HANDTOOLS
- You cannot add that amount to the cart — we have 1 in stock and you already have 1 in your cart. View cart
-
STANLEY® Heavy-duty Hammer Tacker
Original price was: $NZ132.30.$NZ119.00Current price is: $NZ119.00.- HEAVY-DUTY: Designed to withstand thick, rugged materials and suitable for applications such as carpeting, insulation, felting and plastic wrapping
- STEEL HOUSING: For added durability and prolonged usability
- FITS 2 STICKS OF STAPLES: To reduce re-load times
-
STANLEY® Heavy-duty Riveter
Original price was: $NZ71.40.$NZ59.00Current price is: $NZ59.00.- BUILT IN NOSE PIECE AND WRENCH STORAGE: 4 interchangeable nose pieces and wrench stored in the handle for easy access and transportation
- STEEL AND ALUMINIUM RIVET COMPATIBLE: For wide range of applications
- LONG HANDLES: Make the riveter easier to squeeze
-
STANLEY® Sharpening System Kit 3 Piece Set (Guide, Oilstone, Oil)
Original price was: $NZ43.00.$NZ39.00Current price is: $NZ39.00.- STANLEY® Sharpening Kit is a must in order to maintain your chisels for superior longevity
- Angle setting gauge with preset markings – 25°, 30° or 35°
- Contains Honing Guide, oilstone and white oil
-
STANLEY® STHT0-77364 Multi-Meter
Original price was: $NZ60.00.$NZ50.00Current price is: $NZ50.00.- STANDARDS: 7 functions and 20 ranges, rated for Category 3 standards CAT III
- EASY TO READ: Easy to read LCD screen with large numbers
- COMFORTABLE AND ERGONOMIC DESIGN: With a rugged over molded housing adds to shock resistance
-
STANLEY® Tylon™ Tape Measure (8m)
Original price was: $NZ22.60.$NZ19.00Current price is: $NZ19.00.- Centralised numbers for blade markings that allow for easy identifications of measurement and greater accuracy
- Compact case design is ergonomically shaped
- Soft shock-resistant case withstands shocks and knocks offering greater blade protection
-
STANWAY 180mm Aluminium Rafter Square
Original price was: $NZ37.80.$NZ35.00Current price is: $NZ35.00.This trade quality 180mm Stanway Aluminium Rafter Square is precision designed and made from aluminium to ensure strength, durability, and long life. CNC machined edges for guaranteed accuracy. This rafter square has a anodized matte black protective finish with easy-to-read laser etched bold white markings. This square uses metric millimetre markings/measurements. A common rafter conversion table is included on rafter square which has been laser etched on one side. Suitable for all trades people and the serious DIY users.
-
STANWAY 225mm PVC Pipe Saw
Original price was: $NZ47.10.$NZ39.00Current price is: $NZ39.00.Features:
- For cutting PVC, PE, PP, Wood, MDF board, Trees etc.
- Ergonomic handle for comfort and grip.
- Fine cut teeth for accurate cutting.
- Reversible handle.
- Rotating tightening screw locks in blade firmly.
- Comes supplied with a 17tpi 225mm blade.
- Two replaceable blades are available.
Specifications:
- Overall Length: 381mm
- Blade Length: 262mm
- Blade Width: 34mm
- Cutting Edge: 225mm
- TPI: 17
-
STANWAY 250mm Flat Bastard Cut File
$NZ28.80Flat file type with bastard cut used for general purpose deburring, sharpening and shaping. For use on iron and steel. Double cut on sides and Single cut on edges.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 24mm
- Blade Depth: 5.5mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 250mm Half Round Bastard Cut File
$NZ39.70Used for flat, convex and concave surfaces. Double cut used with slightly heavier pressure that removes material faster. Bastard cut for general purpose deburring, sharpening and shaping.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 24mm
- Blade Depth: 7mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 250mm Half Round Wood Rasp File
$NZ40.80Half round in shape for flat, convex and concave surfaces. Used on materials such as wood and soft metals. Has a much coarser rasp-type surface, for rapid removal and shaping.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 24.5mm
- Blade Depth: 7mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 250mm Mill Bastard File One Round Edge
$NZ33.10Used for sharpening mill or circular saws. Has one round edge used for rounding gullets. Single cut used with light pressure for more precision. Has a bastard coarseness; teeth spaced apart.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 24mm
- Blade Depth: 4.5mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 250mm Round Bastard File
$NZ25.20Round in cross-section, primarily used for enlarging holes, and scalloping concave surfaces. Bastard cut for general purpose deburring, sharpening and shaping.
Specifications:
- Overall Length: 365mm
- Blade Length: 250mm
- Blade Width: 9mm
- Blade Depth: 9mm
- Handle Length: 115mm
- Handle Width: 30mm
- Handle Depth: 25mm
-
STANWAY 300mm Aluminium Rafter Square
Original price was: $NZ62.80.$NZ55.00Current price is: $NZ55.00.This trade quality 300mm Stanway Aluminium Rafter Square is precision designed and made from aluminium to ensure strength, durability, and long life. CNC machined edges for guaranteed accuracy. This rafter square has a anodized matte black protective finish with easy-to-read laser etched bold white markings. This square uses metric millimetre markings/measurements. A common rafter conversion table is included on rafter square which has been laser etched on one side. Suitable for all trades people and the serious DIY users.
-
STANWAY 300mm Heavy Duty Combination Square
Original price was: $NZ55.60.$NZ49.00Current price is: $NZ49.00.The Stanway Heavy Duty Combination Square is the perfect tool for your next woodworking, stonemasonry, or metalworking job! This square is designed for many uses such as an outside or inside try square, a mitre square or a depth and marking gauge. Very accurate, reliable, and easy to use. Features a ruler adjustment locking nut, a spirit level and a built-in scriber for surface marking. Durably etched, heavy-duty cast iron ruler is rust resistant and built to last. Blade is marked with metric 1mm graduations on each side of ruler. Suitable for all trades people and the serious DIY users.
-
STANWAY 30m Long Steel Tape
$NZ36.60The Stanway Long Steel Tape Measure is engineered with a heavy-duty, impact and shock resistant ABS casing with a protective rubber bumper and a yellow steel blade, protected with a nylon coating. This tape measure is ergonomically designed for high usability due to its strong grip and its 3:1 winding mechanism for faster blade retraction. This tape also features a reinforced hook with a rubberised plastic ring, 31: geared non-finger nipping winding handle, and a fixed hook and ring. Suitable for all trades people and the serious DIY users.
-
STANWAY White Folding Rule (1m x 18mm)
$NZ31.90The Stanway White Folding Rule is a versatile and durable tool crafted from hard-wearing ABS plastic. Its clever 4-fold compact design makes it incredibly convenient for storage, fitting easily into toolboxes or pockets when not in use. When unfolded, this rule extends to an impressive 1 meter in length, providing ample reach for various measuring tasks. The 18mm wide blade boasts a bevelled edge, ensuring precise marking on surfaces. Millimeter graduations further enhance its accuracy, making it indispensable for carpenters, craftsmen, and DIY enthusiasts alike. Whether you’re building furniture or tackling home improvement projects, the Stanway White Folding Rule is the ideal companion for accurate and efficient measurements.
-
STARRETT 505A-12 300mm (12″) Aluminium Mitre Protractor
Original price was: $NZ230.80.$NZ199.00Current price is: $NZ199.00.The popular Pro-Site™ 505 protractor family consists of two 300mm (12″) combination protractors, a 300mm (12″) mitre protractor and two 175mm (7″) mitre protractors. The combination protractors take the guesswork out of these functions: mitre cuts, single cuts, compound mitre cuts, included conversion table, protractor and roof pitches. The mitre protractors are ideal for carpenters, plumbers and all building trades that require the measuring and transferring of angles.
-
STARRETT 505P-7 175mm (7″) Plastic Mitre Protractor
Original price was: $NZ65.20.$NZ55.00Current price is: $NZ55.00.The 175mm (7″) Plastic Mitre Protractor takes error-prone calculations out of the process of mitre cuts. This tool is ideal for carpenters, plumbers and all building trades that require the measuring and transferring of angles, plus is invaluable for home use. This hardened plastic mitre protractor offers all the same functionality as the 505A-7 aluminium protractor.
-
Sterling Ultimax Tape Measure 8M x 25mm Metric
Original price was: $NZ29.70.$NZ25.00Current price is: $NZ25.00.Sterling Ultimax Tape Measure 8m x 25mm Metric
Premium rubber grip
Double sided blade printing
High impact resistant ABS casing with non-slip grip
Reinforced 4 rivet dual-hook
25mm wide blade for super standout
Superior internal mechanism for smooth operation
Layered nylon blade for maximum durability
-
STILETTO FB11G 11-1/2″ Titanium Glazer Bar
$NZ234.10The STILETTO® 11-1/2″ Titanium Glazer Bar is strong and lightweight. It is recommended for setting windows and doors, moderate prying, and scraping. This Glazer Bar features a 180° side nail puller that allows you to pull 6D-16D nails with ease.
- 8.5oz Solid Titanium Bar with Strong Arch Design
- Staple Puller Grabs 3/16″ Pre-Hung Door Staples Easily
- Two “Multi-Fulcrum” Nail Pullers Designed to Increase Leverage
- Built-In Bottle Opener
-
STILETTO FH10C 10oz Smooth/Curved Hickory Hammer
$NZ252.00The STILETTO® 10oz Titanium Hickory Finish Hammer with Smooth Face and 14.5″ Curved Handle is made with shock-absorbing USA Hickory. This 10oz titanium hammer hits like a 16oz steel hammer with 45% less weight and 10x less recoil shock. It is recommended for finish carpentry, remodeling, and light framing. The Titanium Hickory Finish Hammer includes a magnetic nail starter and replaceable handle.
- 10oz Titanium Head Hits Like a 16oz Steel Head
- Replaceable USA Made Hickory Handle
- Magnetic Nail Starter
- Straight Claw Design
-
STILETTO TB3SC TIBONE™ III Smooth/Curve Titanium
$NZ569.50The STILETTO® 15oz TIBONE™ III Hammer with Smooth Steel Face and 18″ Curved Handle is our most powerful and most durable hammer. This 15oz full titanium hammer hits like a 28oz steel hammer, with 45% less weight and 10x less recoil shock. It is recommended for rough framing, remodeling, and pole barn construction. The TIBONE™ III features a 180° side nail puller that allows you to pull 6D-16D nails with ease and includes a magnetic nail starter.
-
STILETTO TBM14RSC TIBONE™ Mini Smooth/Curve Titanium
The STILETTO® 14oz TIBONE™ MINI Hammer with Smooth Steel Face and 16″ Curved Handle is our smaller, lighter all titanium framing hammer. This 14oz full titanium hammer hits like a 24oz steel hammer, with 45% less weight and 10x less recoil shock. It is recommended for rough framing, remodeling, and pole barn construction. The TIBONE™ MINI features a 180° side nail puller that allows you to pull 6D-16D nails with ease and includes a magnetic nail starter.
-
STILETTO TBRG-G Green Replacement Grip
Original price was: $NZ54.60.$NZ49.00Current price is: $NZ49.00.The STILETTO® Green Replacement Grip extends the life of your hammer while providing a personal touch. It is easy to install and remove on the jobsite with minimal tools. The STILETTO® Replacement Grip is available in 5 colors and includes a Black Oxide T25 Bolt, Nylon Locking Nut, and External Tooth Lock Washer.
-
STILETTO TBRG-O Orange Replacement Grip
Original price was: $NZ54.60.$NZ49.00Current price is: $NZ49.00.The STILETTO® Orange Replacement Grip extends the life of your hammer while providing a personal touch. It is easy to install and remove on the jobsite with minimal tools. The STILETTO® Replacement Grip is available in 5 colors and includes a Black Oxide T25 Bolt, Nylon Locking Nut, and External Tooth Lock Washer.
-
STILETTO TBRG-P Hi-Vis Pink Replacement Grip
Original price was: $NZ54.60.$NZ49.00Current price is: $NZ49.00.The STILETTO® Hi-Vis Pink Replacement Grip extends the life of your hammer while providing a personal touch. It is easy to install and remove on the jobsite with minimal tools. The STILETTO® Replacement Grip is available in 5 colors and includes a Black Oxide T25 Bolt, Nylon Locking Nut, and External Tooth Lock Washer.
-
STILETTO TBRG-Y Hi-Vis Yellow Replacement Grip
Original price was: $NZ54.60.$NZ49.00Current price is: $NZ49.00.The STILETTO® Hi-Vis Yellow Replacement Grip extends the life of your hammer while providing a personal touch. It is easy to install and remove on the jobsite with minimal tools. The STILETTO® Replacement Grip is available in 5 colors and includes a Black Oxide T25 Bolt, Nylon Locking Nut, and External Tooth Lock Washer.
-
STILETTO TI14SC 14oz Smooth/Curved Hickory
$NZ289.00The STILETTO® 14oz Titanium Hickory Hammer with Smooth Face and 18″ Curved Handle is made with shock-absorbing USA Hickory. This 14oz titanium hammer hits like a 24oz steel hammer with 45% less weight and 10x less recoil shock. It is recommended for rough framing and remodeling. The Titanium Hickory Hammer includes a magnetic nail starter and replaceable handle.
- 14oz Titanium Head Hits Like a 24oz Steel Head
- Replaceable USA Made Hickory Handle
- Magnetic Nail Starter
- Straight Claw Design
-
STILETTO TI16SC 16oz Smooth/Curved Hickory
Original price was: $NZ378.00.$NZ279.00Current price is: $NZ279.00.The STILETTO® 16oz Titanium Hickory Hammer with Smooth Face and 18″ Curved Handle is made with shock-absorbing USA Hickory. This 16oz titanium hammer hits like a 28oz steel hammer with 45% less weight and 10x less recoil shock. It is recommended for rough framing and remodeling. The Titanium Hickory Hammer includes a magnetic nail starter and replaceable handle.
- 16oz Titanium Head Hits Like a 28oz Steel Head
- Replaceable USA Made Hickory Handle
- Magnetic Nail Starter
- Straight Claw Design
-
STILETTO TIB14RSC 14oz TIBONE™ Smooth/Curved Titanium
$NZ649.00The STILETTO® 14oz TIBONE™ Hammer with Smooth Steel Face and Curved Handle is our most powerful and most durable hammer. This All-Titanium hammer is 45% less weight and hits like steel. The durable TIBONE™ design is best for framing and pulling nails. The 180° Side Nail Puller and Magnetic Nail Starter fit up to 16D and Duplex Nails. The TIBONE™ features a replaceable steel face and multiple grip colors, extending the life of the hammer and providing a personal touch.
-
STILETTO TIB15SC 15oz TIBONE™ Smooth/Curved Titanium
$NZ685.00The STILETTO® 15oz TIBONE™ Hammer with Smooth Steel Face and Curved Handle is our most powerful and most durable hammer. This All-Titanium hammer is 45% less weight and hits like steel. The durable TIBONE™ design is best for framing and pulling nails. The 180° Side Nail Puller and Magnetic Nail Starter fit up to 16D and Duplex Nails. The TIBONE™ features a replaceable steel face and multiple grip colors, extending the life of the hammer and providing a personal touch.
-
STILETTO TICLW-12 11-1/2″ Titanium Clawbar
$NZ196.20The STILETTO® 11-1/2″ Titanium Dimpler® Nail Puller includes the patented nail removal feature for pulling common nails easily. It is recommended for setting windows and doors, moderate prying, and scraping. This Clawbar features a 180° side nail puller that allows you to pull 6D-16D nails with ease.
- 8.5oz Solid Titanium Bar with Lightweight Open Truss Design
- Dimpler® Nail Removal Feature Makes a Round Impression Around the Nail Head to Allow Claws to Slip Easily Under the Nail Head, Reducing Damage to the Material
- Strike Plate Outlasts Steel Bars by 3X and Doesn’t Spall Crack or Mushroom like Steel Bars
- Two “Multi-Fulcrum” Nail Pullers Designed to Increase Leverage
-
STILETTO TRMB 10oz TRIMBONE™ Smooth/Curve Titanium
$NZ649.00The STILETTO® 10oz TRIMBONE™ Hammer with Smooth Steel Face and Curved Handle is designed for finish with specialized features. This titanium hammer is 45% less weight and hits like steel. The compact D-Face and Trim Claw are ideal for tight spaces. The TRIMBONE™ also features a steel face and a replaceable colored grip, available in 6 colors, extending the life of the hammer and providing a personal touch. The 180° side nail puller is ideal for 2D-10D nails but has the power to pull up to 16D.
-
STILETTO TRMB-RMA TRIMBONE™ Mallet Cap Kit
Original price was: $NZ67.20.$NZ59.00Current price is: $NZ59.00.The STILETTO® TRIMBONE™ Mallet Cap Kit replaces the need for most mallet applications. Easily alternate between hammer and mallet when in need of a light touch. The non-marring Mallet Cap comes in White (Hard Mallet) and Black (Soft Mallet).
- Non-Marring
- Quick Removal
- Available in White (Hard Mallet) and Black (Soft Mallet)
- Fits: TRIMBONE™ TRMB
-
SUTTON Centre Punch Set
$NZ35.70Sutton Tools Centre Punches are typically used as an aid to drilling operations. A drill will have a tendency to wander on the surface until it gains sufficient purchase to start cutting a hole.
All Sutton Tools punches are made from high quality chrome vanadium steel with a hardened and tempered point to withstand continuous use. An ergonomic soft rubber grip provides comfort and safety.
-
SUTTON NAIL PUNCH SET- 5PC
Original price was: $NZ41.10.$NZ35.00Current price is: $NZ35.00.Sutton Tools Nail Punches are a short steel rod, usually tapered; used to drive a nail or brad below, or flush with, a wood surface.
All Sutton Tools punches are made from high quality chrome vanadium steel with a hardened and tempered point to withstand continuous use. An ergonomic soft rubber grip provides comfort and safety.
INCLUDES SIZES: 2, 3, 4, 5, 6mm
-
SUTTON PIN PUNCH SET
$NZ37.80Sutton Tools Pin Punches are used as a driving tool, typically, as the name implies, to drive pins that are used to affix a fixture to a rotating shaft.
All Sutton Tools punches are made from high quality chrome vanadium steel with a hardened and tempered point to withstand continuous use. An ergonomic soft rubber grip provides comfort and safety.
-
SYKES-PICKAVANT 800101 – MOTORQ PROFESSIONAL TORQUE WRENCH 1/2”
Original price was: $NZ416.50.$NZ339.00Current price is: $NZ339.00.- Soft feel ergonomic handle that provides exceptional grip even in oily conditions
- Large easy to read dual scale for improved visibility, precise torque setting adjusts 40% faster
- Push/pull torque adjustment knob that allows for rapid and accurate torque settings
- Unique Timestrip® feature that provides a visual indication of when the torque wrench is due for re-calibration
- Features the renowned Sykes-Pickavant mechanism with push-thru ratchet head that has been engineered for strength and durability while operating in both clockwise and anti-clockwise directions
- All Sykes-Pickavant torque wrenches are manufactured in England to ISO9000:2000 standard and are supplied with a UKAS accredited calibration certificate in a protective case
-
SYKES-PICKAVANT 800200 – MOTORQ PROFESSIONAL TORQUE WRENCH 1/2”
Original price was: $NZ551.00.$NZ429.00Current price is: $NZ429.00.- Soft feel ergonomic handle that provides exceptional grip even in oily conditions
- Large easy to read dual scale for improved visibility, precise torque setting adjusts 40% faster
- Push/pull torque adjustment knob that allows for rapid and accurate torque settings
- Unique Timestrip® feature that provides a visual indication of when the torque wrench is due for re-calibration
- Features the renowned Sykes-Pickavant mechanism with push-thru ratchet head that has been engineered for strength and durability while operating in both clockwise and anti-clockwise directions
- All Sykes-Pickavant torque wrenches are manufactured in England to ISO9000:2000 standard and are supplied with a UKAS accredited calibration certificate in a protective case
-
SYKES-PICKAVANT 800300 – MOTORQ PROFESSIONAL TORQUE WRENCH 1/2”
Original price was: $NZ604.80.$NZ475.00Current price is: $NZ475.00.- Soft feel ergonomic handle that provides exceptional grip even in oily conditions
- Large easy to read dual scale for improved visibility, precise torque setting adjusts 40% faster
- Push/pull torque adjustment knob that allows for rapid and accurate torque settings
- Unique Timestrip® feature that provides a visual indication of when the torque wrench is due for re-calibration
- Features the renowned Sykes-Pickavant mechanism with push-thru ratchet head that has been engineered for strength and durability while operating in both clockwise and anti-clockwise directions
- All Sykes-Pickavant torque wrenches are manufactured in England to ISO9000:2000 standard and are supplied with a UKAS accredited calibration certificate in a protective case
-
Teng 1/2in Dr. 400mm Long Arm Ratchet 60T
Original price was: $NZ103.70.$NZ85.00Current price is: $NZ85.00.• 400mm long handle for added torque when needed
• 45 teeth giving 8 degree increments between clicks
• Twist reverse for quickly and easily changing between tightening and loosening
• Quick release for easier changing between different sockets and accessories
• Bi-material grip for extra comfort
-
Teng 1/2in Dr. FRP Ratchet 45T DIN3122D
$NZ112.601200FRP – 1/2in Drive FRP Ratchet
Teng Tools steel reinforced fibre ratchets have been designed to create a 45 teeth (8 degree increment) ratchet with quick release and flip reverse to meet or exceed all internationally recognised quality and torque specifications. The design protected ratchet (24583ROC) is not only lighter and just as strong but is also much more comfortable to use than regular ratchets. New style bi-material handles for a more comfortable grip.
Max Torque: 512Nm Length: 255mm Weight: 358gm
All Teng Tools ratchets should be cleaned and maintained on a regular basis to reduce wear and to prolong life. However, with all tools involving moving parts some wear will occur with time. Teng Tools offer a full range of complete service kits and spare parts for their ratchets – full details available from your local Teng Tools stockist.
-
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb
Original price was: $NZ228.70.$NZ195.00Current price is: $NZ195.00.Torque wrench manufactured to DIN3122 spec. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
-
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
Original price was: $NZ338.30.$NZ255.00Current price is: $NZ255.00.Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
-
Teng 1/4in Dr. FRP Ratchet 45T DIN3122D
$NZ80.901400FRP – 1/4in Drive FRP Ratchet Teng Tools steel reinforced fibre ratchets have been designed to create a 45 teeth (8 degree increment) ratchet with quick release and flip reverse to meet or exceed all internationally recognised quality and torque specifications. The design protected ratchet (24583ROC) is not only lighter and just as strong but is also much more comfortable to use than regular ratchets. Bi-material handles for a more comfortable grip.
Max Torque: 62Nm Length: 150mm Weight: 96gm
All Teng Tools ratchets should be cleaned and maintained on a regular basis to reduce wear and to prolong life. However, with all tools involving moving parts some wear will occur with time. Teng Tools offer a full range of complete service kits and spare parts for their ratchets – full details available from your local Teng Tools stockist.
-
Teng 1/4in Dr. Torque Screwdriver 1-5Nm**
Original price was: $NZ228.70.$NZ199.00Current price is: $NZ199.00.Torque Screwdriver
• For precision tightening of screws and bolts.
• For right hand action.
• With 1/4″ drive and adapter for 1/4″ bits.
• Suitable for e.g. fine mechanics, electronics, etc.
• Tolerance ±6%
• Supplied in plastic box.
Torque Range ISO: 1-5 Nm
Drive for Bits: 1/4 inch
-
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
$NZ140.40Torque wrench according to DIN3122. With ratchet, the torque wrench can be used for both tightening, and final checking of the torque. Reversible with lever, but only for right-hand action torque checking. Equipped with angular gauge for after tightening. Dual scale Nm & ft/lb. Lockable setting. Accuracy ±4%. Supplied with factory calibration certificate.
Specification:
• Range – 5-25Nm (4-18 ft/lb)
• Scale – 0.4Nm (0.4 ft/lb)
• Overall Length – 277mm
• Weight – 580gm
** After use ALWAYS return torque setting to zero **
-
Teng 1/4in Long Ratchet Flexible Head 43 Teeth 200mm
Original price was: $NZ100.40.$NZ85.00Current price is: $NZ85.00.Features
• 200mm long handle for added torque when needed.
• Flexible ratchet head with locking mechanism for use at different angles.
• 43 teeth giving 8 degree increments between clicks.
• Twist reverse for quickly and easily changing between tightening and loosening.
• Quick release for easier changing between different sockets and accessories.
• Bi-material grip for extra comfort.
-
Teng 1/4in Ratchet Long Arm 43 Teeth 200mm
Original price was: $NZ79.50.$NZ65.00Current price is: $NZ65.00.• 200mm long handle for added torque when needed.
• 43 teeth giving 8 degree increments between clicks.
• Twist reverse for quickly and easily changing between tightening and loosening.
• Quick release for easier changing between different sockets and accessories.
• Bi-material grip for extra comfort.
-
Teng 105pc 1/2in Dr. Metric H/Duty Vehicle Tool Set
THDV105 | Teng 105pc 1/2in Dr. Metric H/Duty Vehicle Tool Set
The 105 hand tools have been selected to handle the most common maintenance tasks that are carried out on heavy machinery or heavy vehicles. Supplied in a hard wearing portable case making it easy to bring all of the tools required directly to job.
The kit consists of an FRP ratchet, extension bar, 17” flex handle, 6-point ½” drive regular sockets from 8-32 mm, ½” drive hex sockets from 5 to 19 mm, several combination spanners from 8 to 32 mm, adjustable wrenches, pliers, side cutters, bits and bits driver, hex key set, flat screwdriver and either a ball pein hammer or an engineers style hammer depending on the set that you choose.
Designed and manufactured to DIN and ISO standards.
-
Teng 10in / 250mm Wide Jaw Adjustable Wrench
Original price was: $NZ108.30.$NZ79.00Current price is: $NZ79.00.Adjustable wrenches with an extra wide jaw opening. Chrome vanadium steel, a 15° jaw angle, ergonomically designed bi-material handle grip and phosphate finish with a graduated scale on the jaws. Exceeding international standards ISO6787-1982, ASME B.107.8-1996, BS6333-1995, DIN3117-1988, JIS B4604-1976.
• Capacity – 50mm / 2in
• Weight – 440gm
-
Teng 10in Quick Set Pliers Wrench
$NZ137.30MB483-10 | Teng 10in Quick Set Pliers Wrench
The TengTools 10-inch quick set pliers wrench MB483-10 is a highly versatile tool tailored for professionals in fields such as automotive repair, plumbing, and general maintenance. This tool effectively eliminates the need for multiple sets of mm and inch spanners, making it a practical asset in any toolkit. Its design prevents surface damage when working with delicate, plated pipe fittings. The tool’s capabilities extend to gripping, holding, pressing, and bending. The parallel jaws are engineered for a firm and consistent grip, providing increased control and efficiency. • Eliminates the need for multiple spanner sets, offering a convenient all-in-one solution
• Ideal for damage-free work on plated fittings, preventing marring or scratching
• Versatile in function, capable of gripping, holding, pressing, and bending
• Parallel jaws design ensures a solid and consistent grip across various applications
Specification
• Capacity: 45mm
• Jaw depth: 35mm
• Tethering facility: No
• Length: 250mm (10in)
• Net weight: 422g
-
Teng 10in/250mm Iq Series Adjustable Wrench
Original price was: $NZ78.60.$NZ65.00Current price is: $NZ65.00.Industrial adjustable wrenches made of chrome vanadium. Exceeding international standards ISOO6787-1982, ASME B.107.8M-1996, BS6333-1995, JISB4604-1976. The 15° jaw allows the wrench to be used in narrow areas as only 30° turning is needed. The wider jaw opening increases the range of bolt sizes that can be fitted. Non protruding on the moveable jaw end gives better access where space is limited. Black phosphate finish with graduated scale and bi-material grip handle.
• Capacity – 33mm / 1-1/4in
• ISO Norm – 320Nm
• Weight – 440gm
-
Teng 11pc Screwdriver Set – Flat | Phillips | Pozi
Original price was: $NZ113.85.$NZ81.90Current price is: $NZ81.90.MD911N | Teng 11pc Screwdriver Set – Flat | Phillips | Pozi • TT-MV PLUS steel blades for added torque. • Bi-material handles for easy use with higher torque and faster speed. • Hole in the handle for hanging or for use as a T-Handle for extra torque or with a fall protection wire if needed. • Designed and manufactured to DIN5264 • Supplied in a handy carrying case.
-
Teng 11pc Screwdriver Set- Flat | Phillips | Pozi | Robinson
Original price was: $NZ103.45.$NZ84.00Current price is: $NZ84.00.MD911N1 | Teng 11pc Screwdriver Set- Flat | Phillips | Pozi | Robinson • TT-MV PLUS steel blades for added torque. • Bi-material handles for easy use with higher torque and faster speed. • Hole in the handle for hanging or for use as a T-Handle for extra torque or with a fall protection wire if needed. • Designed and manufactured to DIN5264 • Supplied in a handy carrying case.
-
Teng 12in / 300mm IQ Series Adjustable Wrench
Original price was: $NZ97.70.$NZ85.00Current price is: $NZ85.00.Industrial adjustable wrenches made of chrome vanadium. Exceeding international standards ISOO6787-1982, ASME B.107.8M-1996, BS6333-1995, JISB4604-1976. The 15° jaw allows the wrench to be used in narrow areas as only 30° turning is needed. The wider jaw opening increases the range of bolt sizes that can be fitted. Non protruding on the moveable jaw end gives better access where space is limited. Black phosphate finish with graduated scale and bi-material grip handle.
• Capacity – 38mm / 1-1/2in
• ISO Norm – 515Nm
• Weight – 660gm
-
Teng 12in/300mm Std Aluminium Frame Hacksaw
Original price was: $NZ47.10.$NZ39.00Current price is: $NZ39.00.Complete With Hss 24T Blade701 – 12IN / 300MM Hacksaw• Professional quality Aluminium hacksaw frame with soft rubber grip.• Includes facility for pre-setting at 45° & 90° cutting angle.• Includes Swedish M2 HSS 25T blade, with storage for extra blades.Overall Length: 390mm -
Teng 16pc 3/8in Dr. mm Socket Set 7-22mm 6Pnt
Original price was: $NZ78.60.$NZ69.00Current price is: $NZ69.00.M3816 – 3/8” Drive Clip Rail Socket Set
• 16 piece regular metric 6-point sockets.
• Chrome vanadium with stain finish.
• Supplied on a clip holder with socket clips.
• Sizes: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21 & 22mm
-
Teng 200mm/8in Insulated Long Nose Plier Bent
$NZ78.20MBV463-8 | Teng Insulated Long Nose Plier Bent 200mm
Teng Tools launches additional insulated tools specifically adapted for work on live circuits.
The circuits can be exposed to voltages up to 1000 volts. With standard tools, the technician risks getting bumps that cause serious injury or even death. To avoid this, it is important to use insulated tools when working on live wires and connections.
Teng Tools insulated VDE tools ensure ultimate protection even when used around live circuits with up to a 1000-volt potential. VDE insulated and tested according to the VDE regulations, tools for work in electrically live environments meet the requirements of the internationally acknowledged European IEC60900 standards.
Features
• Approved for live working up to 1,000 volts
• Long 45° offset jaws for easier access
• Jaws with a serrated grip for increased gripping power
• Chrome molybdenum alloy steel for durability and strength
• 80° cutting edge angle • TPR grip for a more secure and comfortable grip
• Design and manufactured to DIN5745 and IEC60900
Cutting Capacity
• Piano Wire: 1.5mm
• Hard Wire: 1.8mm
• Medium Hard Wire: 2.8mm
-
Teng 20pc 1/4in Dr. Socket Set 5.5-13mm
Original price was: $NZ120.10.$NZ99.00Current price is: $NZ99.00.TJ1420 | Teng 20pc 1/4in Dr. Socket Set 5.5-13mm
• 20 piece 1/4″ drive socket set
• Includes the Teng Tools reversible mini bits ratchet
• Includes all the most commonly used sizes from 5.5 to 13mm
• Regular 6 point single hexagon sockets for a better grip
• Teng Tools hip grip design for contact with the flat side of the fastening for reduced damage and use on rounded nuts and bolts • Chrome vanadium satin finish sockets • A selection of screwdriver and TX bits is included to fit a range of fastenings
• Supplied in the unique Teng Tools TJ tray
• Clear fold up lid to see which set you need to use • Sliding catch to secure the set when not in use
• Designed and manufactured to DIN and ISO standards
• Content:
• Accessories 1/4” bits ratchet 50mm magnetic bits holder 1/4”Mx1/4”Hex adaptor
• Regular sockets 6 point 5.5, 6, 7, 8, 9, 10, 13mm
• Bits 25mm Flat 0.6 x 4.5mm, 0.8 x 5.5mm, 1.2×6.5mm, PH1, PH2, PZ1, PZ2, TX10, TX15, TX20
