Makita
-
MAKITA DVC750LZX1 18V LXT Brushless Wet/Dry Dust Extractor
$NZ395.00- 2 Stage power selection for optimum suction performance
- Approved for dust class L of EC regulation
- 7.5L Tank capacity with HEPA filter
- 6.7kPa Max sealed air suction
- Compact and lightweight at 4.6kg with battery
- Up to 35 minutes runtime on high power selection
-
MAKITA DX06 – Dust Extractor Attachment with HEPA Filter
Original price was: $NZ198.30.$NZ179.00Current price is: $NZ179.00.- Impact filter cleaning mechanism – Turn the dial to impact the filter case releasing the dust from the filter
- HEPA filtration system – Captures 99.97% of concrete dust particulates 0.3 microns and larger
- 2 Stage Dust Extraction Nozzle – Stage 1 drill bits 110 mm to 165 mm / Stage 2 drill bits 210 mm to 265 mm
- Adjustable depth stop – with 5 mm increments
- DX Extractors – Powered by a separate motor allowing the rotary hammer to maintain peak drilling performance
Dust filter cleaning dial:
- Removes excess dust from filter
- Maintains vacuum efficiency and performance
-
MAKITA E-05169 3 Pouch Tool Belt Set
Original price was: $NZ216.30.$NZ179.00Current price is: $NZ179.00.- Three Pouches, five pockets, thirty holders
- Pouches retain their shape thanks to 3L Technology
- Keeps all your fixings and tools accessible – just around your waist
- Five capacious pockets for all your stuff
- Six leather holders for real strength and durability
- Two Belt Loop Holders included
- Ten elastic loops for easy access to tools and additional screwdrivers outside the pockets
Length: 640mm Width: 145mm Height: 270mm Weight: 1.34kg
-
MAKITA E-18954 Impact XPS ¼” x50mm Socket Adapter
$NZ8.90Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS ¼” Square 150mm Socket Adapters are designed exclusively for use with high-torque impact drivers. Chamfered edges of the square drive end allows for easy installation. The high quality steel construction provides increased durability and features a matte nickel surface for best in class corrosion resistance
- Ideal for use with high torque impact drivers and driver-drills
- Chamfered edges of square drive end allow easy installation socket
- Calibrated heat treating process for added durability
- Matte Nickel surface for best in class corrosion resistance
-
MAKITA EFFICUT 165mm Multi-Purpose Blade
Original price was: $NZ132.30.$NZ105.00Current price is: $NZ105.00.E-16776 (165mm x 20mm x 54T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.5mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 35% More Efficient compared to (B-56823)
- 35% More cuts per charge compared to (B-56823)
- Centre/Arbor – 20mm
- Bush – 15.88mm
-
MAKITA EFFICUT 185mm Multi-Purpose Blade
Original price was: $NZ123.90.$NZ105.00Current price is: $NZ105.00.E-16829 (185mm x 20mm x 60T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.7mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 100% More Efficient compared to (B-15578)
- 100% More cuts per charge compared to (B-15578)
- Centre/Arbor – 20mm
- Bush – 15.88mm
-
MAKITA EFFICUT 190mm Multi-Purpose Blade
Original price was: $NZ154.20.$NZ135.00Current price is: $NZ135.00.E-16879 (190mm x 20mm x 60T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.7mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 50% More Efficient compared to (B-15615)
- 50% More cuts per charge compared to (B-15615)
-
MAKITA EFFICUT 260mm Multi-Purpose Blade
Original price was: $NZ225.00.$NZ199.00Current price is: $NZ199.00.E-07288 (260mm x 30mm x 81T)
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.85mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
- 36% More Efficient compared to (B-15637) Aluminium Blade
- 103% More cuts per charge compared to (B-15637) Aluminium Blade
- Centre/Arbor – 30mm
- Bush – 25.4mm
-
MAKITA EFFICUT 270mm Wood Cutting Blade 24T (E-12952)
$NZ125.80Specifications
Part # Description (Dia x Bore x Teeth) (mm) Kerf (mm) Rake (Deg°) Ring (mm) Max Speed (RPM) E-12952 270 x 24T x 30mm 2.15mm 23º 30 5,650min-1 EFFICUT series TCT saw blades made specially for cordless saws Ultra-thin, perfectly tensioned steel plates for true run. This saves precious battery power and life Precision honed, high-grade carbide for easy, smooth cuts and long life mm arbour ring is added
-
MAKITA EFFICUT 305mm Multi-Purpose Blade
Original price was: $NZ224.10.$NZ199.00Current price is: $NZ199.00.E-13269 – 305mm x 30 x 81T
20% Faster Cut Speed compared to (B-15671) Aluminium Blade
- Centre/Arbor – 30mm
- Bush – 25.4mm
The Efficut Multi-purpose features (SMTCG) Special mod Triple chip ground, Reduced tooth face and increases efficiency of off cut removal. Blade is Laser etched back filled with resin for less noise and vibration. 1.65mm thin kerf to reduce load during cutting for longer runtime. Suitable for cutting MDF, Laminated chipboard, no-ferrous metals (such as aluminium, copper, lead, nickel, tin, titanium and zinc, and alloys such as brass.) Ideal for Cordless & 240V Circular and Mitre saws
-
MAKITA FN001GZ 40Vmax XGT Brushless 18 Gauge Brad Nailer skin
$NZ725.00Included accessories
Hex wrench (783201-2), Nose adaptor S (422665-2), Clip (346317-0), Screw M4x12 (251314-2)
Optional accessories
18Ga C1 Brad Nail 15mm Length (F-31867)
18Ga C1 Brad Nail 20mm Length (F-31870)
18Ga C1 Brad Nail 25mm Length (F-31883)
18Ga C1 Brad Nail 30mm Length (F-31896) -
MAKITA GA5040C 125mm 1,400W Variable Speed Angle Grinder
$NZ345.00- Super Joint System II developed for effective vibration absorption
- Electronic current limiter, speed control and soft start
- Anti-restart function
- Re-designed durable gear housing
- Ergonomically best possible barrel grip
- Variable speed
-
MAKITA GA9040SK01 230mm (9″) 2,300W Angle Grinder
$NZ559.00- Low vibration rear handle & rubberised soft-grip enhances operator comfort and control
- Superior anti-dust, and labyrinthal bearing-protective construction
- Powerful 2,300W motor
- Quality machined bevel gears
- Increased heat resistance with increased varnish to windings
-
MAKITA Guide Rail 1.4M (194368-5)
Original price was: $NZ202.50.$NZ175.00Current price is: $NZ175.00.The Makita 1.4M Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts
- 1,400mm guide rail for use with Makita Plunge Saw models
- Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
- Ideal for ripping sheet material
- Alternate use with select routers and circular saws, must use with router guide rail adaptor (194579-2) and saw guide rail adaptor (196953-0)
-
MAKITA GUIDE RAIL Adaptor (198673-2) – DCC501
$NZ46.50A guide rail system is a more portable solution for precision cutting, so get the right accessories for use with your Makita 1.4M and 3.0M guide rails. The Guide Rail Adapter (198673-2) is an innovative solution for accurate cutting when used with the Makita 125mm (5″) Masonry Saw models (DCC501,4100NH2ZX, 4100NH3ZX) and Guide Rails (saw and rails sold separately). The Guide Rail Adapter installs quickly and easily, and is engineered with quality materials for long service life
- Precision design for accurate cutting
- Quick and easy to install for added user convenience
- Compatible with Makita 1.4M (194368-5), 3.0M (194367-7) as well as select competitor rails
-
MAKITA Guide Rail Connector Set Twin Pack (198885-7)
Original price was: $NZ74.20.$NZ65.00Current price is: $NZ65.00.The Makita 198885-7 Guide Rail Connectors (x2 in this twin pack) are designed to join guide rails together to allow the user to make longer cuts while maintaining the accuracy they desire. The connectors install quickly for added convenience. These versatile connectors work with Makita guide rails as well as select competitor rails (please check compatibility before purchase). Makita recommends the use of x2 joining bars to securely join x2 guiderails
-
MAKITA Guide rail Quick Clamp Set (199826-6)
Original price was: $NZ207.90.$NZ175.00Current price is: $NZ175.00.The Makita 2-Pc. Clamp Set (199826-6) is engineered for use with the Makita Corded and Cordless Plunge Circular Saws and one of the Makita Guide Rails (199140-0,194925-9, E-10936 ). The clamp set is engineered to hold the guide rail securely in place. the result is a more portable option to a table saw for ripping sheet material
- Quick fix clamps to suit SP6000, DSP600 and DSP601
- Designed to clamp material to guide rail allowing a more secure working environment
- Conveniently adjustable for securing varying sized material
- Quick fix and release system
- Easy to use ratcheting
- Adjustable Length with max 150mm clamping
-
MAKITA HP001GZ 40Vmax XGT Brushless Hammer Drill Driver
$NZ469.00- Heavy duty power with 141Nm peak torque
- Active Feedback Technology – sensors shut down the tool in the event of a kickback
- Massive drilling capacity with 152mm hole saw & 50mm auger bit capacity
- 35% faster drilling speed compared with the equivalent 18V model
- Electronic clutch for selecting between 41 torque range settings
-
MAKITA HR010GZ 40Vmax XGT Brushless 20mm Rotary Hammer skin
$NZ485.00- Compact & lightweight design ideal for working in tight and overhead applications
- Anti-Vibration Technology (AVT) provides extremely low vibration
- 2.1J* of impact energy deliver rapid drilling speeds
- Constant speed control maintains drilling speed under load
- 3-Mode operation for “Rotation Only” or “Hammering with Rotation” or “Hammer Only” for multiple applications
- AWS receiver and Dust extraction adapter sold separately **Rating in accordance with EPTA 05/2009
-
MAKITA HR2652 26mm SDS-Plus HEPA Rotary Hammer
$NZ615.00- 3 mode operation: Rotation only, Rotation and Hammering
- Built in dust extractor equipt with HEPA filter
- 800W motor providing 2.2J** of hitting energy
- 12.5m/s² of vibration Hammer Drilling into Concrete
- ** Rating in accordance with EPTA 05/2009
-
MAKITA HR3011FC 30mm SDS-Plus Rotary Hammer with DX10
$NZ859.00- 3 mode operation: Rotation only, Rotation and Hammering, Hammering
- Only 9.5m/s² of vibration thanks to AVT (Anti-Vibration Technology)
- High 1,050W* motor provides 3.9J * of hitting energy
- Variable speed by dial with constant speed control
- Torque limiter protects tool and operator if the bit should jam
-
MAKITA HS012GZ 40Vmax XGT Brushless 165mm (6- ½”) Circular Saw
$NZ549.00- Heavy duty power cutting 40% faster than the 18V equivalent model
- Max cut capacity of up to 57mm with 50° bevel capacity, 22.5°, 45° positive stops
- Constant speed control maintains cutting speed under heavy load
- Compatible with AWS* for wireless connectivity with compatible dust extraction
- Die-cast magnesium base, blade guard, and blade cover provide a lightweight design
*Requires optional wireless transmitter
-
MAKITA HS013GZ 40Vmax XGT Brushless 415mm (16-⁵⁄₁₆”) Circular Saw
- Heavy duty power Cuts through beams and sleepers up to 150mm thick in a single pass, rivaling corded models
- Achieves a cutting depth of 158mm at 0° and 106mm at 45°
- .5kg lighter than the 240V corded version, enhancing manoeuvrability and reducing fatigue
- Safety protection with electric brake and soft start for user safety
- Compatible with AWS* for wireless connectivity with compatible dust extraction
-
MAKITA IMPACT X Screwdriver Bit Set – 35 PC
Original price was: $NZ46.00.$NZ30.00Current price is: $NZ30.00.MAKITA® IMPACT-X™ is a line of impact-rated insert bits and fastening accessories built specifically for the demands of the professional tradesman. Professionals require commercial duty bits and fastening accessories that can endure the force of high-volume screw driving applications with high torque impact drivers. Standard screwdriving bits are brittle and fit poorly into fasteners, and in applications with high torque impact drivers this losing combo quickly leads to broken bits.
IMPACT-X™ hits back with improved fitment and increased performance with high torque impact drivers. Precision machined (not forged) tips ensure full contact fit, while performance-optimized and heat-treated S2 steel provides more flex and more durability than standard, brittle bits.
Features
- IMPACT-X™ Bits:
-
- Precision Machined Tips with superior fitment – For full contact fit and longer life
- Performance-Optimized S2 Steel Construction – For extended life
- Calibrated Heat Treating Process – For added durability
- Manganese Phosphate Surface – For advanced corrosion resistance
- Optimal Tip Geometry – For an ideal fit and improved holding power
-
- XPAND Storage System:
-
- Removable Storage Bars – Enables customisation of contents
- Rotatable Bit Keepers – Rotate up to 90° for easier bit removal
- Centre Storage Tube – Holds additional bits (up to 50 x Insert Bits)
-
- IMPACT-X™ Bits:
-
MAKITA Impact XPS #1 Square 75mm Power Bit, 2/pk (E-18677)
$NZ11.00Precision machined tips, torque absorbing power rings, an optimized torsion zone, and high quality steel combine to deliver improved overall performance and bit life
Lasts up to 100X longer than standard impact bits
Precision machined tips provide a superior full contact fit for improved holding power and longer life
Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
Heat treating process precisely calibrated for added durability
Matte Nickel surface for best in class corrosion resistance
Premium, high-grade steel composition is masterfully engineered for extended life
Laser etched for easy size identification
Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
For use with high torque impact drivers and driver-drills -
MAKITA Impact XPS #2 Pozi x 50mm Power Bit, 3/pk (E-19370)
$NZ9.10FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
Product Type : Power Bits
Tip Size : PH2
Shank Type : 1/4″ Hex
Overall length: 50mm
Package Quantity: 3pcs -
MAKITA Impact XPS #8 Slotted x 50mm Power Bit, 3/pk (E-19342)
$NZ7.60FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
Product Type : Power Bits
Tip Size : #8
Bit Fitment : Slotted
Shank Type : 1/4″ Hex
Overall length: 50mm
Package Quantity: 3pcs -
MAKITA Impact XPS 1/2″ SQ x 50mm Socket Adaptor (E-18976)
$NZ10.30FEATURES:
Ideal for use with high torque impact drivers and driver-drills
Chamfered edges of square drive end allow easy installation socket
Retention ball helps secure the socket
Heat treating process precisely calibrated for added durabilitySPECIFICATIONS:
Tip Size : 1/2″
Bit Fitment : Square SQ
Shank Type : 1/2″ Hex
Overall Length: 50mm -
MAKITA Impact XPS 3/8″ X150mm Nutsetter (E-18948)
$NZ23.40FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer lifeSPECIFICATIONS:
Tip Size : 1/4″
Bit Fitment : Hex
Shank Type : 1/4″ Hex
Overall Length: 150 -
MAKITA Impact XPS 3/8″ x50mm Socket Adapter (E-18960)
$NZ9.90Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS ¼” Square 150mm Socket Adapters are designed exclusively for use with high-torque impact drivers. Chamfered edges of the square drive end allows for easy installation. The high quality steel construction provides increased durability and features a matte nickel surface for best in class corrosion resistance
Ideal for use with high torque impact drivers and driver-drills
Chamfered edges of square drive end allow easy installation socket
Calibrated heat treating process for added durability
Matte Nickel surface for best in class corrosion resistance -
MAKITA Impact XPS 5/16″ Magnetic 65mm Nutsetter, 2/pk (E-18873)
$NZ19.60FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer lifeSPECIFICATIONS:
Tip Size : 1/4″
Bit Fitment : Hex
Shank Type : 1/4″ Hex
Overall Length: 65mm -
MAKITA Impact XPS 5/16″ X150mm Nutsetter (E-18932)
$NZ23.40FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer lifeSPECIFICATIONS:
Tip Size : 1/4″
Bit Fitment : Hex
Shank Type : 1/4″ Hex
Overall Length: 150 -
MAKITA Impact XPS 65mm Magnetic 3/8″ Nutsetter 2/pk (E-18895)
$NZ19.60Powerful magnetisation provides convenient pick-up and retention of fasteners
Lobular design drives along flats to reduce rounding of hex fasteners
Flat edges at hex opening for full contact with flanged hex head screws
Rare earth magnet increases holding power compared to standard magnets Premium, high-grade steel composition is masterfully engineered for extended life
Heat treating process precisely calibrated for added durability
Matte Nickel surface for best in class corrosion resistance
Ideal for driving hex head nuts and self-tapping screws in a wide variety of high-demand applications
For use with high torque impact drivers and driver-drills -
MAKITA Impact XPS Hex 2.5 X50mm 3/pk (E-19392)
$NZ8.40IMPACT XPS Hex 2.5 x50mm 3PK (E-19392) is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS Hex 2.5 x50mm 3PK (E-19392) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS Hex 3 X50mm 3/pk (E-19401)
$NZ8.40IMPACT XPS Hex 3 x50mm 3PK (E-19401) is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS Hex 3 x50mm 3PK (E-19401) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS Hex 4 X50mm 3/pk (E-19417)
$NZ8.00IMPACT XPS Hex 4 x50mm 3PK (E-19417) is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS Hex 4 x50mm 3PK (E-19417) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS HEX-5 X50mm Drive bit, 3/pk (E-19423)
$NZ8.40Impact XPS HEX-5mm Drive bit, 3/pk (E-19423) is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. Impact XPS HEX-5mm Drive bit, 3/pk (E-19423) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS Impact Bit Set 29/pk (E-19261)
Original price was: $NZ98.30.$NZ75.00Current price is: $NZ75.00.Makita’s new XPS range of screwdriver bits & holders provided with pulse torsion zone technology, is the next generation of premium fastening accessories for trade use, engineered to withstand the high torque provided by current impact drivers as well as for use in drill/drivers and screwdrivers. The Impact XPS series is expertly engineered to the highest quality for exceptional product life, meaning less wasted time for trades due to broken bits. Three unique features combined together, deliver a performance life of up to 90 times longer than standard screwdriver bits – Exact Fitment, Pulse Torsion Ring and Zone, & Unique Steel Blend. These three unique features combined, deliver a performance life of up to 90 times longer than standard bits. The Impact XPS range is also provided with a matte nickel coating for increased corrosion resistance
-
MAKITA Impact XPS PH-1 x 150mm Power Bit (E-19071)
$NZ8.70FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Bit Fitment : Phillips
- Shank Type : 1/4″ Hex
- Tip Size : PH1
- Overall Length: 150mm
- Package Quantity: 1pc
-
MAKITA Impact XPS PH-2 x 150mm Power Bit (E-19087)
$NZ8.70- Precision machined tips, torque absorbing power rings, an optimised torsion zone, and high quality steel combine to deliver improved overall performance and bit life
- Lasts up to 100X longer than standard impact bits
- Precision machined tips provide a superior full contact fit for improved holding power and longer life
- Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
- Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
- Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
- Heat treating process precisely calibrated for added durability
- Matte Nickel surface for best in class corrosion resistance
- Premium, high-grade steel composition is masterfully engineered for extended life
- Laser etched for easy size identification
- Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
- For use with high torque impact drivers and driver-drills
-
MAKITA Impact XPS PH-2 x 50mm Bits 3/pk (E-18443)
$NZ7.80- Precision machined tips, torque absorbing power rings, an optimized torsion zone, and high quality steel combine to deliver improved overall performance and bit life
- Lasts up to 100X longer than standard impact bits
- Precision machined tips provide a superior full contact fit for improved holding power and longer life
- Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
- Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
- Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
- Heat treating process precisely calibrated for added durability
- Matte Nickel surface for best in class corrosion resistance
- Premium, high-grade steel composition is masterfully engineered for extended life
- Laser etched for easy size identification
- Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
- For use with high torque impact drivers and driver-drills
-
MAKITA Impact XPS PH-2 x 75mm Driver Bit 2/pk (E-18627)
$NZ11.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Bit Fitment : Phillips
- Shank Type : 1/4″ Hex
- Tip Size : PH2
- Overall Length: 75mm
- Package Quantity: 2pcs
-
MAKITA Impact XPS PH-3 x150mm 1/pk (E-19093)
$NZ8.70- Precision machined tips, torque absorbing power rings, an optimized torsion zone, and high quality steel combine to deliver improved overall performance and bit life
- Lasts up to 100X longer than standard impact bits
- Precision machined tips provide a superior full contact fit for improved holding power and longer life
- Unique Torque Absorbing Shoulder Power Rings help to improve bit life by absorbing and transferring torque at bit tip to the torsion zone
- Optimised Torsion Zone geometry facilitates an ideal transfer of impact energy for improved bit life
- Cone shape designed base with torsion power rings to distribute impact force from shank to torsion zone
- Heat treating process precisely calibrated for added durability
- Matte Nickel surface for best in class corrosion resistance
- Premium, high-grade steel composition is masterfully engineered for extended life
- Laser etched for easy size identification
- Engineered to withstand the extreme power of high-torque impact drivers and to last longer than standard impact bits
- For use with high torque impact drivers and driver-drills
-
MAKITA Impact XPS SQ-1 150mm 1/pk (E-19102)
$NZ8.40FEATURES:
Last up to 100 x longer compared to standard bits
Precision machined tips with a full contact fit
Pulse Torsion Zone for better transfer of impact power
Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
Size: 150mm Bits: 1pc -
MAKITA Impact XPS SQ-2 75Mm 2/pk (E-18683)
$NZ11.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Size: 75mm
- Bits: 2pk
-
MAKITA Impact XPS SQ-2 x 50mm 3/pk (E-18502)
$NZ8.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Size: 50mm
- Bits: 3pcs
-
MAKITA Impact XPS SQ-2 x150mm 1/pk (E-19118)
$NZ8.70FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Size: 150mm
- Bits: 1pk
-
MAKITA Impact XPS SQ-3 50mm 3/pk (E-18524)
$NZ8.20Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The IMPACT XPS SQ3 50mm 3PK (E-18524) are designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS SQ3 50mm 3PK (E-18524) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS SQ-3 75mm 2/pk (E-18708)
$NZ11.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Size: 75mm
- SQ3
- Bits: 2pcs
-
MAKITA Impact XPS T10 Torx 50mm Power Bit, 3/pk (E-18530)
$NZ8.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Tip Size : T10
- Bit Fitment : Torx
- Shank Type : 1/4″ Hex
- Size: 50mm
- Bits: 3pcs
-
MAKITA Impact XPS T20 Torx 50mm Power Bit, 3/pk (E-18552)
$NZ7.80Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS T20 Torx 50mm Power Bit, 3/pk (E-18552) are designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. Impact XPS T20 Torx 50mm Power Bit, 3/pk (E-18552) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS T25 Torx 150Mm 1/pk (E-19146)
$NZ7.20Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The IMPACT XPS T25 TORX 150mm 1PK (E-19146) are designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. IMPACT XPS T25 TORX 150mm 1PK (E-19146) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA Impact XPS T25 Torx 50mm Power Bit, 3/pk (E-18574)
$NZ8.20FEATURES:
- Last up to 100 x longer compared to standard bits
- Precision machined tips with a full contact fit
- Pulse Torsion Zone for better transfer of impact power
- Unique carbon alloy steel blend flexes for longer life
SPECIFICATIONS:
- Tip Size : T25
- Bit Fitment : Torx
- Shank Type : 1/4″ Hex
- Size: 50mm
- Bits: 3pcs
-
MAKITA Impact XPS T30 Torx 50mm Power Bit, 3/pk (E-18605)
$NZ8.20Makita Impact XPS is new innovation in fastening with insert bits and fastening accessories built for the demands of the professional contractor. The Impact XPS T30 Torx 50mm Power Bit, 3/pk (E-18605) are designed exclusively for use with high-torque impact drivers, and are engineered to last up to 90-times longer than standard insert bits. High-strength steel delivers longer bit life, and the precision-fit tip is engineered to prevent “cam-out” and stripping. The torsion section of the bit flexes under load to take pressure off of the bit tip for increased durability. The high quality steel construction is engineered for increased durability and features a matte nickel surface for best in class corrosion resistance. Impact XPS T30 Torx 50mm Power Bit, 3/pk (E-18605) are ideal for the most demanding jobs including deck building, framing, installing plywood subfloor, and more
-
MAKITA JN1601 1.6mm Nibbler (Metal Cutting)
$NZ835.00- Precise, curved and straight cuts from slim and powerful performer
- Cuts flat and corrugated sheet metal with the same die
- Rotatable die for ease of operation via supplied spanner
- Note: When cutting aluminium a coolant such as CRC, WD40 or INOX spray is required
-
Makita JR001G 40Vmax XGT Brushless Recipro Saw
$NZ439.00- High performance cutting speeds up to 35% faster than the equivalent 18Vx2 model
- Massive cutting capacity with the ability to cut wood up to 255mm wide
- High durability construction with battery vibration suppression protecting the battery
- Blade ejection lever for convenient removal without having to touch the blade
- Electric speed selector, high speed for wood cutting & low speed for metal cutting
-
Makita JR002G 40Vmax XGT Brushless Recipro Saw
$NZ529.00- High performance cutting speeds up to 35% faster than the Predecessor Model*
- Massive cutting capacity with the ability to cut wood up to 255mm wide
- Anti-Vibration Technology (AVT) an internal counterbalance system significantly reducing vibration down to 50%*
- 2 speed change lever mode Orbital action or Straight cutting action
- Blade ejection lever for convenient removal without having to touch the blade
-
MAKITA JV001GZ 40Vmax XGT Brushless Barrel Handle Jigsaw skin
$NZ445.00- Constant speed control maintains cutting speed under load
- Tool-less blade change for quick and convenient blade changes
- Compact and lightweight design for enhanced maneuverability
- 3 orbital settings plus straight cutting deliver faster and more accurate cuts in a variety of materials
- Variable control dial enables user to match the speed to the application
-
MAKITA JV002GZ 40Vmax XGT Brushless D-Handle Jigsaw skin
$NZ485.00- Constant speed control maintains cutting speed under load
- Tool-less blade change for quick and convenient blade changes
- Compact and lightweight design for enhanced maneuverability
- 3 orbital settings plus straight cutting deliver faster and more accurate cuts in a variety of materials
- Variable control dial enables user to match the speed to the application
-
MAKITA KP001GZ 40Vmax XGT Brushless 82mm Planer skin
$NZ545.00- High powered brushless motor allows for a massive 4mm maximum cutting depth
- Auto-start Wireless System (AWS) for on demand dust extraction*
- 15,000rpm no load speed for rapid cutting speeds
- Left or right-side chip ejection
- Electric brake & foot on base plate protect workpiece from damage
-
MAKITA LS0816F 216mm (8-½”) Slide Compound Miter Saw
AVAILABLE INSTORE ONLY – NOT ABLE TO BE SHIPPED
- Maximum cut capacity of 65 x 305mm at 0°
- 47° left and 2° right bevel capacity, 47° left and right mitre cuts
- 1,200W* motor delivers 5,000rpm no load speed
- Dual linear ball bearing rails for smooth accurate cutting
- LED job light with shadow line for easy cut alignment
-
MAKITA LS1110F 260mm (10-1/4″) Slide Compound Mitre Saw
AVAILABLE INSTORE ONLY – NOT ABLE TO BE SHIPPED
- Maximum cut capacity of 91 x 310mm at 0°
- 47° left and 2° right bevel with mitre cuts at 47° left and right
- 1,450W* motor delivers 4,500rpm no-load speed
- Dual linear ball bearing rails for smooth accurate cutting
- Shadow line for easy cut alignment
