heavy
-
DEWALT 18V XR 55CM HEDGE TRIMMER – BARE UNIT
$315.00- POWER & RUN TIME – Power to do the Job, Run time for the day. 55cm blade & 75 minutes runtime
- CUT CAPACITY – 25 mm blade gap will guaranty higher performance and less jams
- EASE OF USE & ERGONOMICS – Lightweight and balanced to reduce user fatigue. 2.9 Kg, Overmould for higher comfort and better grip.
-
DEWALT 54V XR FLEXVOLT BRUSHLESS 3 MODE DEDICATED CORDLESS HAMMER BARE UNIT
$880.00Category-leading high speed drilling performance at more than 66 holes (18mm Ø x 80mm) per charge
Rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal
Brushless motor for extreme runtime and reduced maintenance
-
DEWALT DCD1623N-XJ 18V XR MAGNETIC DRILL WITH PERMANENT MAGNET – Bare Unit
$2,595.00- Maximum drilling capacity of 50 mm with annual cutters
- Brushless Motor provide corded drill performance and can complete 40x20mm Holes on 12 mm Steel per battery Charge (9 AH)
- 2 speed mechanical transmission along with 5 electronic variable speed in order to achieve optimal drilling speed for small and large diameter bits
-
DEWALT DCMPW1600N-XE 2X18V XR BRUSHLESS PRESSURE WASHER
Original price was: $805.00.$749.00Current price is: $749.00.- Completely Cordless cleaning solution – No access to power or mains water required. Powered by 2 x 18V XR Batteries, Self priming functionality means water can be drawn from a bucket or water butt.
- Suitable for cleaning tools, vehicles and site clean ups.
- Brushless motor provides improved run time and durability.
-
DEWALT DCS691X2-XE 54V XR FLEXVOLT 230mm Cut Off Saw Kit
$1,635.00- SUPPLIED WITH 2 X 9AH BATTERIES, CHARGER
- 54V FLEXVOLT Li-Ion battery enables corded performance from a cordless tool
- Durable high power Brushless motor for the toughest applications
- Rotatable guard gives 5 position for improved visibility when cutting in tight spots
-
DEWALT DCS777N-XJ 54V XR FLEXVOLT 216mm Mitre Saw – Bare Unit
$1,139.00- XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity
- 54V motor provides power and runtime for demanding construction applications
- Built on classic pull saw design improved and updated for the modern user
-
DeWalt DCZ507T2-XE XR Combo Kit – 18V/54V – 5 Piece
$2,249.00This XR Mixed Voltage 5 Piece Combo Kit includes DCD1007 18V XR 3 Speed Hammer Drill Driver, DCF860 18V XR 3 Speed Impact Driver, DCG418 54V XR FLEXVOLT 125mm Angle Grinder, DCS389 54V XR FLEXVOLT Reciprocating Saw, DCS578 54V XR FLEXVOLT 184mm Circular Saw, 2 x DCB546 18V/54V XR FLEXVOLT 6.0Ah Battery Pack, DCB118 18V XR 8A Fast Charger and Heavy Duty DWST1-81341 550mm Duffle Bag
-
DEWALT DWS777-XE 216mm (8 1/2″) Cross Cut Mitre Saw (XPS)
Original price was: $1,379.00.$1,265.00Current price is: $1,265.00.- The classic saw design improved and updated for the modern user
- New 1800 Watt motor for powerful cutting in all materials
- XPS Shadow line cut indicator provides fast accurate alignment of the blade while illuminating the work piece for increased productivity no adjustment required
-
FESTOOL 168mm Plunge Cut Saw in Systainer with 1400mm Rail-TS60K
$1,587.00Functions
Festool plunge-cut saws have been setting the standard for saws for decades. The TS 60 K is redefining this yet again. In the blink of an eye, the unique KickbackStop protects your workpiece and minimises the risk of injury. Perfectly coordinated with the entire Festool saw system and with a cutting depth of 60 mm.
The most versatile saw of its kind guarantees you premium work results. Of course, this is also the case for mitre cuts and solid worktops.
The TS 60 K now offers the unrivalled opportunity to combine it with the cross-cutting guide rail. In just a few steps, this produces a portable and easy-to-use compound mitre saw system for accurate angle cutting.
Thanks to the latest-generation brushless EC-TEC motor, the compact plunge-cut saw is extremely robust and powerful. It saws like a hot knife through butter, combining precision, flexibility and the highest cutting quality – whilst also offering enhanced safety. The TS 60 K: Worlds apart.
- Safer: The unique KickbackStop reduces the risk of injury caused by kickback during sawing or plunge-cutting into the workpiece
- Dive deeper: Greater cutting depth, at the same size and weight as the TS 55 F
- Versatile: Option to combine with the tried-and-tested guide rails and now with the FSK cross-cutting guide rails too
- Constant: EC-TEC motor in combination with the thin kerf saw blades ensures work progresses quickly whilst requiring less effort
- Precise: Simple, precise and repeatable mitre cuts can be achieved by setting mitre angles from -1° to 47°
- Convenient: The FastFix spindle stop and sophisticated design make it extremely easy to change the saw blade
- Best orientation: A transparent sliding viewing window provides a good view of the saw blade
-
FESTOOL 18V MITRE SAW KSC60 EB Li BASIC Slide Compound In Carton
$2,622.00Cordless Sliding compound saw KAPEX KSC 60
KAPEX KSC 60 E Li BASIC
Technical data
Battery reqd: 18/36V and min 5.2Ah Idle engine speed: 1300-1800/3500 min-1 Saw blade diameter: 216 mm Inclination angle: 47 °/47 ° Cutting depth 90°/90°: 305 x 60 mm Weight:with 2 batteries 18.5 kg Items included
KSC60, HW universal saw blade W36, workpiece clamp, LED spotlight, smart bevel, increase, dust catcher, Allen key 6mm, in a carton -
FESTOOL BS75E-SET Belt Sander in Systainer with Sanding Frame Set
$1,573.20Continuous precision
The 75 mm wide belt sander is the ideal tool for coarse and fine sanding of workpieces with absolute precision, parallel to the grain.
Working in only one direction along the grain prevents sanding rings from developing, thereby eliminating laborious and time consuming reworking. Easy to guide and comfortable to use, the BS 75 can also be quickly fitted to the flat area frame, significantly increasing the quality of your results.
The available bench set can also quickly and easily convert the belt sander to a bench-mounted unit, and clean working conditions are guaranteed when used with a Festool Dust Extractor.
Main Applications
- Fine sanding of flat surfaces
- Coarse sanding of flat surfaces
- Light sanding of high quality, veneered surfaces
- Sanding out planing blemishes
- Sanding strip material with the bench unit
-
FESTOOL CTM26E MOBILE DUST EXTRACTOR
$1,573.20Technical data
Power consumption: 350-1200 W Airflow max.: 3900 l/min Max. vacuum: 24000 Pa Filter surface area: 6318 cm2l Container/Filter bag capacity: 26/24 l Dimensions (L x W x H): 630 x 365 x 540 mm Weight: 13.99 kg Items included
SELFCLEAN filter bag, suction hose Ø 27/32 mm x 3.5 m-AS/CT, hose holder, cable holder, cleaning accessories, -
FESTOOL CTMC MIDI 15l M Class 18V Cordless Mobile Dust Extractor Basic
$1,437.50Functions
Comparable power to your corded version thanks to the 36 V turbine with 2 x 18 V battery packs (4.0/5.2/8.0 Ah). This makes it ideal for mobile sawing, sanding or drilling.
Ideal combination with Festool cordless tools. Convenient and fast: The extractor switches on automatically via the Bluetooth® battery pack.
Switching on the extractor via the remote control directly on the suction hose saves you a trip to the extractor. Ideal for occasional cleaning tasks. Adjustable suction power in three levels. The appropriate level can be selected depending on the application, which increases the battery runtime.
With four battery packs and the TCL 6 DUO rapid charger, work can be done in most cordless applications without interruptions. Smooth and effortless. The suction hose will impress you with flexible handling and a long service life. It glides over every edge and possesses conical geometry for increased suction power.
The large internal hose holder makes it easy to stow the suction hose, ensuring safe and clean transport.
With the manual main filter and filter bag dedusting, the suction power can be quickly and easily recovered when the filter or filter bag is clogged. This significantly increases the fill level.
Quick, easy and tool-free. The attachable accessory case means that you have everything to hand. It offers space for additional battery packs and cleaning accessories (case available as an accessory).
The cordless dust extractor is approved for harmful dust particles in dust class M with limit values ≥0.1 mg/m³. It is suitable for the extraction of wood and mineral dust.
The flat storage area on top of the hose holder can be used as a seat or as a shelf for working materials. Thanks to T-LOC, the extractor can be coupled with Systainers.
MAIN APPLICATIONS
- On-site extraction for cordless tools for minor or brief sanding, sawing and drilling work
- Ideal for mobile use in service and installation work and for final cleaning
- Suitable for both wet and dry extraction (special wet filter required for wet extraction)
- For hazardous wood dust and mineral dust from dust class M with limit values > 0.1 mg/m³
-
FESTOOL DF500 Q PLUS AND ASSORTMENT SYS
$2,585.20The DOMINO system unites the precision of a round dowel with the flexibility of a traditional flat dowel – the perfect solution for panel joints.
The system consists of the DF 500 dowel jointer, DOMINOs in different sizes and a wide range of accessories for special applications. The result: extremely strong, invisible joints. And DOMINO can do much more: rack joints, frame joints, drawer joints, etc.
-
HIKOKI D36DYA(G4Z) 36V Brushless 13mm Right Angle Drill Bare Tool
$919.00- Super heavy duty 36V brushless motor
- Drilling capacity with up to 159mm hole saw
- Reactive Force Control with Anti-kickback Safety Feature
- Heavy duty 13mm keyed chuck for superior bit retention
- 2-speed gear box
- Lightweight and well balance design
- Mechanical clutch
- Powered by MULTI VOLT (sold separately)
-
HIKOKI EC36DA(H4Z)
$699.00- Powerful 36V Brushless motor
- 17 sec. refill time (BSL36A18) or up to 15 sec. refill time (BSL36B18)
- All metal roll-cage for added durability
- Two easy to read gauges for tank pressure and regulated pressure
- Large on/off knob allows for easy control
- Oil-free design for low maintenance
- Compact hotdog tank design for easy transportation
- Max. working pressure 135psi
- Includes Nitto Style Coupling featuring a larger internal diameter, allowing an increased air volume to pass through the fitting for high demanding air tools
- Supplied without batteries and charger. Includes external intake filter, Nitto Style Coupling
-
HIKOKI G3613DB(GRZ) 36V High Powered 125mm Angle Grinder Kit
$885.00This highly innovative high powered and high precision 36V 125mm Angle Grinder has a huge cutting speeds of 1.6x faster than previous 18V models like the G18DBAL. This is the most advanced angle grinder available with high-tech safety features like anti-kickback and restart protection. Fitted with the new high-tech 36V brushless motor delivers more cutting and grinding performance, durability and reliability with an increase of 2x more overload capacity than the G18DBAL. This absolute power house is powered by HiKOKI’s new variable speed and AUTO Mode technology. Also features high-tech electronic brake system that stops the blade in less than 2 sec, no other Angle Grinder matches it’s performance and power.
-
HIKOKI KC366DC(GRZ) 36V Premium Brushless 6-Tool Kit
$3,319.00Product Info
- 36V Brushless 13mm 155Nm Impact Drill (DV36DC)
- 155Nm hard torque output
- Reactive Force Control with Gyro Sensor
- New optimally designed 36V High Performance brushless motor
- inverter circuit allows for continuously high speeds and under load operation
- Impact mode for concrete drilling
- Robust aluminium gear-case
- 36V Brushless 1/4″ 215Nm Impact Driver (WH36DC)
- 215Nm tightening torque
- Triple Hammer Design for powerful and smooth performance
- 4-stage tightening mode selector
- IP56 Water and Dust resistant
- Compact, powerful, brushless model with superior handling
- 36V Brushless 185mm Circular Saw (C3607DA)
- Silent mode
- Powerful cutting performance with overload protection
- Accurate cutting depth adjustment system
- Soft-start
- 36V High Powered brushless motor
- Backwards dust exhaust
- 36V Brushless High Powered 125mm Angle Grinder (G3613DVF)
- Outstanding grinding power equivalent to 1500W Max Output
- Self Protection Mode – Reduces power output in event of overheating
- Anti-kickback, brake and restart protect
- 36V Brushless Heavy Duty Sabre Saw (CR36DA)
- Heavy Duty twin rotation counterweight drive system
- UVP Anti-vibration system
- 4-stage selector – low, medium, high and AUTO mode
- 36V Brushless 28mm SDS+ Rotary Hammer (DH3628DC)
- Quick-release chuck to accept 13mm standard drill bits
- UVP User Vibration Protection
- Reactive Force Control (RFC)
- AUTO-stop function for consistently drilling hole depth
- Supplied with 2 x 1080W Multi Volt batteries (BSL36A18), 32 min. Rapid Smart Charger and X-Large Tool Bag
-
MAKITA AC001GZ 40Vmax XGT Brushless Air Compressor
$799.00- High airflow at 34L/min in a compact light weight design for maximum portability
- Low noise design at only 68dB for comfortable use indoors
- High durability roll-cage construction provides protection to withstand jobsite environments
- Up to 1,400x 50mm 18Ga nails continuously driven on a single 8.0Ah
- Rapid 100 second full tank fill from empty
-
MAKITA CF003GZ 40Vmax XGT 450mm Jobsite Fan
$725.00- Automatic oscillating fan increases airflow dispersion
- Powered by either 40Vmax XGT batteries, 18V LXT batteries or AC power
- 120m/min maximum air speed with Variable speed control rotary knob
- Off timer function with 1,2 and 4 hour settings
- Quiet running noise level of only 55dB due to redesigned fan blades
-
MAKITA DA001GM101 40Vmax XGT Brushless Right Angle Drill
$1,149.00- Massive drilling capacity with up to 159mm hole saw capacity
- Automatic Torque Drive increases torque to power through any task
- 136Nm of max torque with a torque limiter reducing kickback if the bit binds
- High durability 13mm keyed chuck for secure bit retention
- 2 speed mechanical clutch for high speed and high torque applications
-
MAKITA DK0210G801 40Vmax Brushless 8-Pc.Combo (4.0Ah) Kit
$4,139.00- HP001G 40Vmax XGT Brushless Hammer Driver Drill
- TD003G 40Vmax XGT Brushless Impact Driver
- HS012G 40Vmax XGT Brushless 165mm (6- ½”) Circular Saw
- GA013G 40Vmax XGT Brushless 125mm (5″) Paddle switch Angle Grinder
- JR001G 40Vmax XGT Brushless Recipro Saw
- AS001G 40Vmax XGT Brushless Dust Blower
- KP001G 40Vmax XGT Brushless 82mm Planer
- RT001G 40Vmax XGT Brushless AWS Laminate Trimmer
-
MAKITA DLM464PT2 18Vx2 (36V) LXT Brushless 460mm (18″) Metal Deck Lawn Mower kit
$1,029.00DLM464PT2
supplied with 2x 5.0Ah batteries (BL1850) & Dual rapid charger (DC18RD)Included accessories
Box Wrench 17 (782210-8), Grass Catcher (127697-1), Start Key (643535-4), Bar Blade Set and (199367-2) Mulching Plug (671 005 177)
