: 1200mm
- Probe Length: 75mm
-
TOLEDO 302141 – CIRCLIP TOOL KIT – HEAVY DUTY
Original price was: $NZ205.00.$NZ135.00Current price is: $NZ135.00.Compound scissor action allows for use on large circlips
Suitable for internal and external applications
Working capacity: 45 – 180mm (circlip diameter)
Overall Length: 300mm
Circlip tip sizes: 2.1mm, 2.8mm, 3.8mm & 4.1mm -
TOLEDO 302191 – CIRCUIT TESTER – DIGITAL LCD 6-24 VOLT
Original price was: $NZ117.90.$NZ99.00Current price is: $NZ99.00.- Professional trade quality circuit testing tool with unique digital LCD display that provides an accurate voltage value of the circuit
- LED indication lights illuminate green for ground and red for power
- Heavy duty flexible spring cord extends from 700-3000mm
- Voltage range: 6-24V (DC)
- Resolution: 0.1V (DC)
- Accuracy: ± (1%)
- Overall length: 210mm
- Probe length: 90mm
-
TOLEDO 316002 – BOLT CUTTER – 450MM (18″)
Original price was: $NZ98.90.$NZ79.00Current price is: $NZ79.00.Suitable for general purpose use with soft and medium metal applications only
Slim head centre cut jaw design enables close surface cutting
Ideal for mining, industrial and hardware applications
Manufactured from chrome molybdenum steel jaws
Length: 450mm (18”) -
TOLEDO 321043 – STRIKE THRU PRY BAR 900MM
- Strike-Thru capabilities without causing handle damage
- Ergonomic, dual composite plastic with rubber inter-moulded handles designed for maximum comfort and grip
- Ideal for all automotive and heavy vehicle prying work
- Complete tool is hardened and tempered to withstand the demands of every day heavy use
- Overall length: 900mm
-
TOLEDO 321046 – PRECISION HAMMER SET – MINI MULTI-HEAD 8 OZ
Original price was: $NZ102.30.$NZ75.00Current price is: $NZ75.00.Precision hammer set with six interchangeable screw on heads – brass (round & flat) stainless steel, aluminium, rubber and polyurethane
Ideal for delicate interior and exterior applications
Handy wedge handle is suitable for use as a trim remover -
TOLEDO 321052 – Ball Pein Hammer Carbon Fibre Handle – 24oz
$NZ61.80- Made from durable alloy steel construction with a carbon fibre core
- Carbon fibre core increases bending when striking by more than 25% over a conventional fibreglass type
- The unique ergonomically design handle prevents the hammer from slipping out of the users hand while striking
- Dual composite moulded rubber handle
- Perfect hammer for a multitude of striking applications
- Weight: 24oz
-
TOLEDO 321053 – Ball Pein Hammer Carbon Fibre Handle – 32oz
$NZ66.70- Made from durable alloy steel construction with a carbon fibre core
- Carbon fibre core increases bending when striking by more than 25% over a conventional fibreglass type
- The unique ergonomically design handle prevents the hammer from slipping out of the users hand while striking
- Dual composite moulded rubber handle
- Perfect hammer for a multitude of striking applications
- Weight: 32oz
-
TOLEDO 321055 – Curved Claw Hammer – 20oz
Original price was: $NZ57.60.$NZ39.00Current price is: $NZ39.00.- Made from durable alloy steel construction with a carbon fibre core
- Carbon fibre core increase bending when striking by more than 25% over a conventional fibreglass type
- The unique ergonomically design handle prevents the hammer from slipping out of the users hand while striking
- Dual composite moulded rubber handle
- Ideal hammer for all construction and building work
-
TOLEDO 321056 – CLUB HAMMER – 3LB
Original price was: $NZ75.70.$NZ65.00Current price is: $NZ65.00.- Made from carbon steel with a fibreglass and rubber handle
- The durable hardened carbon steel head is ideal for repeated high impact striking applications
- Small compact size is ideal for use with steel chisels, demolition and construction work
-
TOLEDO 322013 – MINI MAGNETIC LEVEL – 100MM
$NZ20.00- Small, lightweight and durable magnetic level perfect for a wide range of applications
- Shockproof solid acrylic vial provides a quick and accurate reading
- Lightweight aluminium box profile fits easily into any tool belt or pocket
- Rubber shockproof end caps
- Rare earth magnets
- Accuracy: 0.5mm/m
- Length: 20mm
- Width: 100mm
- Thickness: 7mm
-
TOLEDO 322015 – RAFTER SQUARE – ERGOCAST PLASTIC 7″
$NZ34.60- Ideal for marking and cutting of rafters, stairs or any basic angle
- Tri-square, miter square, protractor, line scriber and saw guide all in one tool
- Moulded-in conversion tables that never fade or rub off
- Marked with degree graduations for fast, easy layout
- Square body has a flat base on one side for easy 90 degree vertical measuring
- Commonly used in carpentry applications
-
TOLEDO ADJUSTABLE COMBINATION SQUARE METRIC & IMPERIAL – 300MM
$NZ26.80Suitable for use as inner or outside try square, mitre square, horizontal, 45° and plumb level, depth and marking gauge and rule
Detachable ruled blade
Spirit level for checking level and plumb
Lidded scriber for marking work
Manufactured from stainless steel
Length: 300mm/12 inch -
TOLEDO COMBINATION SQUARE SET 300MM
Original price was: $NZ146.80.$NZ109.00Current price is: $NZ109.00.- Versatile and useful multi-application set for a wide range of measuring and lay out jobs
- Suitable for use as a rule, spirit level, plumb level, 45° level, try square (internal and external), height/depth gauge, marking gauge and scriber
- Supplied in high grade EVA foam storage tray
- Common applications include jobs in woodworking, metal working and stonemasonry
- Black baked enamel finish (except rule)
-
TOLEDO CRIMPER, CUTTER & STRIPPER – HEAVY DUTY
Original price was: $NZ63.70.$NZ59.00Current price is: $NZ59.00.Heavy duty multi-application tool for crimping, cutting and stripping
Suitable for insulated and non-insulated terminals
Plastic handles with rubber intermoulds for maximum comfort and grip
Manufactured from quality alloy steel with black oxide finish for increased service life
Overall length: 205mm -
TOLEDO LOCK-GRIP PLIERS – SHEET METAL 250MM
$NZ47.50- Adjusting screw and self locking with release lever
- Powerful jaws grip firmly across front edge
- Applications include bending, forming, clamping and crimping sheet metal
- Manufactured from chrome molybdenum with nickel plating
- Overall length: 250mm
- Jaw width: 100mm
- Jaw opening: 0-55mm
-
TOLEDO MAGNETIC TORPEDO LEVEL – 250MM
Original price was: $NZ62.40.$NZ55.00Current price is: $NZ55.00.Handy magnetic level suitable for minor and major tasks
Features horizontal and vertical shockproof acrylic vials
Precision milled flat surface with an accuracy of <0.5mm/m (0.0005 in/in)
Overall length: 250mm -
TOLEDO POCKET CUTTER 200MM
Original price was: $NZ41.00.$NZ35.00Current price is: $NZ35.00.Suitable for general purpose use with mild and hard metal applications
Slim head centre cut jaw design enables close surface cutting
Manufactured from metal construction with hardened and tempered jaws for superior strength and durability
Overall Length: 200mm (8″)
Cut type: Centre -
TOLEDO PROTRACTOR 180° 100MM
Original price was: $NZ59.70.$NZ55.00Current price is: $NZ55.00.- For accurate angle, depth and length measurements
- 180° along with 100mm rule
- Photographically etched markings for ultimate precision and accuracy
- Deep etched with black chrome plating for long term visibility and service life
- Stainless steel with matt finish which is non-glare and easy to read
-
TOLEDO ROLLED HEAD PRY BAR SET – ADJUSTABLE 3 PC.
Original price was: $NZ278.50.$NZ199.00Current price is: $NZ199.00.- High leverage design with smooth curved head
- Adjustable head 180° permits prying and lifting in confined area
- Push lock function for ease of use
- Ergonomic knurled handle for secure grip
- Manufactured from high strength chrome vanadium steel with black phosphate finish to resist corrosion
- Suitable for automotive and industrial applications
- Lengths: 200mm, 250mm & 330mm
- Supplied in custom blow moulded plastic hard case
-
TOLEDO SSA6 – Engineering Square – Non-Graduated 150mm
$NZ54.60- Used for producing right angles in carpentry and engineering applications
- Internal & External Squareness as per BS 939 Grade B
- An excellent range of precision steel squares that are second to none
- Hardened spring steel blades are permanently fixed to the stock by means of tapered self locking rivets which ensure complete rigidity
- Both the blade and stock are precisely ground to ensure straightness and parallelism
- Working edges of the blades are lapped which further enhances accuracy
- A groove on the inner corner of the stock aids in the clearance of burr or dirt
- Type: Non-graduated
- Blade length: 150mm
-
TOLEDO STAINLESS STEEL DOUBLE SIDED RULE METRIC – 150MM
$NZ14.00- Numerical markings on front side in centre counting from left to right
- Numerical markings on reverse side in centre beginning in middle and counting outwards to each end
- Graduations on both upper and lower edge
- One square end and one round end with hanging hole
- Manufactured from stainless steel
- Manufactured from stainless steel
- Length: 150mm
- Width: 20mm
- Thickness: 1.0mm
- Graduation upper edge: 1mm
- Graduation lower edge: 0.5mm
-
TOLEDO STAINLESS STEEL RULE DOUBLE SIDED METRIC & IMPERIAL – 300MM
$NZ26.20- Double sided with graduations on both upper and lower edges
- Metric Front – numerical markings every 10mm in centre only
- English Back – numerical markings every 1 inch in centre only
- One square end and one rounded end with hanging hole
- Manufactured from stainless steel
- Length: 300mm
- Width: 28mm
- Thickness: 1.0mm
- Graduation front upper: 0.5mm
- Graduation front lower: 1mm
- Graduation back upper: 0-2inch: 20ths of one inch, 2-3inch: 50ths of one inch, 3-6inch: 10ths of one inch
- Graduation back lower: 0-2inch: 32nds of one inch, 2-3inch: 64ths of one inch, 3-6inch: 16ths of one inch
-
TOLEDO STAINLESS STEEL SINGLE SIDED RULE METRIC – 150MM
$NZ12.60- Graduations on both upper and lower edges with numerical markings in centre only
- One square end and one round end with hanging hole
- Manufactured from stainless steel
- Length: 150mm
- Width: 15mm
- Thickness: 0.5mm
- Graduation upper edge: 1mm
- Graduation lower edge: 0.5mm
-
TOLEDO STAINLESS STEEL SINGLE SIDED RULE METRIC – 300MM
$NZ24.40- Graduations on both upper and lower edges with numerical markings in centre only
- One square end and one round end with hanging hole
- Manufactured from stainless steel
- Length: 300mm
- Width: 25mm
- Thickness: 1mm
- Graduation upper edge: 1mm
- Graduation lower edge: 0.5mm
-
TOPTUL DIGITAL MULTIMETER
Original price was: $NZ125.80.$NZ99.00Current price is: $NZ99.00.
Digital multimeter with basic measuring functions
Test lead set with test tip (red/black)
Central dial switch
Large LCD with 3-1/2 digit display 2000 counts
Low battery indicator and auto shut off (after 15 minutes)
Additional Features: Data hold, auto range, auto power off selection, auto power off cancelationFeature:
AC and DC voltage measurement
AC and DC current measurement
Resistance measurement
Diode test
Continuity test with buzzer
Transistor test (NPN & PNP)
LED test
ITEM NO: GNBA0501
