TOOLS
-
DEWALT DCZ585P2-XE 18V 5PC COMBO KIT – 5AH
$NZ1,259.00- DCD996 3 Speed Hammer Drill Driver delivers up to 95Nm of torque and has a max drilling capacity of 55mm in wood
- DCF860 Impact Driver delivers 282Nm of torque in a 123mm compact body perfect for a wide range of applications
- DCS369 18V Reciprocating Saw combines XR performance and durability with a smaller, lightweight form factor, delivering outstanding runtime, power and flexibility
- DCG408 125mm Angle Grinder features a brushless motor producing up to 850 MWO and up to 9,000 RPM
- DCS570 18V 184mm Circular Saw has a brushless motor, a no load speed of 5,500rpm and a maximum cut depth of 65mm
- x DCB184 18V XR 5.0Ah Battery Packs, Multivoltage Charger and Heavy Duty DWST1-81341 550mm Duffle Bag.
-
DEWALT DW682K-XE 600 W – Biscuit Jointer
$NZ399.00DW682K-XE600 W – Biscuit Jointer
- Anti slide grippers, eight guiding notches and fence window to aid accurate cuts
- Spindle lock mechanism for quick and easy blade changes with a single spanner
- Pre-set cutting depths for 0, 10 and 20 biscuit sizes with additional fine adjustment for ultimate accuracy
-
DEWALT DW735-XE 330mm Three Knife, Two Speed Portable Thicknesser
$NZ1,729.00- Powerful 1800W motor handles larger cuts in wider materials with ease
- Three knife cutter-head with 10,000 RPM cutter head speed delivers 30% longer knife life and makes knife change faster and easier
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 4m – 8m/min
-
DEWALT DWE4277-XE 125mm Angle Grinder
$NZ349.00- No volt release switch will prevent the unit starting when plugged in, even if the switch is in the on position. Switch must be consciously reset before power is delivered
- Overload protection will prevent the unit over heating by shutting the unit off until the unit has cooled down
- Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion and tracking
-
DEWALT DWE6423-XE 125mm Random Orbit Palm Sander 280W
$NZ305.00- 280 Watt variable speed motor adjusts from 8,000-12,000 orbits per minute, providing ideal sanding speed for all materials
- Low vibration allowing for extended usage without fatigue
- Built in dust extraction port allowing direct connection to dust extractor, or DEWALT AirLock system
-
DEWALT DWP849X-XE 150mm & 180mm variable speed polisher
$NZ709.00- Replaceable wool ingestion shields prevent wool from being sucked into the unit and blocking the tool
- Pop off brushes protect the armature from damage at the end of brush life resulting in greater motor life
- No volt release switch will prevent the unit from starting when plugged in, even if the switch is in the on position. Switch must be consciously reset before power is delivered
-
DeWALT DWS713-XE 254mm (10″) 1600W Fixed Head Compound Mitre Saw
$NZ449.00The DEWALT 254mm Dia single bevel fixed head compound mitre saw features powerful universal motor that delivers plenty of cutting power in high torque cutting applications. The compact design mitre saw with lock down motor head offers for effortless transportation. This extreme lightweight and rugged construction mitre saw offers maximum jobsite versatility. It contains 24 tooth saw blade, dust bag and blade spanner.
-
DEWALT DWS777-XE 216mm (8 1/2″) Cross Cut Mitre Saw (XPS)
$NZ1,259.00AVAILABLE INSTORE ONLY – NOT ABLE TO BE SHIPPED
- The classic saw design improved and updated for the modern user
- New 1800 Watt motor for powerful cutting in all materials
- XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity no adjustment required
-
DEWALT DWST1-75664-XE Tough System Music
$NZ709.00Features
- TOUGHSYSTEM™ Compatible
- 6 drivers best in category, 40W RMS, 2 sub-woofers for premium sound
- IP54 – protection against dust and water jets
- Bluetooth® Technology to remotely control your music
- 3.5mm Aux. Input, 2.4 Hz USB charger
- Class D amplifier, Digital Sound processor for sound optimisation
- Wide bandwidth 30Hz to 18KHz
- Dot Matrix pixel screen
- Power: AC & 18V/14.4V DEWALT battery charger, USB charger
- DAB+ with 12 FM presets
-
DeWALT x McLaren 18V XR 2 Piece 2 x 5.0Ah Combo Kit DCK200MP2T-XE
$NZ549.00DeWALT x McLaren F1 Team 18V XR Brushless Hammer Drill Driver and Impact Driver Twin Kit.
Kit Contains: DCD85M 18V XR 2 Speed Hammer Drill Driver, DCF85M 18V XR 3 Speed Impact Driver, 2 x DCB184 5.0Ah Batteries, DCB1104 4 Amp Charger, TSTAK Kitbox.
-
DEWALT® TOUGHSYSTEM® 2.0 Adjustable Work Light with Storage
$NZ415.00- 2-IN-1 FUNCTIONALITY – Illuminate work areas and transport essential tools with an adjustable work light featuring 2 pivoting LED heads and a compact storage box.
- POWERFUL LIGHTING – Brighten dim spaces with up to 4,000 lumens (using both lights) of natural white light and 7 brightness levels.
- CORDLESS OPERATION – using a DEWALT® 18V or FLEXVOLT® battery†
-
DREMEL 3000 (3000-1/26) ROTARY TOOL
$NZ0.00Technical specificationsRated power input130 WVoltage240 VWeight0,62 kgLength19 cmWidth5 cmDepth4.5 cmNo load speed10.000 33.000 1/minBattery technologyn.a.Speed settingVariableAccessory quick change systemEZ TwistPrecision tipDual temperatureRemovable cordDrip controlSound pressure77,4 dB(A)Sound power88,4 dB(A)Vibration2,4 5,4 m/s² -
DREMEL Stylo+ (2050-15) ROTARY TOOL
$NZ129.00-
Variable speed (5,000 to 22,000): For precise applications on creative DIY & craft projects.
-
Compact and lightweight design with 2-meter cord: Makes the tool easy and comfortable to use.
-
Ergonomic grip: Provides comfort and control for maximum precision.
-
Recessed collet lock: Prevents any interfering with the operation.
-
Separate on/off button: Saves your rotary speed settings even when the appliance is powered on and off.
-
-
DREMEL® 3000 (3000-2/30) ROTARY TOOL
Multi-Tool – Quick. Compact. All-round.
-
For all of your precision DIY projects: carve, engrave, rout, cut, sand, grind, sharpen, polish and clean
-
Work on your projects for extended periods of time
-
EZ Twist: Switch between applications within 1 or more projects easily
-
Multiple storage possibilities: packed in a sturdy case.
-
-
DREMEL® 4000 (4000-3/36) ROTARY TOOL
$NZ249.00-
Strong and dynamic Multi-Tool for everyday use
-
Tackle your precision carving, engraving, routing, cutting, sanding, grinding, sharpening, polishing and cleaning projects with just one tool
-
Experience maximum control and precision with the most variable rotary speed (5.000 – 35.000)
-
Comes in a spacious and sturdy storage case with a removable accessory tray for convenient storage.
-
-
FESTOOL 168mm Plunge Cut Saw in Systainer with 1400mm Rail-TS60K
Functions
Festool plunge-cut saws have been setting the standard for saws for decades. The TS 60 K is redefining this yet again. In the blink of an eye, the unique KickbackStop protects your workpiece and minimises the risk of injury. Perfectly coordinated with the entire Festool saw system and with a cutting depth of 60 mm.
The most versatile saw of its kind guarantees you premium work results. Of course, this is also the case for mitre cuts and solid worktops.
The TS 60 K now offers the unrivalled opportunity to combine it with the cross-cutting guide rail. In just a few steps, this produces a portable and easy-to-use compound mitre saw system for accurate angle cutting.
Thanks to the latest-generation brushless EC-TEC motor, the compact plunge-cut saw is extremely robust and powerful. It saws like a hot knife through butter, combining precision, flexibility and the highest cutting quality – whilst also offering enhanced safety. The TS 60 K: Worlds apart.
- Safer: The unique KickbackStop reduces the risk of injury caused by kickback during sawing or plunge-cutting into the workpiece
- Dive deeper: Greater cutting depth, at the same size and weight as the TS 55 F
- Versatile: Option to combine with the tried-and-tested guide rails and now with the FSK cross-cutting guide rails too
- Constant: EC-TEC motor in combination with the thin kerf saw blades ensures work progresses quickly whilst requiring less effort
- Precise: Simple, precise and repeatable mitre cuts can be achieved by setting mitre angles from -1° to 47°
- Convenient: The FastFix spindle stop and sophisticated design make it extremely easy to change the saw blade
- Best orientation: A transparent sliding viewing window provides a good view of the saw blade
-
FESTOOL 18V 80mm x 133mm Orbital 1/4 Sheet Sander in Systainer – RTSC400
$NZ713.00The ergonomic one-handed cordless orbital sander.
The new RTSC 400, DTSC 400, ETSC 125 cordless compact sanders ensure unparalleled mobility and ease of movement when working. The powerful 18 V battery pack with 3.1 Ah guarantees power similar to that of a mains-powered tool. And it is the key to an extremely compact design with balanced weight distribution and perfect ergonomics with a weight of just 1.4 kg. The integral dust extraction system, in combination with the long-life dust collection bag, enables the machine to be used flexibly – effortlessly even overhead, vertically or in hard-to-reach areas. The battery pack can be replaced with the plug it-mains adapter to achieve an unlimited running time – ideal for stationary applications and in combination with a Festool mobile dust extractor.
Main Applications
- Cable-free sanding where there is no power connection or where this is difficult to access (e.g. outdoors, on scaffolding)
- Mobile working when the power cable and suction hose are extremely disruptive to the application (e.g. vertical surfaces, overheard sanding, rendering edges, etc.)
- Ideal for vertical surfaces or overhead work
- One-handed sander for small and narrow surfaces
- Sanding off paint and varnish on window frames, door frames and eaves
- With plug it-mains adapter as a sanding machine with an unlimited running time during continuous electrical operation – ideal for use indoors in combination with a Festool mobile dust extractor
-
FESTOOL 18V Cordless Mobile Dust Extractor 4.5l M Class CTMCSYSL
$NZ1,085.60TECHNICAL DATAMaximum Airflow (litres per minute): 2,400 l/minMaximum Vacuum (Pa): 18 000 PaFilter Surface Area (cm2): 5 357 cm²Container/Filter Bag Capacity (litres): 4.5/3.5 LBattery Voltage (V): 2 x 18 VBattery Capacity (Ah): 4.0 Ah ONLYWeight – with 1 or 2 x 18V (Battery Pack): 6.00 kgDust Approval Rating Dust Class M – medium risk dust such as mineral and wood dustDimensions – L x W x H (mm) 396 x 297 x 307 mmWeight (kg) 8.8kgTechnology ie. Bluetooth: Bluetooth®Run time 2 x 4.0Ah: 14 – 25 min -
FESTOOL 18V HAMMER DRILL TPC18/4 Speed Li BASIC SYS
$NZ733.70Cordless hammer drill QUADRIVE TPC 18/4
TPC 18/4 Li BASIC
- Brushless EC TEC motor for maximum service life and huge degree of efficiency, combined with lithium-ion battery (batteries sold separately). 40% enhanced torque in 2nd gear.
- 4-gear transmission with up to 3,600 rpm for fast and neat drilling. Now with superior gear shift and kick back stop
- LED lighting which can be switched on separately and battery charging status display
- The universal solution for high-torque screwdriving and drilling operations with in wood, metal and concrete with the optional axial impact.
-
FESTOOL 55mm Plunge Router in Systainer-OF1010EBQ+
$NZ1,405.30Functions
Small tool for delicate tasks.
Extremely versatile. Extremely precise. Extremely easy to handle: Whether guided freely or on the guide rail, the OF 1010 router is the ideal one-handed device. Thanks to its size and low weight it can be guided along edges, lines or curves with just one hand. For routing profiles, grooves, rebates and dovetail joints – the OF 1010 impresses with a wide variety of technical solutions.
- Compact design and light weight
- Clear view of the routing area
- Quick and easy cutter changes
- Routing depth adjustment to 1/10 mm
- Torsionally rigid router table due to guide columns on both sides
- Greater safety thanks to quick-acting brake and restart protection
- MMC electronics for adaptation to the working material and temperature monitoring
- Chip extraction system integrated into the router table for hose diameters D 27 and D 36
-
FESTOOL 574351 OF2200 80mm Plunge Router in Systainer
$NZ2,024.00Nothing is impossible with this powerhouse
The OF 2200 router offers the most powerful low end torque, highest routing precision, and top ergonomic comfort. Producing a massive 2200 W of power, even routing the thickest, hardest materials is performed to perfection.
The double column clamping system guarantees accurate routing height, and all important controls are within easy reach to allow both hands to remain on the machine during use.
When used with the side stop or guide rail, the offset guide rods ensure easier routing in difficult materials for long periods. Pair with a Festool Dust Extractor to get up to 99% of all chips extracted during edge routing.
Main Applications
- Rounding, trenching and profiling
- Routing large cut outs, circles and arcs
- Creating worktop corner joints
- Routing seal channels in windows and doors
-
FESTOOL 574872 DF500 Q PLUS AND ASSORTMENT SYS
$NZ2,585.20The DOMINO system unites the precision of a round dowel with the flexibility of a traditional flat dowel – the perfect solution for panel joints.
The system consists of the DF 500 dowel jointer, DOMINOs in different sizes and a wide range of accessories for special applications. The result: extremely strong, invisible joints. And DOMINO can do much more: rack joints, frame joints, drawer joints, etc.
-
FESTOOL 575758 CTM26E MOBILE DUST EXTRACTOR
INSTORE ONLY, THIS ITEM CAN NOT BE SHIPPED
Technical data
Power consumption: 350-1200 W Airflow max.: 3900 l/min Max. vacuum: 24000 Pa Filter surface area: 6318 cm2l Container/Filter bag capacity: 26/24 l Dimensions (L x W x H): 630 x 365 x 540 mm Weight: 13.99 kg Items included
SELFCLEAN filter bag, suction hose Ø 27/32 mm x 3.5 m-AS/CT, hose holder, cable holder, cleaning accessories, -
FESTOOL 576019 GEARED SANDER RO150 FEQ 230V SYS
Technical data
Power consumption: 720 W ROTEX rotary motion speed: 320-660 min-1 Eccentric motion speed: 3300-6800 min-1 Sanding stroke: 5 mm FastFix sanding pad Ø: 150 mm Connection Ø d/e: 27 mm Weight: 2.3 kg Items included
FastFix sanding pad Ø 150 mm (soft HT), Festool PROTECTOR, in a SYSTAINER -
FESTOOL 576031 GEARED SANDER RO125 FEQ 230V SYS
$NZ1,377.70- Three machines in one: aggressive material removal when coarse sanding, extra-fine sanding pattern when fine sanding and perfect gleaming surfaces when polishing
- A powerful motor and combination of eccentric and orbital motion remove material three times faster than conventional eccentric sanders
- FastFix sanding pad system, tool-less
- Healthy, efficient dust extraction with the Jetstream principle
-
FESTOOL 576055 80 x 133mm Orbital 1/4 Sheet Sander in Systainer RTS400REQ
$NZ839.50Compact one-handed sander.
Makes sanding overhead for sustained periods of time effortless. The RUTSCHER orbital sander, delta sander and eccentric sander are equipped with maximum flexibility for individual task requirements: The new generation RTS, DTS and ETS 125.
They are characterised by compact design, with a weight of just 1.2 kg and the recently developed MMC control electronics that guarantee up to 25% greater removal capacity at constant powerful speed.
These sophisticated details may not sound spectacular – but they are certainly convincing. The integrated long-life chip collection bag for dust-free work, the aesthetically pleasing soft grip inserts, through to the PROTECTOR edge protection for less reworking.
The new generation RTS, DTS and ETS compact sanders: A visible, perceptible and even audible improvement.
Main applications
- Ideal for vertical surfaces or overhead work
- One-handed sander for small and narrow surfaces
- Sanding off paint and varnishes on window frames
- Sanding natural wood surfaces and veneering prior to varnishing – particularly furniture
- Sanding close to edges on different materials
-
FESTOOL 576076 ETS 150mm Random Orbital 3mm Sander in Systainer
$NZ1,029.30Perfect finishing sander.
The ETS 150/3 eccentric sander is the favourite when it comes to fine and extra-fine sanding. As the lightweight in its class, its 3 mm sanding stroke achieves an excellent surface quality while providing high power thanks to the MMC electronics. Whether it’s horizontal, vertical or overhead, the combination of soft grip and ergonomic rod handle means that the ETS 150/3 can adapt to all hand movements. Extremely smooth running, infinite speed adjustment, even during sanding, and the safe sanding pad brake make the ETS ideal for perfect surfaces.
Main applications
- Finish sanding on paintwork, wood and plastic
- Pre-sanding for polishing
- Final sanding of mineral materials
- Sanding high-gloss surfaces ready for polishing
- Sanding wooden surfaces ready for waxing
- Final sanding of fillers
-
FESTOOL 576084 ETS150/5 150mm Random Orbital 5mm Sander in Systainer
$NZ982.10Ideal intermediate sander.
The ETS 150/5 eccentric sander is the ideal intermediate sander and, with a 5 mm sanding stroke, achieves an optimum surface quality with a high material removal capacity. Suitable for large surfaces as well as working in detail – from primary to intermediate sanding. Whether it’s coats of paint, window frames or natural wood, sanding or surface-grinding metal surfaces, filled areas on plasterboard panels or adjoining wood grains in corners – even in critical areas the ETS 150/5 eccentric sander is in its element.
If you need any help to choose the right sander, check out our helpful guide with tips and videos on our range of 150mm sanders.
Main applications
- Intermediate and coarse sanding of clear coats and fillers
- For flat and curved surfaces
- Final sanding of fillers
-
FESTOOL 576211 70mm Plunge Router in Systainer OF1400
$NZ1,837.70Functions
Power and ease of operation in perfect harmony
The handy multi-talent: The OF 1400 router weighs just 4.5 kg – one of the lowest machine weights in its class.
The 70 mm routing stroke is impressive when making recesses for fittings or routing with templates. It also has a comprehensive set of equipment that enables it to master virtually any routing task.
Main applications
- Rounding, chamfering, rebating and profiling edges
- Routing circles and cut-outs with the multi-routing template
- Grooving rear panels or recessing dovetail batons with the guide system
- Routing with the routing aid to fit Schallex, draft excluders or espagnolettes
- Routing mineral material (max. cutter Ø 45 mm)
-
FESTOOL 576249 EHL65E 65mm Single Handed Planer in Systainer
$NZ845.30Modified slightly. Improved decisively.
Weighing just 2.4 kg and with a compact design, the EHL 65 electric planer is not only the lightest and lowest one-handed planer in its class, but also the most powerful.
4 mm planing and 23 mm rebate depth and excellent surface finish thanks to the unique spiral blade with pulling cut.
With SoftGrip handle and cutting depth adjustment, single-button operation and non-slip ridges on the housing for a secure hold. This means that the planer can be guided effortlessly, whether it’s horizontally or vertically, with one or two hands, with the left hand or right hand. In short: It’s ergonomic. Fast. Precise.
The one-handed planer for professionals.
-
FESTOOL 576264 GEARED SANDER RO90DXFEQ
$NZ1,354.70ROTEX RO 90 DX PLUS
- Four machines in one: High material removal capacity in coarse sanding mode with ROTEX rotary motion, extra-fine sanding pattern in intermediate sanding and fine sanding stages, cleaner corners with the delta sanding pad and shiny results when polishing
- Durable eccentric bearings, a double-sealed gear unit and a dustproof switch extend the service life of the machine
- ROTEX rotary motion for convenient polishing – the reduced speed keeps the temperature low and prevents the polish from clouding or spraying off
- FastFix sanding pad system, tool-less
-
FESTOOL 576297 BS75E-SET Belt Sander in Systainer with Sanding Frame Set
$NZ1,573.20Continuous precision
The 75 mm wide belt sander is the ideal tool for coarse and fine sanding of workpieces with absolute precision, parallel to the grain.
Working in only one direction along the grain prevents sanding rings from developing, thereby eliminating laborious and time consuming reworking. Easy to guide and comfortable to use, the BS 75 can also be quickly fitted to the flat area frame, significantly increasing the quality of your results.
The available bench set can also quickly and easily convert the belt sander to a bench-mounted unit, and clean working conditions are guaranteed when used with a Festool Dust Extractor.
Main Applications
- Fine sanding of flat surfaces
- Coarse sanding of flat surfaces
- Light sanding of high quality, veneered surfaces
- Sanding out planing blemishes
- Sanding strip material with the bench unit
-
FESTOOL 576324 ETS EC150/3 150mm Brushless Random Orbital 3mm Sander in Systainer
The perfect finishing sander in the compact class
The Festool ETS EC 150/3 random orbital sander is the ideal sander for fine and extra fine sanding. It’s compact and lightweight design makes all day work tireless. With an EC-TEC brushless motor, the tool uses power more efficiently and requires less maintenance. A Softgrip surface enables you to sand horizontal, vertical or overhead without exerting excess force. Vibration and extraction detection provides maximum safety. Used optimally with Festool Multi-Jetstream pads and abrasives, and a Festool Dust Extractor, the perfect, dust free finish is guaranteed with every job.
Main Applications
- Pre sanding of flat and curved surfaces
- Finish sanding on paintwork, wood and plastic
- Final sanding of fillers
- Fine sanding of mineral materials
-
FESTOOL 576333 ETS EC150/5 150mm Brushless Random Orbital 5mm Sander in Systainer
$NZ1,377.70The ideal intermediate sander in the compact class.
Perfectly built for manual operation. For reduced fatigue when carrying out overhead sanding work and a good feeling on edges, as well as convenient operation in any position. The ETS EC 150. At just 116 mm high and with a brushless EC-TEC motor and ergonomic housing geometry with perfectly balanced centre of gravity. And with additional innovative details such as automatic dust control, integrated sanding pad brake and the unique Vibration Control System for added health benefits.
Main Applications
- Intermediate and coarse sanding of clear coats and fillers
- For flat and curved surfaces
- Final sanding of fillers
-
FESTOOL 576732 PLUNGE SAW TSV60 KEBQ-PLUS With Scoring Function
Plunge Cut Saw TSV 60
TSV 60 KEBQ-Plus with scoring function
Technical data
Power consumption: 1500 W no load speed: 3000 – 6800 min-1 no load speed scorer: 16000 – 22000 min-1 Saw blade / scorer diameter: 168 / 47 mm Angular range: -1 to 47 ° Cutting depth: 0-62 mm Weight: 6 kg Items included
Splinterguard, viewing window, Allen key 5mm, fine tooth saw blade WD42, diamond scoring blade, in a SYSTAINER SYS3 M 337 -
FESTOOL 576847 18V MITRE SAW KSC60 EB Li BASIC Slide Compound In Carton
$NZ2,622.00AVAILABLE INSTORE ONLY – NOT ABLE TO BE SHIPPED
Cordless Sliding compound saw KAPEX KSC 60
KAPEX KSC 60 E Li BASIC
Technical data
Battery reqd: 18/36V and min 5.2Ah Idle engine speed: 1300-1800/3500 min-1 Saw blade diameter: 216 mm Inclination angle: 47 °/47 ° Cutting depth 90°/90°: 305 x 60 mm Weight:with 2 batteries 18.5 kg Items included
KSC60, HW universal saw blade W36, workpiece clamp, LED spotlight, smart bevel, increase, dust catcher, Allen key 6mm, in a carton -
FESTOOL 577067 CTMC MIDI 15l M Class 18V Cordless Mobile Dust Extractor
$NZ1,437.50Functions
Comparable power to your corded version thanks to the 36 V turbine with 2 x 18 V battery packs (4.0/5.2/8.0 Ah). This makes it ideal for mobile sawing, sanding or drilling.
Ideal combination with Festool cordless tools. Convenient and fast: The extractor switches on automatically via the Bluetooth® battery pack.
Switching on the extractor via the remote control directly on the suction hose saves you a trip to the extractor. Ideal for occasional cleaning tasks. Adjustable suction power in three levels. The appropriate level can be selected depending on the application, which increases the battery runtime.
With four battery packs and the TCL 6 DUO rapid charger, work can be done in most cordless applications without interruptions. Smooth and effortless. The suction hose will impress you with flexible handling and a long service life. It glides over every edge and possesses conical geometry for increased suction power.
The large internal hose holder makes it easy to stow the suction hose, ensuring safe and clean transport.
With the manual main filter and filter bag dedusting, the suction power can be quickly and easily recovered when the filter or filter bag is clogged. This significantly increases the fill level.
Quick, easy and tool-free. The attachable accessory case means that you have everything to hand. It offers space for additional battery packs and cleaning accessories (case available as an accessory).
The cordless dust extractor is approved for harmful dust particles in dust class M with limit values ≥0.1 mg/m³. It is suitable for the extraction of wood and mineral dust.
The flat storage area on top of the hose holder can be used as a seat or as a shelf for working materials. Thanks to T-LOC, the extractor can be coupled with Systainers.
MAIN APPLICATIONS
- On-site extraction for cordless tools for minor or brief sanding, sawing and drilling work
- Ideal for mobile use in service and installation work and for final cleaning
- Suitable for both wet and dry extraction (special wet filter required for wet extraction)
- For hazardous wood dust and mineral dust from dust class M with limit values > 0.1 mg/m³
-
FESTOOL CT-VA Cyclone Pre Separator
$NZ802.70Efficient, simple and reliable
The Festool CT Pre Separator with cyclone technology separates and collects coarse and fine dust before it reaches the mobile dust extractor. The dust heavy air that is drawn in is swirled into a spiral movement in the cyclone, causing the dust particles to hit against the wall of the cyclone and, due to the gravitational force, to fall into the collection container of the CT pre separator.
For craftsmen who work with large volumes of dust and debris, the CT Cyclone pre separator is the simplest answer for increasing the efficiency of your CT Dust Extractor and minimizing its lifetime cost of ownership all within a compact solution that fits seamlessly into the Festool Systainer modular storage system, allowing for easy storage and transportation.
Remove larger dust and debris before it fills your filter bag by using the CT Cyclone and reduce how often you need to replace filter bags and filters. Maintains a consistently high suction power as a result of reducing the dust load on the main filter.
-
FESTOOL CT25E MOBILE DUST EXTRACTOR
Workshop dust extractor CLEANTEC CT 25
CT 25E
Technical data
Power consumption: 350-1200 W Airflow max.: 3700 l/min Max. vacuum: 24000 Pa Filter surface area: 3369 cm2 Container/Filter bag capacity: 25/22.5 l Dimensions (L x W x H): 470 x 320 x 508 mm Weight: 10.4 kg Items included
Antistatic suction hose Ø 27/32 mm x 3.5m, self clean filter bag, crevice nozzle and upholstery nozzle, in a carton -
FESTOOL Guide Rail 1400mm FS 1400/2 Item No. 491498
$NZ266.80Keeping it straightMade from anodized aluminium, Festool Guide Rails are available in eight different lengths from (800 mm – 5000 mm), providing the right rail for every application. The integrated splinterguard aligns perfectly to your cut line, saving set up time and serving as protection against tear out, on cuts both with the grain and across.
Guide rails make work easier by taking the tool to the work, and save time and money by eliminating laborious measurements, rework and wasted material. Connect rails using Festool Guide Rail Connectors to make limitless cuts.
Non skid, dual clamping rubber strips prevent movement during the cutting operation, saving significant set up time.
-
FESTOOL PLUNGE SAW RAIL Adjustable Clamps 120 mm – Pack 2
$NZ100.10Gripping in every wayDesigned as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, or just about any other application. Designed to work seamlessly with holes and channels on the Festool MFT Multifunction Table and can be inserted into bottom t slot of Festool FS Guide Rails for limitless positioning. Clamping thickness 120 mm.
-
FESTOOL Power Adapter ACA 18V to 240V Ergo
$NZ216.20Continuous electric operation
Carry out work that requires a longer operating time by swapping the 18V battery pack for the plug-it power adapter. For use with DTSC 400, ETSC 125, RTSC 400 cordless sanders, performance that’s like working from an electrical socket.
COMES WITH LEAD
-
GrizzlyPRO LED Rechargeable Headlight
Original price was: $NZ52.50.$NZ45.00Current price is: $NZ45.00.GrizzlyPRO’s stylish headlight offers six light functions to suit varied demands on the go. A weightless and snug fit, comfortable for wearing over long durations. The adjustable elastic headband can easily be adjusted for your kind of comfort.
The all-new BLUE model features a Turbo mode that brings maximum light – all lights at full brightness.
Headlights offer a practical solution without compromising function. With hands-free it offers you convenience on the farm or in the workshop. It’s also the perfect accessory for low light sports and outdoor recreation. The Grizzly headlight is also equipped with a red light, ideal as night vision for hunters and a motion sensor function that can be set on or off.
GrizzlyPRO headlights project a wash light and focus light. A “wash” will bathe a wider area with light and softer edges, while the ‘focus’ light is more concentrated light, where light needs to be focused on a point.
Equipped with low battery light, recharge the headlight with the supplied USB charging cable, Type-C.
-
GrizzlyPRO LED Rechargeable Work Light Polar Pro 2200LM
Original price was: $NZ126.00.$NZ99.00Current price is: $NZ99.00.Lighten up folks! GrizzlyPRO brings you the Polar Pro LED rechargeable work light. Illuminating a mighty 2200 lumens through the long-lasting integrated COB LED technology, the Polar Pro shines at the best colour temperature of 5700K (daylight) ensuring you have the best colour of light to work with at all times.
GrizzlyPRO lights project a wash light. A “wash” will bathe an area with light and have soft edges on the beam. Washes are great for evenly lighting up large areas.
The Grizzly Polar Pro has two light settings, high and low. The incorporated adjustable stand allows you to angle the Polar Pro to your desired light projection. Additional functionality from the stand allows you to hang, sit, secure with the built-in magnets or mount it on a tripod.
GrizzlyPRO is designed for the toughest of environments, with heavy-duty aluminium cast and industrial ABS housing, it provides robust strength and durability, making it suitable for home users to professional workers such as tradies and mechanics, who can use this for early morning starts or vehicle inspections where light can be limited.
With the work lights USB-C power outlet, the device acts as a power bank allowing you to charge your phone or device on the go.
The Grizzly Pro rechargeable series really does pack quite the punch.
-
GrizzlyPRO LED Rechargeable Work Light Polar Pro 3800 Lumens
Original price was: $NZ178.50.$NZ159.00Current price is: $NZ159.00.GrizzlyPRO rechargeable lighting solution is compact, reliable and portable. Integrated with long-lasting COB LED technology, these models are a proven series chosen by the professionals.
GrizzlyPRO has launched doubled the size of the Polar Pro – now available in 40watts! Illuminating a hefty 3800 lumens through the long-lasting integrated COB LED technology, the 40W Polar Pro shines at the best colour temperature of 5700K (daylight) ensuring you have the best colour of light to work with at all times.
GrizzlyPRO lights project a wash light. A “wash” will bathe an area with light and have “soft” edges on the beam. Washes are great for evenly lighting up large areas.
The Grizzly Polar Pro has two light settings, high and low. The incorporated adjustable stand allows you to angle the Polar Pro to your desired light projection. Additional functionality from the stand allows you to hang, sit, secure with the built-in magnets or mount it on a tripod.
GrizzlyPRO is designed for the toughest of environments, with heavy-duty aluminium cast and industrial ABS housing, it provides robust strength and durability, making it suitable for home users to professional workers such as tradies and mechanics, who can use this for early morning starts or vehicle inspections where light can be limited.
With the work lights USB-C power outlet, the device acts as a power bank allowing you to charge your phone or device on the go.
The Grizzly Polar Pro 40W can make your life brighter. -
GrizzlyPRO LED Work Light Edge 6500Lm
Original price was: $NZ136.50.$NZ109.00Current price is: $NZ109.00.Fun fact: Putting the GrizzlyPRO Edge LED work light too close to you would not be the brightest idea! Its cool white light is no match for your eyes but is ideal for painters and plasterers when working or screening workmanship. With long-lasting integrated SMD LED technology, the Grizzly Edge shines at the best colour temperature of 5700K (daylight) ensuring you have the best colour of light to work with at all times.
GrizzlyPRO lights project a wash light. A “wash” will bathe an area with light and have soft edges on the beam. Washes are great for evenly lighting up large like architecture, walls, workshops and construction sites.
Grizzly has incorporated a clean slimline design for the Edge series, allowing it to look slick when placed outdoors or indoors or to save space when stored. The Edge work light is easy to use. Simply place it down on its base, hang it, or secure it to a tripod and plug in the power cord and switch it on.
The heavy-duty cast aluminium and industrial ABS housing provide strength and durability, with an industrial powder-coated aluminium frame & padded carry handle, you can easily adjust the frame to the desired light angled for your application.
GrizzlyPRO makes sure your toughest, dirtiest jobs are well-lit and safe.
-
GrizzlyPRO LED Work Light Edge 8000Lm
Original price was: $NZ178.50.$NZ129.00Current price is: $NZ129.00.Bright and light. The GrizzlyPRO 8000 Lumen Edge LED work light will for sure light up your life. It shines a cool white light making it an ideal solution for painters and plasterers when working or inspecting. With long-lasting integrated SMD LED technology, the Grizzly Edge shines at the best colour temperature of 5700K (daylight) ensuring you have the best colour of light to work with at all times.
GrizzlyPRO lights project a wash light. A “wash” will bathe an area with light and have soft edges on the beam. Washes are great for evenly lighting up large like architecture, walls, workshops and construction sites.
GrizzlyPROs slimline Edge design makes it light and easy to carry from place to place, also saving space when stored. The Edge work light is easy to use. Simply place it down on its base, hang it, or secure it to a tripod and plug in the power cord and switch it on.
The heavy-duty cast aluminium and industrial ABS housing provide strength and durability, with an industrial powder-coated aluminium frame & padded carry handle, you can easily adjust the frame to the desired light angled for your application.
GrizzlyPRO makes sure your toughest, dirtiest jobs are well-lit and safe.
-
HIKOKI 1050W Heavy Duty Sabre Saw CR13VB(G1Z)
$NZ469.00- Powerful 1050W motor
- Unique ‘swing’ action for faster cutting of most materials
- Tool-less blade changing and shoe plate adjustment
- Speed controlled by both a pre-set dial and the trigger switch
- Rubber, non-slip, front and rear hand grips
- Blades can be mounted upside down to perform pocket cuts
- Accepts standard sabre saw blades
-
HIKOKI 1600mm Guide Rail (Suits C3606DPA)
$NZ253.00For straight and secure guidance Splinter protection reduces breakout when sawing Adhesive coating for safe, non-slip surface contact as well as protection of the workpiece surface With holes to fix the rail to the workpiece and for hanging storage Can be extended in length with the second guide rail and FSV connector (accessory). Part Number FS160INBAG supplied by sister brand Metabo Power Tools.
-
HIKOKI 36V 1,100Nm 3/4″ Impact Wrench Bare Tool
$NZ529.00Product Specs
Capacity Bolt M12 – M30 High Tension Bolt M10 – M24 Square Drive 19mm (3/4″) Tightening Torque 1,100Nm Nut Busting Torque 1,800Nm Voltage 36V Multi Volt No Load Speed High Mode 0 – 1,500/min Medium Mode 0 – 1,200/min Low Mode 2 0 – 900/min Low Mode 1 0 – 600/min Full Impact Rate High Mode 0 – 2,900/min Medium Mode 0 – 2,300/min Low Mode 2 0 – 1,800/min Low Mode 1 0 – 1,200/min Approximate Tightening Torque High Mode 1,100Nm Medium Mode 800Nm Low Mode 2 600Nm Low Mode 1 400Nm Overall Length 221mm Weight 3.7kg (BSL36A18) Standard Accessories Belt Hook. Supplied without batteries and charger. -
HIKOKI 36V 1/2″ 770Nm Impact Wrench Bare Tool
$NZ515.00Product Specs
Capacity Bolt 10 – 22mm High Tension Bolt 8 – 16mm Drive 1/2″ square Voltage 36V No Load Speed 0 – 1500/1800/2100/2,400/min Full Load Impact Rate 0 – 3,400/min Torque 770Nm Nut Busting Torque 1050Nm Overall Length 169mm Weight 2.6kg -
HIKOKI 36V 20mm Heavy Duty Impact Drill Bare Tool
$NZ475.00Capacity
Drill Chuck 13mm (Keyless) Capacity Core Bit 160mm Masonry 20mm Steel 16mm Wood 40mm Battery Voltage 36V No Load Speed High 0-1,4000/min Low 0-1,000/min Impact Mode High 18,200/min Low 13,000/min Motor Type Brushless Overall Length 340mm Weight 3.3kg (BSL36A18) Standard Accessories Supplied without battery and charger -
HIKOKI 36V Brushless 76mm Belt Sander Bare Tool
$NZ535.00Product Specs
Belt Size 76mm x 533mm Belt Speed 122 – 450m/min Speed Modes 5 Speeds + AUTOmode Switch Type Trigger Tracking System Tool-free Belt-changing System Tool-free (Lever) Battery Voltage 36V Multi Volt Motor Type Brushless Length 330mm Weight 4.5kg (BSL36B18) Standard Accessories Includes Dust Bag, 1x #80 Sanding Paper. Supplied without batteries and changer -
HIKOKI 36V Brushless Impact Drill and Impact Driver 2PC Kit
HiKOKI 36V Brushless Impact Drill & Impact Driver Kit featuring best-in-class power and performance from the DV36DC 36V 155Nm Impact Drill paired up with our legendary WH36DC 36V 215Nm Triple Hammer Impact Driver. The KC36DC(GRZ) Twin Pack leads the way with next-gen technology like 36V High Powered Brushless Motor technology, Reactive Force Control with Gyro-Sensor, and WH36DC Triple Hammer anvil design for superior power, performance, and handling. Powered by 1080W Multi Volt battery technology – this kit will keep you at the top of your game. The KC36DC(GRZ) also features lightening quick 32-minute fan-cooled rapid charging so you are able to be on the tools for longer.
-
HIKOKI 36V High Powered Brushless Sabre Saw Bare Tool
$NZ529.00Product Specs
Capacity Pipe 130mm Steel Plate 19mm Wood 300mm Voltage 36V Multi Volt No Load Speed Slow Speed 0 – 1,700/min Medium Speed 0 – 2,000/min High Speed 0 – 2,500/min Fastest Speed 0 – 3,000/min Stroke Length 32mm Orbital Cutting Yes Speed Control 4 Stage Counterweight System Twin-rotating system Length 457mm Weight 4.8kg (BSL36A18) Standard Accessories Curve Blade. Supplied without batteries or charger. -
HIKOKI AL18DA(G4Z) 18V Cordless 450g Grease Gun Bare Tool
$NZ615.00Product Info
- Variable flow dial with up to 10 pre-set discharge pressure settings
- High discharge pressure (690 bar)
- Detachable LED light on hose for high visibility
- 1200mm flexible hose length for quick easy access into tight spaces
- 3-way filling system : Grease cartridge, containers or direct filling
- Lock-on trigger for continuous operation
- Two-mode operation – select between high pressure and high flow rate
- Compact and lightweight Grease Gun
- Supplied without batteries, charger. Includes Shoulder Belt, Clam Coupling.
-
HIKOKI C1806DB(G4Z) 18V Brushless 165mm Circular Saw Bare Tool
$NZ465.00- High performance Brushless motor
- 165mm blade with deep cut configuration – max cut 66mm at 90°
- Super compact and lightweight with excellent ergonomics, and right hand configuration
- Unique Silent mode allows for quieter operation and 30% longer runtime with automatic switching to power mode when work load increase
- Two ultra-bright LED lights
- Rotatable dust exhaust with quick release
- Soft start and electric brake
- Quick and easy blade change
- Bevel Capacity – max cut 45mm at 45°
- Supplied without batteries, charger and carry case. Includes Blade, Dust Exhaust
-
HIKOKI C3606DB(G4Z) 36V Brushless 165mm Circular Saw Bare Tool
$NZ589.00- High performance brushless motor
- ‘Deep Cut’ configuration – max cut 66mm at 90°
- Super compact and lightweight
- Bevel Capacity – max cut 45mm at 45°
- Silent mode allows for quieter operation
- Two ultra-bright LED lights
- Quick and easy blade change
- Easy to use switch lock
- Blower function with backward dust exhaust
- Soft Start function
- Excludes batteries, chargers. Includes blade
-
HIKOKI C3606DPA(G5Z) 36V Brushless 165mm Plunge Cut Saw Bare Tool
$NZ925.00HiKOKI 36V Brushless 165mm Plunge Cut Saw brings premium high-powered cutting to site. Featuring a ‘Deep Cut’ configuration with a max cut of 66mm at 90°. the C3606DPA Premium Plunge Cut Saw also features soft-start for smooth start-ups, accurate precision cutting when fitted to a guide rail, and a variable speed function for greater control. The C3606DPA innovative double guide is designed for precise and accurate setting of the cutting depth and features a fast brake function for added safety.
-
HIKOKI C3607DB(G4Z) 36V Brushless 185mm Circular Saw Bare Tool
$NZ535.00HiKOKI High Powered 36V Brushless 185mm Circular Saw with 33% increased cutting speed compared to the previous model. Features all-new AUTO switch function that automatically increases torque when under heavy load to optimise cutting speeds and efficiencies.
