PLIERS
-
CHANNELLOCK 205mm Insulated Diagonal Cutting Plier, Posi-Grip
Original price was: $NZ110.60.$NZ85.00Current price is: $NZ85.00.Not all cutting edges are the same — only Channellock uses precision machined knife and anvil style cutting edges to ensure perfect mating and superior cutting edge life. The Channellock knife and anvil cutters ensure proper cutting edge alignment, resulting in a clean cut every time. Most manufacturers use two sharp edges which can become misaligned, losing their cutting effectiveness. Experience the difference for yourself. These genuine Channellock tools are proudly Made in the USA!
-
CHANNELLOCK 205mm Insulated Linesman Plier, Posi-Grip
Original price was: $NZ134.80.$NZ99.00Current price is: $NZ99.00.Features:
- Channellock blue grips for comfort.
- High carbon steel for superior performance on the job and specially coated for ultimate rust prevention.
- Precision machined knife and anvil style cutting edges to ensure perfect mating and superior cutting edge life.
- Laser heat treated jaws for extended service life.
- Made in the USA.
Specifications:
- Overall Length: 215mm
- Jaw Length: 32.5mm
- Joint Thickness: 12.5mm
- Joint Width: 25.5mm
- Cutting Edge: 16.5mm
- Nose Width: 9mm
- Handle Span: 48mm
- Weight: 404g
-
CHANNELLOCK 205mm Insulated Long Nose Plier, Posi-Grip
Original price was: $NZ99.60.$NZ79.00Current price is: $NZ79.00.Channellock Long Nose Pliers are engineered to operate in tight spaces. A crosshatched teeth pattern provides reliable grip in either direction while a narrow nose profile provides extra precision. Made in the USA.
-
CHANNELLOCK Linesman and Diagonal Cutting Plier Set
Original price was: $NZ186.10.$NZ159.00Current price is: $NZ159.00.Set Includes:
- CH3238 – Diagonal Cutting Plier
- CH3248 – Linesman Plier
CH3238 Specifications:
- Overall Length: 200mm
- Jaw Length: 20mm
- Joint Thickness: 11mm
- Joint Width: 30mm
- Cutting Edge: 20mm
- Handle Span: 48mm
- Weight: 299g
CH3248 Specifications:
- Overall Length: 215mm
- Jaw Length: 32.5mm
- Joint Thickness: 12.5mm
- Joint Width: 25.5mm
- Cutting Edge: 9mm
- Handle Span: 48mm
- Weight: 404g
-
CRESCENT 200mm/8″ Locking Sheet Metal Clamp
$NZ49.20FEATURES- Compound action for powerful non-slip locking grip
- After initial grip is set, clamp can be tightened further by turning the adjusting screw with a hex key
- Red plastisol dip on release lever for improved comfort
- Nickel-plated finish resists rust and corrosion
- Maximum jaw opening meets ASME specifications
-
MILWAUKEE 178MM (7″) TORQUE LOCK™ CURVED JAW LOCKING PLIERS
Original price was: $NZ40.60.$NZ35.00Current price is: $NZ35.00.The MILWAUKEE® 178mm (7”) TORQUE LOCK™ Curved Jaw Locking Pliers maximises pressure points for any bolt, nut or locking tool application and has a jaw capacity of 55mm. The pliers’ hardened jaws give you increased gripping power and they are made of forged alloy steel for maximum durability, perfect for the toughest of job sites. The curved jaw pliers feature efficient and easy one-handed control release with ergonomic handles, an anti-pinch design as well as rust protection. MILWAUKEE® TORQUE LOCK™ locking tools provides you with faster set up and easy release when clamping round material. The TORQUE LOCK™ thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole design, it can also be used for hanging / storage purposes.
-
MILWAUKEE 203MM (8″) 1000V INSULATED DIAGONAL CUTTING PLIERS
Original price was: $NZ105.00.$NZ79.00Current price is: $NZ79.00.Our MILWAUKEE® 203mm (8″) 1000V Insulated Diagonal Cutting Pliers provide maximum leverage for easy cuts. The flame retardant 1000V layer of insulation on the handles provides maximum protection while the tapered nose allows for easier access and flush cuts. Our MILWAUKEE® 203mm (8″) 1000V Insulated Diagonal Cutting Pliers are UL classified and are certified to IEC 60900 and ASTM F1505 standards for insulated hand tools and are backed by Milwaukee’s Limited Lifetime Warranty.
-
MILWAUKEE 228MM (9″) 1000V INSULATED LINESMAN PLIERS
Original price was: $NZ105.00.$NZ79.00Current price is: $NZ79.00.Our MILWAUKEE® 228mm (9”) 1000V Insulated Linesman Pliers provide maximum leverage for easy cuts. The flame retardant 1000V layer of insulation on the handles provides maximum protection. These high-leverage pliers feature hardened iron carbide cutting edges designed to allow you to cut tough jobsite materials like wire and hardware with ease. All of our pliers are forged for strength. Our Milwaukee® 228mm (9”) 1000V Insulated Linesman Pliers are UL classified and are certified to IEC 60900 and ASTM F1505 standards for insulated hand tools and are backed by Milwaukee’s Limited Lifetime Warranty.
-
MILWAUKEE 48223402 254mm (10”) & 177mm (7”) TORQUE LOCK™ 2 Pack
Original price was: $NZ82.20.$NZ55.00Current price is: $NZ55.00.Features
- TORQUE LOCK™: Faster setup and easy release.
- Curved Jaw: Maximises pressure points for any bolt, nut or locking tool application.
- Hardened Jaws: Better grip force on jobsite material.
- Rust Protection: Increases tool life by reducing corrosion.
- Overmold Grips: Durable and comfortable.
-
MILWAUKEE 48223531 279mm (11″) TORQUE LOCK™ C-Clamp Locking Pliers Regular Jaws
Original price was: $NZ62.60.$NZ54.00Current price is: $NZ54.00.MILWAUKEE® TORQUE LOCK™ locking tools provides you with faster set up and easy release when clamping round material. The TORQUE LOCK™ thumb screw provides the user with a more convenient geometry for hand force, while providing clearance to generate more torque with the unique screwdriver through-hole design, it can also be used for hanging / storage purposes. The MILWAUKEE® 279mm (11”) TORQUE LOCK™ C-Clamp Locking Pliers Regular Jaws are designed to provide more clamping versatility on variety of shapes and surfaces and has a jaw capacity of 101.6mm. The pliers’ hardened jaws give you increased gripping power and they are made of forged alloy steel for maximum durability, perfect for the toughest of job sites. The C-Clamp Locking Pliers Regular Jaws feature efficient and easy one-handed control release with ergonomic handles, an anti-pinch design as well as rust protection.
-
MILWAUKEE 48226539 9PC SNAP RING PLIERS SET
Original price was: $NZ376.00.$NZ299.00Current price is: $NZ299.00.Our 9pc Convertible Snap Ring Pliers Set features an all-metal dial that quickly switches between internal and external modes. The all-metal dial is more durable than competitors. The anti-slip dial makes it easier to convert the pliers when working with both internal and external snap rings. The allmetal dial provides the ability to withstand harsh environments. The adaptable storage rack optimises drawer space by including a detachable handle to fit in tight spaces or carry on the go. The storage rack also includes magnets and hang holes to hang vertically when drawer space is very limited, making for the most adaptable snap ring plier storage. Our Convertible Snap Ring Plier Set is backed by a Limited Lifetime Warranty.
-
STANLEY® DYNAGRIP® Combination Pliers (200mm)
Original price was: $NZ32.70.$NZ29.00Current price is: $NZ29.00.- HEAVY DUTY CONSTRUCTION: Manufactured from drop-forged steel for strength and durability
- CORROSION-RESISTANT: Black oxide finish helps resist corrosion for extended product life
- THREE-ZONE HANDLE: Ergonomically designed Three-Zone Bi-material grips for comfort and control
-
STANLEY® FATMAX® End Cut Compound Action Pliers (190mm/7-1/2in)
Original price was: $NZ56.00.$NZ49.00Current price is: $NZ49.00.- Meet or Exceed ANSI Specs
- COMFORT: Bi-material handle ensures comfort and minimum risk of fatigue
- FINISH: Carbon Steel Forged Construction and heat treated jaws with ground Finish
-
Teng 10in Quick Set Pliers Wrench
$NZ137.30MB483-10 | Teng 10in Quick Set Pliers Wrench
The TengTools 10-inch quick set pliers wrench MB483-10 is a highly versatile tool tailored for professionals in fields such as automotive repair, plumbing, and general maintenance. This tool effectively eliminates the need for multiple sets of mm and inch spanners, making it a practical asset in any toolkit. Its design prevents surface damage when working with delicate, plated pipe fittings. The tool’s capabilities extend to gripping, holding, pressing, and bending. The parallel jaws are engineered for a firm and consistent grip, providing increased control and efficiency. • Eliminates the need for multiple spanner sets, offering a convenient all-in-one solution
• Ideal for damage-free work on plated fittings, preventing marring or scratching
• Versatile in function, capable of gripping, holding, pressing, and bending
• Parallel jaws design ensures a solid and consistent grip across various applications
Specification
• Capacity: 45mm
• Jaw depth: 35mm
• Tethering facility: No
• Length: 250mm (10in)
• Net weight: 422g
-
Teng 200mm/8in Insulated Long Nose Plier Bent
$NZ78.20MBV463-8 | Teng Insulated Long Nose Plier Bent 200mm
Teng Tools launches additional insulated tools specifically adapted for work on live circuits.
The circuits can be exposed to voltages up to 1000 volts. With standard tools, the technician risks getting bumps that cause serious injury or even death. To avoid this, it is important to use insulated tools when working on live wires and connections.
Teng Tools insulated VDE tools ensure ultimate protection even when used around live circuits with up to a 1000-volt potential. VDE insulated and tested according to the VDE regulations, tools for work in electrically live environments meet the requirements of the internationally acknowledged European IEC60900 standards.
Features
• Approved for live working up to 1,000 volts
• Long 45° offset jaws for easier access
• Jaws with a serrated grip for increased gripping power
• Chrome molybdenum alloy steel for durability and strength
• 80° cutting edge angle • TPR grip for a more secure and comfortable grip
• Design and manufactured to DIN5745 and IEC60900
Cutting Capacity
• Piano Wire: 1.5mm
• Hard Wire: 1.8mm
• Medium Hard Wire: 2.8mm
-
Teng 4pc Circlip Plier Set – External/Internal
$NZ35.90With Interchangeable Heads.480 4 Piece Circlip Plier Set• For internal and external circlips 10-50mm.• Four interchangeable heads giving eight different combinations.• The tips are magnetic.• Return spring.• Plastic covered handles. Contents: Tips (magnetic) – internal/external 90 degree tips Tips (magnetic) – internal/external 45 degree tips Tips (magnetic) – internal/external straight 1.5mm tips Tips (magnetic) – internal/external straight 1.2mm tips Handle – Reversible, spring loaded handles with locking pin -
Teng 7in Quick Set Pliers Wrench
$NZ109.90MB483-7 | Teng 7in Quick Set Pliers Wrench
The TengTools 7-inch quick set pliers wrench MB483-7 is a convenient addition to the professional’s toolkit, merging the functionality of multiple tools into one. This versatile plier wrench is engineered to replace both mm and inch spanners, providing practical functions like gripping, holding, pressing, and bending. The tool is especially advantageous for mechanical and automotive repairs, and for handling delicate or plated fittings in plumbing and electrical installations without surface damage. The parallel jaws ensure a more solid and consistent grip for a variety of tasks.
• Eliminates the need for multiple spanner sets, offering a convenient all-in-one solution
• Ideal for damage-free work on plated fittings, preventing marring or scratching
• Versatile in function, capable of gripping, holding, pressing, and bending
• Parallel jaws design ensures a solid and consistent grip across various applications Specification
• Capacity: 37mm
• Jaw depth: 25mm
• Tethering facility: No
• Length: 180mm (7in)
• Net weight: 223g
-
Teng 8in Insulated Cable Cutter
$NZ97.70MBV444-8 | Teng Insulated Cable Cutter
Teng Tools launches additional insulated tools specifically adapted for work on live circuits.
The circuits can be exposed to voltages up to 1000 volts. With standard tools, the technician risks getting bumps that cause serious injury or even death. To avoid this, it is important to use insulated tools when working on live wires and connections.
Teng Tools insulated VDE tools ensure ultimate protection even when used around live circuits with up to a 1000-volt potential.
VDE insulated and tested according to the VDE regulations, tools for work in electrically live environments meet the requirements of the internationally acknowledged European IEC60900 standards.
Features
• Approved for live working up to 1,000 volts
• Ideal for cutting copper and aluminium cable up to 38mm²
• One hand function with pitch guard for simple safe operation
• High carbon steel for durability and strength
• TPR grip for a more secure and comfortable grip
• Design and manufactured to IEC60900
• Electric Cable: 11mm/38mm2
-
Teng MB 8in 1000V VDE Combination Plier
$NZ70.80MBV451-8 | Teng MB 8in 1000V VDE Combination Plier
• Approved for live working up to 1,000 volts
• Features a pipe grip with serrated jaw for a more secure grip
• Chrome molybdenum alloy steel for durability and strength
• 80° cutting edge angle
• TPR grip for a more secure and comfortable grip
• Designed and manufactured to DIN5746 and IEC60900
• Length: 200mm
• Cuts Piano Wire: 2.0mm
• Cuts Steel Wire: 2.2mm
• Cuts Iron Wire: 4.0mm
-
Teng MB 8in H/Duty Linesman Plier
Original price was: $NZ59.70.$NZ50.00Current price is: $NZ50.00.Combination Plier
• High leverage combination pliers.
• Chrome molybdenum steel.
• 80° cutting edge angle.
• Single joint.
• With pipe grip and serrated grip surfaces.
• Rubber dipped handles.
• DIN 5746.
Length: 200mm
Cuts piano wire: 2.0mm
Cuts steel wire: 2.0mm
Cuts iron wire: 4.0mm
-
Teng MB 8in Long Nose Plier
$NZ47.70Long Nose Plier
• Chrome molybdenum steel.
• 80° cutting edge angle.
• Single joint.
• Polished head.
• Long, straight jaws.
• Serrated grip surface.
• Rubber dipped handles.
• DIN 5745.
Length: 200mm
Cuts piano wire: 1.5mm
Cuts steel wire: 1.8mm
Cuts iron wire: 2.8mm
